Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.
Parsed from file ADSL-LINE-MIB.mib
Module: ADSL-LINE-MIB
Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.
SYNTAX INTEGER(0..16383)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0."
View at oid-info.com
Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.
Parsed from file adsl-line.mib.txt
Company: None
Module: ADSL-LINE-MIB
Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.
adslAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 23 }
adslAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 23 }
Defined in RFC2662
adslAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 23 }
adslAturConfMinUpshiftTime OBJECT-TYPE SYNTAX INTEGER(0..16383) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'." ::= { adslLineConfProfileEntry 23 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.94.1.1.14.1.1 | adslLineConfProfileName | 0 | 0 | This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are impleme… |
1.3.6.1.2.1.10.94.1.1.14.1.2 | adslAtucConfRateMode | 0 | 0 | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
1.3.6.1.2.1.10.94.1.1.14.1.3 | adslAtucConfRateChanRatio | 0 | 0 | Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mo… |
1.3.6.1.2.1.10.94.1.1.14.1.4 | adslAtucConfTargetSnrMgn | 0 | 0 | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successful… |
1.3.6.1.2.1.10.94.1.1.14.1.5 | adslAtucConfMaxSnrMgn | 0 | 0 | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power… |
1.3.6.1.2.1.10.94.1.1.14.1.6 | adslAtucConfMinSnrMgn | 0 | 0 | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increa… |
1.3.6.1.2.1.10.94.1.1.14.1.7 | adslAtucConfDownshiftSnrMgn | 0 | 0 | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrea… |
1.3.6.1.2.1.10.94.1.1.14.1.8 | adslAtucConfUpshiftSnrMgn | 0 | 0 | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase… |
1.3.6.1.2.1.10.94.1.1.14.1.9 | adslAtucConfMinUpshiftTime | 0 | 0 | Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the … |
1.3.6.1.2.1.10.94.1.1.14.1.10 | adslAtucConfMinDownshiftTime | 0 | 0 | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL is not present, t… |
1.3.6.1.2.1.10.94.1.1.14.1.11 | adslAtucChanConfFastMinTxRate | 0 | 0 | Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode… |
1.3.6.1.2.1.10.94.1.1.14.1.12 | adslAtucChanConfInterleaveMinTxRate | 0 | 0 | Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADS… |
1.3.6.1.2.1.10.94.1.1.14.1.13 | adslAtucChanConfFastMaxTxRate | 0 | 0 | Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode… |
1.3.6.1.2.1.10.94.1.1.14.1.14 | adslAtucChanConfInterleaveMaxTxRate | 0 | 0 | Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADS… |
1.3.6.1.2.1.10.94.1.1.14.1.15 | adslAtucChanConfMaxInterleaveDelay | 0 | 0 | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the map… |
1.3.6.1.2.1.10.94.1.1.14.1.16 | adslAturConfRateMode | 0 | 0 | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
1.3.6.1.2.1.10.94.1.1.14.1.17 | adslAturConfRateChanRatio | 0 | 0 | Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mo… |
1.3.6.1.2.1.10.94.1.1.14.1.18 | adslAturConfTargetSnrMgn | 0 | 0 | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successful… |
1.3.6.1.2.1.10.94.1.1.14.1.19 | adslAturConfMaxSnrMgn | 0 | 0 | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power… |
1.3.6.1.2.1.10.94.1.1.14.1.20 | adslAturConfMinSnrMgn | 0 | 0 | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increa… |
1.3.6.1.2.1.10.94.1.1.14.1.21 | adslAturConfDownshiftSnrMgn | 0 | 0 | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrea… |
1.3.6.1.2.1.10.94.1.1.14.1.22 | adslAturConfUpshiftSnrMgn | 0 | 0 | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase… |
1.3.6.1.2.1.10.94.1.1.14.1.24 | adslAturConfMinDownshiftTime | 0 | 0 | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL is not present, t… |
1.3.6.1.2.1.10.94.1.1.14.1.25 | adslAturChanConfFastMinTxRate | 0 | 0 | Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode… |
1.3.6.1.2.1.10.94.1.1.14.1.26 | adslAturChanConfInterleaveMinTxRate | 0 | 0 | Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADS… |
1.3.6.1.2.1.10.94.1.1.14.1.27 | adslAturChanConfFastMaxTxRate | 0 | 0 | Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode… |
1.3.6.1.2.1.10.94.1.1.14.1.28 | adslAturChanConfInterleaveMaxTxRate | 0 | 0 | Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADS… |
1.3.6.1.2.1.10.94.1.1.14.1.29 | adslAturChanConfMaxInterleaveDelay | 0 | 0 | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the map… |
1.3.6.1.2.1.10.94.1.1.14.1.30 | adslLineConfProfileRowStatus | 0 | 0 | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this ob… |