The status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated apsChanConfigEntry rows must represent
a set of consecutive channel numbers beginning with
0 or 1, depending on the selected architecture.
When set to notInService changes may be made to apsConfigMode,
apsConfigRevert, apsConfigDirection, apsConfigExtraTraffic,
apsConfigSdBerThreshold, apsConfigSfBerThreshold,
and apsConfigWaitToRestore. Also, associated apsChanConfigTable
objects may be added, deleted and modified.
Parsed from file APS-MIB.mib
Module: APS-MIB
Vendor: IETF RFCs
Module: APS-MIB (rfc3498-SONET-Linear-Automatic-Protection-Switching-APS.mib)
Type: TABULAR
Access: read-create
Syntax: RowStatus
Automatically extracted from www.mibdepot.com
apsConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Also, all associated apsChanConfigEntry rows must represent a set of consecutive channel numbers beginning with 0 or 1, depending on the selected architecture. When set to notInService changes may be made to apsConfigMode, apsConfigRevert, apsConfigDirection, apsConfigExtraTraffic, apsConfigSdBerThreshold, apsConfigSfBerThreshold, and apsConfigWaitToRestore. Also, associated apsChanConfigTable objects may be added, deleted and modified." ::= { apsConfigEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.49.1.1.2.1.1 | apsConfigName | 0 | 0 | A textual name for the APS group. |
| 1.3.6.1.2.1.10.49.1.1.2.1.3 | apsConfigMode | 0 | 0 | The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. one… |
| 1.3.6.1.2.1.10.49.1.1.2.1.4 | apsConfigRevert | 0 | 0 | The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received.… |
| 1.3.6.1.2.1.10.49.1.1.2.1.5 | apsConfigDirection | 0 | 0 | The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional T… |
| 1.3.6.1.2.1.10.49.1.1.2.1.6 | apsConfigExtraTraffic | 0 | 0 | This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must b… |
| 1.3.6.1.2.1.10.49.1.1.2.1.7 | apsConfigSdBerThreshold | 0 | 0 | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.2.1.10.49.1.1.2.1.8 | apsConfigSfBerThreshold | 0 | 0 | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.2.1.10.49.1.1.2.1.9 | apsConfigWaitToRestore | 0 | 0 | The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore p… |
| 1.3.6.1.2.1.10.49.1.1.2.1.10 | apsConfigCreationTime | 0 | 0 | The value of sysUpTime at the time the row was created |
| 1.3.6.1.2.1.10.49.1.1.2.1.11 | apsConfigStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |