This is the name of the NDS tree by which the JetDirect attempts
to connect and authenticate. NDS support is enabled when this
value is provided (although connections do not become initiated
until ipxUnitName is reset).
To deconfigure the NDS support it is necessary to remove this tree
name by setting the value to a zero length octet string or setting
it to a single null character.
Parsed from file jdMibCV5.mib.txt
Company: None
Module: JETDIRECT3-MIB
This is the name of the NDS tree by which the JetDirect attempts
to connect and authenticate. NDS support is enabled when this
value is provided (although connections do not become initiated
until ipxUnitName is reset).
To deconfigure the NDS support it is necessary to remove this tree
name by setting the value to a zero length octet string or setting
it to a single null character.
Parsed from file JETDIRECT3-MIB.mib
Module: JETDIRECT3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
npIpxNdsTreeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the name of the NDS tree by which the JetDirect attempts to connect and authenticate. NDS support is enabled when this value is provided (although connections do not become initiated until ipxUnitName is reset). To deconfigure the NDS support it is necessary to remove this tree name by setting the value to a zero length octet string or setting it to a single null character." ::={ npIpx 9 }
npIpxNdsTreeName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS optional DESCRIPTION "This is the name of the NDS tree by which the JetDirect attempts to connect and authenticate. NDS support is enabled when this value is provided (although connections do not become initiated until ipxUnitName is reset). To deconfigure the NDS support it is necessary to remove this tree name by setting the value to a zero length octet string or setting it to a single null character." ::={ npIpx 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.4.3.10.9.0 | npIpxNdsTreeName | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.4.3.10.1 | npIpxGetUnitCfgResp | 1 | 1 | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending o… |
| 1.3.6.1.4.1.11.2.4.3.10.2 | npIpx8022frametype | 1 | 1 | The number of IPX FT8022 frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.3 | npIpxSNAPframetype | 1 | 1 | The number of IPX FTSNAP frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.4 | npIpxEthernetframetype | 1 | 1 | The number of IPX FTEthernet frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.5 | npIpx8023Rawframetype | 1 | 1 | The number of IPX FT8023RAW frames received. |
| 1.3.6.1.4.1.11.2.4.3.10.6 | npIpxSapInfo | 1 | 1 | This is a 50 byte array that contains the following information. 2 bytes: bindery object type (always 030c in hi-lo order) 12 byt… |
| 1.3.6.1.4.1.11.2.4.3.10.7 | npIpxGetUnitCfgResp2 | 1 | 1 | This object is the Get Unit Config Response structure described in the IPX code. This structure is of variable length depending o… |
| 1.3.6.1.4.1.11.2.4.3.10.8 | npIpxUnitName | 1 | 1 | This is the name by which the device advertises over NetWare. In remote printer mode, this is referred to as the node name. In… |
| 1.3.6.1.4.1.11.2.4.3.10.10 | npIpxNdsFullyQualifiedName | 3 | 9 | These objects contain the NDS fully qualified print server name. If the npIpxNdsTreeName object is unconfigured, then this value… |
| 1.3.6.1.4.1.11.2.4.3.10.11 | npIpxServerConnTable | 1 | 7 | A list of npIpxServerConn entries. |
| 1.3.6.1.4.1.11.2.4.3.10.12 | npIpxObsoleteServerConnInfo | 3 | 9 | These objects are obsolets, but are here for backwards compatility with pre-release software. |
| 1.3.6.1.4.1.11.2.4.3.10.13 | npIpxRcfgAddress | 1 | 1 | The 12 octet IPX address of the Novell RCFG socket. The address is in network byte order. |
| 1.3.6.1.4.1.11.2.4.3.10.14 | npIpxRcfgRemotePrintServerName | 1 | 1 | Remote print server name. |
| 1.3.6.1.4.1.11.2.4.3.10.15 | npIpxRcfgRemotePrinterNumber | 1 | 1 | remote Printer Number (valid in remote Printer Mode only) range: 0-255 for 4.X servers 0-15 for 3.X servers |
| 1.3.6.1.4.1.11.2.4.3.10.16 | npIpxRestart | 1 | 1 | Setting of this object to zero causes a soft reset of the board, setting to one causes a hard reset of the board. |
| 1.3.6.1.4.1.11.2.4.3.10.17 | npIpxSourceRoute | 1 | 1 | This object provides control/status for source route. Options for Token Ring networks are as follows: 00 - Auto Sensing mode 01 -… |
| 1.3.6.1.4.1.11.2.4.3.10.18 | npIpxFrameType | 1 | 1 | This object returns the frame type current enabled, possibilities are as follows: 00 - Auto 01 - Ethernet 8023 or Token-ring 02 - E… |
| 1.3.6.1.4.1.11.2.4.3.10.19 | npIpxJobPollInterval | 1 | 1 | Queue server job poll interval. |
| 1.3.6.1.4.1.11.2.4.3.10.20 | npIpxSapBroadcastInterval | 1 | 1 | Currently effective SAP broadcast Interval: range: 0-3600 seconds default: 60 seconds 0 value indicates SAP broadcasts are disable… |
| 1.3.6.1.4.1.11.2.4.3.10.21 | npIpxPjlEnableFlag | 1 | 1 | Currently effective PJL Enable Flag, possible values include: 00 - PJL disable 01 - PJL Job, banner 02 - Ustatus for end of job d… |
| 1.3.6.1.4.1.11.2.4.3.10.22 | npIpxTonerLowNotification | 1 | 1 | Current Configuration for toner low notification. Possible values include: 00 - notify only if intervention is required. 01 - Not… |
| 1.3.6.1.4.1.11.2.4.3.10.23 | npIpxNetNumber | 1 | 1 | Current Ipx network number. |