The termination unit.
Parsed from file VDSL2-LINE-MIB.mib
Module: VDSL2-LINE-MIB
The termination unit.
The termination unit.
Parsed from file VDSL2-LINE-MIB.my.txt
Company: None
Module: VDSL2-LINE-MIB
The termination unit.
xdsl2ChStatusUnit OBJECT-TYPE SYNTAX Xdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { xdsl2ChannelStatusEntry 1 }
xdsl2ChStatusUnit OBJECT-TYPE SYNTAX Xdsl2Unit ACCESS not-accessible STATUS mandatory DESCRIPTION "The termination unit." ::= { xdsl2ChannelStatusEntry 1 }
Vendor: Cisco Systems
Module: VDSL2-LINE-MIB (VDSL2-LINE-MIB-V1SMI.my)
Type: TABULAR
Access: not-accessible
Syntax: Xdsl2Unit
Automatically extracted from www.mibdepot.com
xdsl2ChStatusUnit OBJECT-TYPE SYNTAX Xdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { xdsl2ChannelStatusEntry 1 }
xdsl2ChStatusUnit OBJECT-TYPE SYNTAX Xdsl2Unit MAX-ACCESS not-accessible STATUS current DESCRIPTION "The termination unit." ::= { xdsl2ChannelStatusEntry 1 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.251.1.2.2.1.2 | xdsl2ChStatusActDataRate | 0 | 0 | The actual net data rate at which the bearer channel is operating, if in L0 power management state. In L1 or L2 states, it relat… |
1.3.6.1.2.1.10.251.1.2.2.1.3 | xdsl2ChStatusPrevDataRate | 0 | 0 | The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a fu… |
1.3.6.1.2.1.10.251.1.2.2.1.4 | xdsl2ChStatusActDelay | 0 | 0 | The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management … |
1.3.6.1.2.1.10.251.1.2.2.1.5 | xdsl2ChStatusActInp | 0 | 0 | Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0… |
1.3.6.1.2.1.10.251.1.2.2.1.6 | xdsl2ChStatusInpReport | 0 | 0 | Impulse noise protection reporting mode. |
1.3.6.1.2.1.10.251.1.2.2.1.7 | xdsl2ChStatusNFec | 0 | 0 | Actual size of Reed-Solomon codeword. This parameter reports the actual number of Reed-Solomon redundancy bytes per codeword used… |
1.3.6.1.2.1.10.251.1.2.2.1.8 | xdsl2ChStatusRFec | 0 | 0 | Actual number of Reed-Solomon redundancy bytes. This parameter reports the actual number of Reed-Solomon redundancy bytes per cod… |
1.3.6.1.2.1.10.251.1.2.2.1.9 | xdsl2ChStatusLSymb | 0 | 0 | Actual number of bits per symbol. This parameter reports the actual number of bits per symbol assigned to the latency path in whi… |
1.3.6.1.2.1.10.251.1.2.2.1.10 | xdsl2ChStatusIntlvDepth | 0 | 0 | Actual interleaving depth. This parameter reports the actual depth of the interleaver used in the latency path in which the beare… |
1.3.6.1.2.1.10.251.1.2.2.1.11 | xdsl2ChStatusIntlvBlock | 0 | 0 | Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in w… |
1.3.6.1.2.1.10.251.1.2.2.1.12 | xdsl2ChStatusLPath | 0 | 0 | Actual latency path. This parameter reports the index of the actual latency path in which the bearer is transported. The valid val… |
1.3.6.1.2.1.10.251.1.2.2.1.13 | xdsl2ChStatusAtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is ATM. This is a bitmap of possible condit… |
1.3.6.1.2.1.10.251.1.2.2.1.14 | xdsl2ChStatusPtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is PTM (Packet Transfer Mode). This is a bit… |