The number of IPX FTEthernet frames received.
Parsed from file jdMibCV5.mib.txt
Company: None
Module: JETDIRECT3-MIB
The number of IPX FTEthernet frames received.
Parsed from file JETDIRECT3-MIB.mib
Module: JETDIRECT3-MIB
Vendor: Hewlett-Packard
Module: JETDIRECT3-MIB
[Automatically extracted from oidview.com]
npIpxEthernetframetype OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPX FTEthernet frames received." ::={ npIpx 4 }
npIpxEthernetframetype OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The number of IPX FTEthernet frames received." ::={ npIpx 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.10.4.0 | npIpxEthernetframetype | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.10.1 | npIpxGetUnitCfgResp | 1 | 1 | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending o… |
1.3.6.1.4.1.11.2.4.3.10.2 | npIpx8022frametype | 1 | 1 | The number of IPX FT8022 frames received. |
1.3.6.1.4.1.11.2.4.3.10.3 | npIpxSNAPframetype | 1 | 1 | The number of IPX FTSNAP frames received. |
1.3.6.1.4.1.11.2.4.3.10.5 | npIpx8023Rawframetype | 1 | 1 | The number of IPX FT8023RAW frames received. |
1.3.6.1.4.1.11.2.4.3.10.6 | npIpxSapInfo | 1 | 1 | This is a 50 byte array that contains the following information. 2 bytes: bindery object type (always 030c in hi-lo order) 12 byt… |
1.3.6.1.4.1.11.2.4.3.10.7 | npIpxGetUnitCfgResp2 | 1 | 1 | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending o… |
1.3.6.1.4.1.11.2.4.3.10.8 | npIpxUnitName | 1 | 1 | This is the name by which the device advertises over NetWare. In remote printer mode, this is referred to as the node name. In… |
1.3.6.1.4.1.11.2.4.3.10.9 | npIpxNdsTreeName | 1 | 1 | This is the name of the NDS tree by which the JetDirect attempts to connect and authenticate. NDS support is enabled when this v… |
1.3.6.1.4.1.11.2.4.3.10.10 | npIpxNdsFullyQualifiedName | 3 | 9 | These objects contain the NDS fully qualified print server name. If the npIpxNdsTreeName object is unconfigured, then this value… |
1.3.6.1.4.1.11.2.4.3.10.11 | npIpxServerConnTable | 1 | 7 | A list of npIpxServerConn entries. |
1.3.6.1.4.1.11.2.4.3.10.12 | npIpxObsoleteServerConnInfo | 3 | 9 | These objects are obsolets, but are here for backwards compatility with pre-release software. |
1.3.6.1.4.1.11.2.4.3.10.13 | npIpxRcfgAddress | 1 | 1 | The 12 octet IPX address of the Novell RCFG socket. The address is in network byte order. |
1.3.6.1.4.1.11.2.4.3.10.14 | npIpxRcfgRemotePrintServerName | 1 | 1 | Remote print server name. |
1.3.6.1.4.1.11.2.4.3.10.15 | npIpxRcfgRemotePrinterNumber | 1 | 1 | remote Printer Number (valid in remote Printer Mode only) range: 0-255 for 4.X servers 0-15 for 3.X servers |
1.3.6.1.4.1.11.2.4.3.10.16 | npIpxRestart | 1 | 1 | Setting of this object to zero causes a soft reset of the board, setting to one causes a hard reset of the board. |
1.3.6.1.4.1.11.2.4.3.10.17 | npIpxSourceRoute | 1 | 1 | This object provides control/status for source route. Options for Token Ring networks are as follows: 00 - Auto Sensing mode 01 -… |
1.3.6.1.4.1.11.2.4.3.10.18 | npIpxFrameType | 1 | 1 | This object returns the frame type current enabled, possibilities are as follows: 00 - Auto 01 - Ethernet 8023 or Token-ring 02 - E… |
1.3.6.1.4.1.11.2.4.3.10.19 | npIpxJobPollInterval | 1 | 1 | Queue server job poll interval. |
1.3.6.1.4.1.11.2.4.3.10.20 | npIpxSapBroadcastInterval | 1 | 1 | Currently effective SAP broadcast Interval: range: 0-3600 seconds default: 60 seconds 0 value indicates SAP broadcasts are disable… |
1.3.6.1.4.1.11.2.4.3.10.21 | npIpxPjlEnableFlag | 1 | 1 | Currently effective PJL Enable Flag, possible values include: 00 - PJL disable 01 - PJL Job, banner 02 - Ustatus for end of job d… |
1.3.6.1.4.1.11.2.4.3.10.22 | npIpxTonerLowNotification | 1 | 1 | Current Configuration for toner low notification. Possible values include: 00 - notify only if intervention is required. 01 - Not… |
1.3.6.1.4.1.11.2.4.3.10.23 | npIpxNetNumber | 1 | 1 | Current Ipx network number. |