Timeout value to use when trying to connect from our
hippi source. This timer is started when the source
raises connect. If the destination fails to respond
before the timer goes off, the connect will be aborted.
The timer is represented as the number of 500 KHz
clock ticks.
Parsed from file h-sonet_mib.txt
Company: None
Module: NSCHippiSonet-MIB
Timeout value to use when trying to connect from our
hippi source. This timer is started when the source
raises connect. If the destination fails to respond
before the timer goes off, the connect will be aborted.
The timer is represented as the number of 500 KHz
clock ticks.
Parsed from file NSCHippiSonet-MIB.mib
Module: NSCHippiSonet-MIB
Vendor: NSC
Module: NSCHippiSonet-MIB
[Automatically extracted from oidview.com]
nscHippiTimeout OBJECT-TYPE SYNTAX INTEGER (1..'7fff'h) ACCESS read-write STATUS mandatory DESCRIPTION "Timeout value to use when trying to connect from our hippi source. This timer is started when the source raises connect. If the destination fails to respond before the timer goes off, the connect will be aborted. The timer is represented as the number of 500 KHz clock ticks." ::= { nscHippiSonetProfile 10 }
nscHippiTimeout OBJECT-TYPE SYNTAX INTEGER (1..'7fff'h) ACCESS read-write STATUS mandatory DESCRIPTION "Timeout value to use when trying to connect from our hippi source. This timer is started when the source raises connect. If the destination fails to respond before the timer goes off, the connect will be aborted. The timer is represented as the number of 500 KHz clock ticks." ::= { nscHippiSonetProfile 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10.2.1.5.6.10.0 | nscHippiTimeout | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10.2.1.5.6.1 | nscHippiSonetOpticalRcvOffset | 1 | 1 | String representation of the floating value for the offset of the optical receive light formula. |
| 1.3.6.1.4.1.10.2.1.5.6.2 | nscHippiSonetOpticalRcvSlope | 1 | 1 | String representation of the floating value for the slope of the optical receive light formula. |
| 1.3.6.1.4.1.10.2.1.5.6.3 | nscHippiSonetBiasCurrent | 1 | 1 | Integer representation of the floating value for the baseline current of the transmit laser in milliamps. This value is used by … |
| 1.3.6.1.4.1.10.2.1.5.6.4 | nscHippiSonetBiasTemp | 1 | 1 | Temperature in celcius at which the profiled bias current was taken. This value is used with the bias current to determine the l… |
| 1.3.6.1.4.1.10.2.1.5.6.5 | nscHippiSonetBackfaceVoltage | 1 | 1 | String representation of the floting value of the Voltage in millivolts that was measured at the backface of the laser when it wa… |
| 1.3.6.1.4.1.10.2.1.5.6.6 | nscHippiSonetIField | 1 | 1 | The I-Field address that is used by the hippi interface. |
| 1.3.6.1.4.1.10.2.1.5.6.7 | nscHippiSonetBootPort | 1 | 1 | Which rs232 port the boot information should be sent to. Ports 1 & 2 are the only valid ports with 1 being located on the back o… |
| 1.3.6.1.4.1.10.2.1.5.6.8 | nscHippiSonetPortSpeed | 1 | 1 | The baud rate to set the rs232 ports to at boot time. |
| 1.3.6.1.4.1.10.2.1.5.6.9 | nscHippiSonetThreshold | 1 | 1 | Threshold of the mega-fifo at which flow control will be activated. The value represents 8ths of the fifo with 7 representing th… |
| 1.3.6.1.4.1.10.2.1.5.6.11 | nscHippiSonetDipSwitch | 1 | 1 | This is a software switch that functions much like a hardware dip switch. At the moment, the only use of this switch is to defin… |