Vendor: NSC
Module: NSCHippiSonet-MIB
[Automatically extracted from oidview.com]
nscHippiSonetProfile OBJECT IDENTIFIER ::= { nscHippiSonet 6 }
nscHippiSonetProfile OBJECT IDENTIFIER ::= { nscHippiSonet 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.10.2.1.5.6.1 | nscHippiSonetOpticalRcvOffset | 1 | 1 | String representation of the floating value for the offset of the optical receive light formula. |
1.3.6.1.4.1.10.2.1.5.6.2 | nscHippiSonetOpticalRcvSlope | 1 | 1 | String representation of the floating value for the slope of the optical receive light formula. |
1.3.6.1.4.1.10.2.1.5.6.3 | nscHippiSonetBiasCurrent | 1 | 1 | Integer representation of the floating value for the baseline current of the transmit laser in milliamps. This value is used by … |
1.3.6.1.4.1.10.2.1.5.6.4 | nscHippiSonetBiasTemp | 1 | 1 | Temperature in celcius at which the profiled bias current was taken. This value is used with the bias current to determine the l… |
1.3.6.1.4.1.10.2.1.5.6.5 | nscHippiSonetBackfaceVoltage | 1 | 1 | String representation of the floting value of the Voltage in millivolts that was measured at the backface of the laser when it wa… |
1.3.6.1.4.1.10.2.1.5.6.6 | nscHippiSonetIField | 1 | 1 | The I-Field address that is used by the hippi interface. |
1.3.6.1.4.1.10.2.1.5.6.7 | nscHippiSonetBootPort | 1 | 1 | Which rs232 port the boot information should be sent to. Ports 1 & 2 are the only valid ports with 1 being located on the back o… |
1.3.6.1.4.1.10.2.1.5.6.8 | nscHippiSonetPortSpeed | 1 | 1 | The baud rate to set the rs232 ports to at boot time. |
1.3.6.1.4.1.10.2.1.5.6.9 | nscHippiSonetThreshold | 1 | 1 | Threshold of the mega-fifo at which flow control will be activated. The value represents 8ths of the fifo with 7 representing th… |
1.3.6.1.4.1.10.2.1.5.6.10 | nscHippiTimeout | 1 | 1 | Timeout value to use when trying to connect from our hippi source. This timer is started when the source raises connect. If the… |
1.3.6.1.4.1.10.2.1.5.6.11 | nscHippiSonetDipSwitch | 1 | 1 | This is a software switch that functions much like a hardware dip switch. At the moment, the only use of this switch is to defin… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.10.2.1.5.1 | nscHippiSonetEngineStatus | 1 | 1 | String describing the current state of the engine. |
1.3.6.1.4.1.10.2.1.5.2 | nscHippiSonetRegisters | 3 | 25 | None |
1.3.6.1.4.1.10.2.1.5.3 | nscHippiSonetMonitor | 26 | 52 | None |
1.3.6.1.4.1.10.2.1.5.4 | nscHippiSonetAtoD | 5 | 10 | None |
1.3.6.1.4.1.10.2.1.5.5 | nscHippiSonetSourceIField | 1 | 1 | Hippi source I-Field register. |