This object is the Get Unit Config Response
structure described in the IPX code. This
structure is of variable length depending
on how many servers are configured. This is
the second set of info when more than
8 print servers are configured.
Parsed from file jdMibCV5.mib.txt
Company: None
Module: JETDIRECT3-MIB
This object is the Get Unit Config Response
structure described in the IPX code. This
structure is of variable length depending
on how many servers are configured. This is
the second set of info when more than
8 print servers are configured.
Parsed from file JETDIRECT3-MIB.mib
Module: JETDIRECT3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
npIpxGetUnitCfgResp2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending on how many servers are configured. This is the second set of info when more than 8 print servers are configured." ::={ npIpx 7 }
npIpxGetUnitCfgResp2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending on how many servers are configured. This is the second set of info when more than 8 print servers are configured." ::={ npIpx 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.10.7.0 | npIpxGetUnitCfgResp2 | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.10.1 | npIpxGetUnitCfgResp | 1 | 1 | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending o… |
1.3.6.1.4.1.11.2.4.3.10.2 | npIpx8022frametype | 1 | 1 | The number of IPX FT8022 frames received. |
1.3.6.1.4.1.11.2.4.3.10.3 | npIpxSNAPframetype | 1 | 1 | The number of IPX FTSNAP frames received. |
1.3.6.1.4.1.11.2.4.3.10.4 | npIpxEthernetframetype | 1 | 1 | The number of IPX FTEthernet frames received. |
1.3.6.1.4.1.11.2.4.3.10.5 | npIpx8023Rawframetype | 1 | 1 | The number of IPX FT8023RAW frames received. |
1.3.6.1.4.1.11.2.4.3.10.6 | npIpxSapInfo | 1 | 1 | This is a 50 byte array that contains the following information. 2 bytes: bindery object type (always 030c in hi-lo order) 12 byt… |
1.3.6.1.4.1.11.2.4.3.10.8 | npIpxUnitName | 1 | 1 | This is the name by which the device advertises over NetWare. In remote printer mode, this is referred to as the node name. In… |
1.3.6.1.4.1.11.2.4.3.10.9 | npIpxNdsTreeName | 1 | 1 | This is the name of the NDS tree by which the JetDirect attempts to connect and authenticate. NDS support is enabled when this v… |
1.3.6.1.4.1.11.2.4.3.10.10 | npIpxNdsFullyQualifiedName | 3 | 9 | These objects contain the NDS fully qualified print server name. If the npIpxNdsTreeName object is unconfigured, then this value… |
1.3.6.1.4.1.11.2.4.3.10.11 | npIpxServerConnTable | 1 | 7 | A list of npIpxServerConn entries. |
1.3.6.1.4.1.11.2.4.3.10.12 | npIpxObsoleteServerConnInfo | 3 | 9 | These objects are obsolets, but are here for backwards compatility with pre-release software. |
1.3.6.1.4.1.11.2.4.3.10.13 | npIpxRcfgAddress | 1 | 1 | The 12 octet IPX address of the Novell RCFG socket. The address is in network byte order. |
1.3.6.1.4.1.11.2.4.3.10.14 | npIpxRcfgRemotePrintServerName | 1 | 1 | Remote print server name. |
1.3.6.1.4.1.11.2.4.3.10.15 | npIpxRcfgRemotePrinterNumber | 1 | 1 | remote Printer Number (valid in remote Printer Mode only) range: 0-255 for 4.X servers 0-15 for 3.X servers |
1.3.6.1.4.1.11.2.4.3.10.16 | npIpxRestart | 1 | 1 | Setting of this object to zero causes a soft reset of the board, setting to one causes a hard reset of the board. |
1.3.6.1.4.1.11.2.4.3.10.17 | npIpxSourceRoute | 1 | 1 | This object provides control/status for source route. Options for Token Ring networks are as follows: 00 - Auto Sensing mode 01 -… |
1.3.6.1.4.1.11.2.4.3.10.18 | npIpxFrameType | 1 | 1 | This object returns the frame type current enabled, possibilities are as follows: 00 - Auto 01 - Ethernet 8023 or Token-ring 02 - E… |
1.3.6.1.4.1.11.2.4.3.10.19 | npIpxJobPollInterval | 1 | 1 | Queue server job poll interval. |
1.3.6.1.4.1.11.2.4.3.10.20 | npIpxSapBroadcastInterval | 1 | 1 | Currently effective SAP broadcast Interval: range: 0-3600 seconds default: 60 seconds 0 value indicates SAP broadcasts are disable… |
1.3.6.1.4.1.11.2.4.3.10.21 | npIpxPjlEnableFlag | 1 | 1 | Currently effective PJL Enable Flag, possible values include: 00 - PJL disable 01 - PJL Job, banner 02 - Ustatus for end of job d… |
1.3.6.1.4.1.11.2.4.3.10.22 | npIpxTonerLowNotification | 1 | 1 | Current Configuration for toner low notification. Possible values include: 00 - notify only if intervention is required. 01 - Not… |
1.3.6.1.4.1.11.2.4.3.10.23 | npIpxNetNumber | 1 | 1 | Current Ipx network number. |