Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1.
Parsed from file VDSL2-LINE-MIB.mib
Module: VDSL2-LINE-MIB
Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1.
xdsl2ChStatusIntlvBlock OBJECT-TYPE
SYNTAX Unsigned32(4..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)"
DEFVAL { 4 }
View at oid-info.com
Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1.
Parsed from file VDSL2-LINE-MIB.my.txt
Company: None
Module: VDSL2-LINE-MIB
Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
The value ranges from 4 to 255 in steps of 1.
xdsl2ChStatusIntlvBlock OBJECT-TYPE SYNTAX Unsigned32(4..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in which the bearer channel is transported. The value ranges from 4 to 255 in steps of 1." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)" DEFVAL { 4 } ::= { xdsl2ChannelStatusEntry 11 }
xdsl2ChStatusIntlvBlock OBJECT-TYPE SYNTAX Gauge(4..255) ACCESS read-only STATUS mandatory DESCRIPTION "Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in which the bearer channel is transported. The value ranges from 4 to 255 in steps of 1." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)" DEFVAL { 4 } ::= { xdsl2ChannelStatusEntry 11 }
Automatically extracted from RFC5650
xdsl2ChStatusIntlvBlock OBJECT-TYPE SYNTAX Unsigned32(4..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in which the bearer channel is transported. The value ranges from 4 to 255 in steps of 1." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)" DEFVAL { 4 } ::= { xdsl2ChannelStatusEntry 11 }
xdsl2ChStatusIntlvBlock OBJECT-TYPE SYNTAX Unsigned32(4..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in which the bearer channel is transported. The value ranges from 4 to 255 in steps of 1." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5 (INTLVBLOCK)" DEFVAL { 4 } ::= { xdsl2ChannelStatusEntry 11 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.251.1.2.2.1.1 | xdsl2ChStatusUnit | 0 | 0 | The termination unit. |
| 1.3.6.1.2.1.10.251.1.2.2.1.2 | xdsl2ChStatusActDataRate | 0 | 0 | The actual net data rate at which the bearer channel is operating, if in L0 power management state. In L1 or L2 states, it relat… |
| 1.3.6.1.2.1.10.251.1.2.2.1.3 | xdsl2ChStatusPrevDataRate | 0 | 0 | The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a fu… |
| 1.3.6.1.2.1.10.251.1.2.2.1.4 | xdsl2ChStatusActDelay | 0 | 0 | The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management … |
| 1.3.6.1.2.1.10.251.1.2.2.1.5 | xdsl2ChStatusActInp | 0 | 0 | Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0… |
| 1.3.6.1.2.1.10.251.1.2.2.1.6 | xdsl2ChStatusInpReport | 0 | 0 | Impulse noise protection reporting mode. |
| 1.3.6.1.2.1.10.251.1.2.2.1.7 | xdsl2ChStatusNFec | 0 | 0 | Actual size of Reed-Solomon codeword. This parameter reports the actual number of Reed-Solomon redundancy bytes per codeword used… |
| 1.3.6.1.2.1.10.251.1.2.2.1.8 | xdsl2ChStatusRFec | 0 | 0 | Actual number of Reed-Solomon redundancy bytes. This parameter reports the actual number of Reed-Solomon redundancy bytes per cod… |
| 1.3.6.1.2.1.10.251.1.2.2.1.9 | xdsl2ChStatusLSymb | 0 | 0 | Actual number of bits per symbol. This parameter reports the actual number of bits per symbol assigned to the latency path in whi… |
| 1.3.6.1.2.1.10.251.1.2.2.1.10 | xdsl2ChStatusIntlvDepth | 0 | 0 | Actual interleaving depth. This parameter reports the actual depth of the interleaver used in the latency path in which the beare… |
| 1.3.6.1.2.1.10.251.1.2.2.1.12 | xdsl2ChStatusLPath | 0 | 0 | Actual latency path. This parameter reports the index of the actual latency path in which the bearer is transported. The valid val… |
| 1.3.6.1.2.1.10.251.1.2.2.1.13 | xdsl2ChStatusAtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is ATM. This is a bitmap of possible condit… |
| 1.3.6.1.2.1.10.251.1.2.2.1.14 | xdsl2ChStatusPtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is PTM (Packet Transfer Mode). This is a bit… |