This module contains definitions for performance monitoring of the
ATM layer and it's circuits.
This MIB module contains the following tables:
ATM VPL 15 Minute Current Table
ATM VPL 15 Minute Interval Table
ATM VPL 1 Hour Current Table
ATM VPL 1 Hour Interval Table
ATM VPL Stat Table
ATM VPL Stat Counter Table
ATM VCL 15 Minute Current Table
ATM VCL 15 Minute Interval Table
ATM VCL 1 Hour Current Table
ATM VCL 1 Hour Interval Table
ATM VCL Stat Table
ATM VCL Stat Counter Table
nncDepthOfHistoricalStrata
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695, and by the statistic table definitions described
for Sonet in rfc1595. The number of intervals supported is dependent
upon resource availibility on any given product, but should nominally
be 32. To avoid building in massive amounts of storage, some products
may adopt a bulk collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability.
The intervals can be either 15 minutes or 1 hour and are aligned to
the quarter or one hour, respectively, of a wall clock. The current
interval spans back to the last 15 minute or 1 hour tick on the wall
clock. Continuing along the timeline from that point is the most
recently completed interval and has an index of 1. The previous
interval has an index of 2 and so on. Note that the oldest interval
may be incomplete since the statistic collection may have been
enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Counters:
The following is understood for each counter in this MIB:
- OAM cells are included in counts
- idle and unassigned cells are not counted
- valid cells are those that have passed HEC and have assigned VPI/VCI
- admitted cells have a connection
This module also contains definitions for performance monitoring of
Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic
Aggregation - and implemented as Shaped Trunk Group.
Only egress VPA statistics are provided.
The following tables have been added :
ATM VPA Short (15 minutes) Current Table
ATM VPA Short (15 Minutes) Interval Table
ATM VPA Long (1 Hour) Current Table
ATM VPA Long (1 Hour) Interval Table
Intervals:
two 15-minute intervals are provided : current and previous
two 1-hour intervals are provided : current and previous.
Parsed from file ATMStatistics.mib.txt
Company: None
Module: NNC-ATM-STATISTICS-MIB
This module contains definitions for performance monitoring of the
ATM layer and it's circuits.
This MIB module contains the following tables:
ATM VPL 15 Minute Current Table
ATM VPL 15 Minute Interval Table
ATM VPL 1 Hour Current Table
ATM VPL 1 Hour Interval Table
ATM VPL Stat Table
ATM VPL Stat Counter Table
ATM VCL 15 Minute Current Table
ATM VCL 15 Minute Interval Table
ATM VCL 1 Hour Current Table
ATM VCL 1 Hour Interval Table
ATM VCL Stat Table
ATM VCL Stat Counter Table
nncDepthOfHistoricalStrata
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695, and by the statistic table definitions described
for Sonet in rfc1595. The number of intervals supported is dependent
upon resource availibility on any given product, but should nominally
be 32. To avoid building in massive amounts of storage, some products
may adopt a bulk collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability.
The intervals can be either 15 minutes or 1 hour and are aligned to
the quarter or one hour, respectively, of a wall clock. The current
interval spans back to the last 15 minute or 1 hour tick on the wall
clock. Continuing along the timeline from that point is the most
recently completed interval and has an index of 1. The previous
interval has an index of 2 and so on. Note that the oldest interval
may be incomplete since the statistic collection may have been
enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Counters:
The following is understood for each counter in this MIB:
- OAM cells are included in counts
- idle and unassigned cells are not counted
- valid cells are those that have passed HEC and have assigned VPI/VCI
- admitted cells have a connection
This module also contains definitions for performance monitoring of
Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic
Aggregation - and implemented as Shaped Trunk Group.
Only egress VPA statistics are provided.
The following tables have been added :
ATM VPA Short (15 minutes) Current Table
ATM VPA Short (15 Minutes) Interval Table
ATM VPA Long (1 Hour) Current Table
ATM VPA Long (1 Hour) Interval Table
Intervals:
two 15-minute intervals are provided : current and previous
two 1-hour intervals are provided : current and previous.
