The revertive mode of the APS group.
nonrevertive
Traffic remains on the protection line until another switch
request is received.
revertive
When the condition that caused a switch to the protection
line has been cleared the signal is switched back to the
working line. Since switching is revertive with the 1:n
architecture, apsConfigRevert must be set to revertive if
apsConfigMode is set to oneToN.
Switching may optionally be revertive with the 1+1 architecture.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).
Parsed from file APS-MIB.mib
Module: APS-MIB
Vendor: IETF RFCs
Module: APS-MIB (rfc3498-SONET-Linear-Automatic-Protection-Switching-APS.mib)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
apsConfigRevert OBJECT-TYPE SYNTAX INTEGER { nonrevertive(1), revertive(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received. revertive When the condition that caused a switch to the protection line has been cleared the signal is switched back to the working line. Since switching is revertive with the 1:n architecture, apsConfigRevert must be set to revertive if apsConfigMode is set to oneToN. Switching may optionally be revertive with the 1+1 architecture. This object may not be modified if the associated apsConfigRowStatus object is equal to active(1). " DEFVAL { nonrevertive } ::= { apsConfigEntry 4 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.49.1.1.2.1.1 | apsConfigName | 0 | 0 | A textual name for the APS group. |
| 1.3.6.1.2.1.10.49.1.1.2.1.2 | apsConfigRowStatus | 0 | 0 | The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriat… |
| 1.3.6.1.2.1.10.49.1.1.2.1.3 | apsConfigMode | 0 | 0 | The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. one… |
| 1.3.6.1.2.1.10.49.1.1.2.1.5 | apsConfigDirection | 0 | 0 | The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional T… |
| 1.3.6.1.2.1.10.49.1.1.2.1.6 | apsConfigExtraTraffic | 0 | 0 | This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must b… |
| 1.3.6.1.2.1.10.49.1.1.2.1.7 | apsConfigSdBerThreshold | 0 | 0 | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.2.1.10.49.1.1.2.1.8 | apsConfigSfBerThreshold | 0 | 0 | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold val… |
| 1.3.6.1.2.1.10.49.1.1.2.1.9 | apsConfigWaitToRestore | 0 | 0 | The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore p… |
| 1.3.6.1.2.1.10.49.1.1.2.1.10 | apsConfigCreationTime | 0 | 0 | The value of sysUpTime at the time the row was created |
| 1.3.6.1.2.1.10.49.1.1.2.1.11 | apsConfigStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |