Note: Changed enumeration values in a non-backwards
manner in version 4.7. Handshake mechanism between host
and device to initiate and coordinate the download of
fax image data to be transmitted by the device fax
modem. This object serves both as an indicator of fax
download activity as well as a trigger for the host to
alter fax download progress. This object has been
redefined to track only the download acpect of the fax
transmission.
eFaxDownloadIdle - indicates no fax download activity
is occurring. Device powers up in this state but will
otherwise never transition to this state of its own
accord. Host setting to eFaxDownloadIdle while object
is in eFaxDownloadActive will cause download activity to
be prematurely terminated. Host setting to this state
resets the handshake mechanism to permit a another fax
download activity to be initiated.
eFaxDownloadStart - indicates the host requests to
commence a download session for sending a fax. This
state is host settable only from eFaxDownloadIdle.
Device will never transition to this state of its own
accord.
eFaxDownloadActive - indicates a fax download is
occurring. This state is not host settable. Device
will transition to this state from eFaxDownloadStart as
a positive response for host to commence download of fax
data. This state is not host settable. The object
FAXJOB-DOWNLOAD-ID now contains the job ID to be used to
track the progress of this fax job.
eFaxDownloadAborted - indicates the fax download
activity has been prematurely terminated by the device
due to some error. Object FAX-DOWNLOAD-ERROR contains
the error reason for the premature session termination.
This state is device settable from eFaxDownloadStart or
eFaxDownloadActive. This state is not host settable.
If modem transmission of fax data has started for this
download, the fax session will also be aborted.
eFaxDownloadDone - indicates the fax download activity
has reached a successful termination in that the device
has accepted all the download data from the host. This
state is only settable by the device from
eFaxDownloadActive. This state is not host settable.
This state does not indicate the progress of the modem
transmission of the downloaded fax data. Host should
transition from this state to eFaxDownloadIdle in order
to reset the handshake mechanism for subsequent
download.
Parsed from file lj3200_snmp.mib.txt
Company: hp
Module: LJ3200-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
fax-download OBJECT-TYPE SYNTAX INTEGER { eFaxDownloadIdle(1), eFaxDownloadStart(2), eFaxDownloadActive(3), eFaxDownloadAborted(4), eFaxDownloadDone(5) } ACCESS read-write STATUS optional DESCRIPTION "Note: Changed enumeration values in a non-backwards manner in version 4.7. Handshake mechanism between host and device to initiate and coordinate the download of fax image data to be transmitted by the device fax modem. This object serves both as an indicator of fax download activity as well as a trigger for the host to alter fax download progress. This object has been redefined to track only the download acpect of the fax transmission. eFaxDownloadIdle - indicates no fax download activity is occurring. Device powers up in this state but will otherwise never transition to this state of its own accord. Host setting to eFaxDownloadIdle while object is in eFaxDownloadActive will cause download activity to be prematurely terminated. Host setting to this state resets the handshake mechanism to permit a another fax download activity to be initiated. eFaxDownloadStart - indicates the host requests to commence a download session for sending a fax. This state is host settable only from eFaxDownloadIdle. Device will never transition to this state of its own accord. eFaxDownloadActive - indicates a fax download is occurring. This state is not host settable. Device will transition to this state from eFaxDownloadStart as a positive response for host to commence download of fax data. This state is not host settable. The object FAXJOB-DOWNLOAD-ID now contains the job ID to be used to track the progress of this fax job. eFaxDownloadAborted - indicates the fax download activity has been prematurely terminated by the device due to some error. Object FAX-DOWNLOAD-ERROR contains the error reason for the premature session termination. This state is device settable from eFaxDownloadStart or eFaxDownloadActive. This state is not host settable. If modem transmission of fax data has started for this download, the fax session will also be aborted. eFaxDownloadDone - indicates the fax download activity has reached a successful termination in that the device has accepted all the download data from the host. This state is only settable by the device from eFaxDownloadActive. This state is not host settable. This state does not indicate the progress of the modem transmission of the downloaded fax data. Host should transition from this state to eFaxDownloadIdle in order to reset the handshake mechanism for subsequent download." ::= { settings-fax-proc-sub 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.6.0 | fax-download | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.1 | fax-rxscale | 1 | 1 | Received faxes are to be printed at a reduced scale percentage. Value of 0 indicates auto-scaled printing based on the length of… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.3 | fax-noise-volume | 1 | 1 | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges correspon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.7 | fax-silent-detection | 1 | 1 | When enabled, this object causes the FAX machine to assume that the caller is a FAX even though the line has remained silent for … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.8 | fax-ring-enable | 1 | 1 | When the phone line rings, this object determines whether an audible ring shall be emitted. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.9 | fax-country | 1 | 1 | Note: Non-backwards compatible change make in version 4.7. Returns which country the telephone-electronics (LIU) is configured … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.10 | fax-tx-phone-number | 1 | 1 | Phone number about to be dialed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.14 | fax-redial-time | 1 | 1 | Number of seconds one must wait between the current redial (set by FAX-WHICH-REDIAL) and any prior dialing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.18 | fax-pstn-access-code | 1 | 1 | The code used within a PBX to get access to an outside PSTN line. Typically this is ''9''. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.19 | fax-rx-disposition | 1 | 1 | Indicates what is to be done with the incoming fax call. ePrintOnly - New fax arrivals only go to the printer. If printer becomes … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.21 | fax-error-correction-mode | 1 | 1 | Indicates whether the device is configured to send and receive faxes in error correction mode (ECM). This object controls both re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.22 | fax-report-transmission | 1 | 1 | Provides a host application with the ability to print a fax transmission report. The supported enumerations are: eNone - no trans… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.23 | fax-report-activity-log | 1 | 1 | Specifies when a report of fax transactions is to be printed. eNever - to never print a transaction report. eThreshold - to autom… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.24 | fax-dial-tone-detection | 1 | 1 | Determines whether the fax machine waits for a dial tone before dialing a fax number. eEnabled - causes the fax machine to wait u… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.25 | fax-alarm-volume | 1 | 1 | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges correspond… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.26 | fax-beep-volume | 1 | 1 | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges correspond… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.27 | fax-ring-volume | 1 | 1 | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges correspond… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.28 | fax-master-host | 1 | 1 | Identifies the hostname of the master host to which the device is connected. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.29 | fax-thumbnail-enable | 1 | 1 | Controls whether or not a thumbnail reprint of the first page of a fax shall be included on the fax call report. When set to eEn… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.30 | fax-phone-pickup-enable | 1 | 1 | This object is included to handle the situation where a fax machine and a telephone share the same phone line. If a call picked … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.31 | fax-adf-scan-count | 1 | 1 | This object tracks the page count for the pages scanned for faxing from the ADF. In order to write this object SERVICE-PASSWORD … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.32 | fax-print-page-count | 1 | 1 | This object tracks the page count for the pages sent to the print engine for fax jobs. In order to write this object SERVICE-PAS… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.33 | fax-download-page-count | 1 | 1 | This object tracks the page count for the pages downloaded to the peripheral for fax jobs. In order to write this object SERVICE… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.34 | fax-upload-page-count | 1 | 1 | This object tracks the page count for the pages uploaded from the peripheral for fax jobs. In order to write this object SERVICE… |