Parsed from file NNCGNI0001-SMI.mib
Module: NNCGNI0001-SMI
Vendor: Newbridge Networks Corporation
Module: NNC-ATM-STATISTICS-MIB
[Automatically extracted from oidview.com]
nncAtmStatistics MODULE-IDENTITY LAST-UPDATED "9807210330Z" ORGANIZATION "Newbridge Networks Corporation" CONTACT-INFO "Newbridge Networks Corporation Postal: 600 March Road Kanata, Ontario Canada K2K 2E6 Phone: +1 613 591 3600 Fax: +1 613 591 3680" DESCRIPTION " This module contains definitions for performance monitoring of the ATM layer and it's circuits. This MIB module contains the following tables: ATM VPL 15 Minute Current Table ATM VPL 15 Minute Interval Table ATM VPL 1 Hour Current Table ATM VPL 1 Hour Interval Table ATM VPL Stat Table ATM VPL Stat Counter Table ATM VCL 15 Minute Current Table ATM VCL 15 Minute Interval Table ATM VCL 1 Hour Current Table ATM VCL 1 Hour Interval Table ATM VCL Stat Table ATM VCL Stat Counter Table nncDepthOfHistoricalStrata These tables are heavily influenced by the definition of VPL/VCL described in rfc1695, and by the statistic table definitions described for Sonet in rfc1595. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme. Intervals: Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. The intervals can be either 15 minutes or 1 hour and are aligned to the quarter or one hour, respectively, of a wall clock. The current interval spans back to the last 15 minute or 1 hour tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick. t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval Counters: The following is understood for each counter in this MIB: - OAM cells are included in counts - idle and unassigned cells are not counted - valid cells are those that have passed HEC and have assigned VPI/VCI - admitted cells have a connection This module also contains definitions for performance monitoring of Virtual Path Aggregation (VPA) - also known as VCC to VPC Traffic Aggregation - and implemented as Shaped Trunk Group. Only egress VPA statistics are provided. The following tables have been added : ATM VPA Short (15 minutes) Current Table ATM VPA Short (15 Minutes) Interval Table ATM VPA Long (1 Hour) Current Table ATM VPA Long (1 Hour) Interval Table Intervals: two 15-minute intervals are provided : current and previous two 1-hour intervals are provided : current and previous. " ::= { nncExtensions 29 }
nncAtmStatistics OBJECT IDENTIFIER ::= { nncExtensions 29 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.29.1 | nncAtmStatisticsObjects | 18 | 154 | None |
1.3.6.1.4.1.123.3.29.2 | nncAtmStatisticsTraps | 0 | 0 | None |
1.3.6.1.4.1.123.3.29.3 | nncAtmStatisticsGroups | 19 | 19 | None |
1.3.6.1.4.1.123.3.29.4 | nncAtmStatisticsCompliances | 2 | 2 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.1 | nncExtSystem | 6 | 16 | None |
1.3.6.1.4.1.123.3.2 | nncExtEnvironmental | 6 | 16 | None |
1.3.6.1.4.1.123.3.3 | nncExtRestart | 9 | 22 | None |
1.3.6.1.4.1.123.3.4 | nncExtCodeSpace | 4 | 19 | None |
1.3.6.1.4.1.123.3.5 | nncExtNVM | 2 | 7 | None |
1.3.6.1.4.1.123.3.6 | nncExtAlarm | 6 | 30 | None |
1.3.6.1.4.1.123.3.7 | nncExtNetSynch | 3 | 14 | None |
1.3.6.1.4.1.123.3.8 | nncExtPosition | 4 | 22 | None |
1.3.6.1.4.1.123.3.9 | nncExtDevice | 1 | 15 | None |
1.3.6.1.4.1.123.3.10 | nncExtDs1 | 8 | 72 | None |
1.3.6.1.4.1.123.3.11 | nncExtRptr | 2 | 18 | None |
1.3.6.1.4.1.123.3.12 | nncExtProbe | 1 | 3 | None |
1.3.6.1.4.1.123.3.13 | nncExtDiag | 2 | 4 | None |
1.3.6.1.4.1.123.3.14 | nncExtSyncDataCct | 2 | 14 | None |
1.3.6.1.4.1.123.3.30 | nncFrIntStatistics | 4 | 258 | This module contains definitions for performance monitoring of Frame Relay Streams |
1.3.6.1.4.1.123.3.31 | nncExtIntvlStats | 0 | 0 | The MIB module containing type definitions common to interval statistics collection mibs. |
1.3.6.1.4.1.123.3.32 | nncExtSVCSigStats | 4 | 177 | The MIB module containing management information for performance monitoring of SVC Signalling functions. |
1.3.6.1.4.1.123.3.40 | nncExtE3 | 4 | 43 | This module contains definitions for Newbridge extensions to E3 objects. It is used as a supplement to rfc1407. |
1.3.6.1.4.1.123.3.43 | nncExtMultiBridge | 5 | 85 | Newbridge's multi-BRIDGE MIB Module. for nodes which implements more than one bridge entity. |
1.3.6.1.4.1.123.3.44 | nncExtNotif | 4 | 85 | This MIB module contains information regarding Alarm and Trouble Ticket information forwarding as Notifications. |
1.3.6.1.4.1.123.3.47 | nncCEFillLevelStatistics | 3 | 9 | This module contains definitions for monitoring aal1 fill level statistics. |
1.3.6.1.4.1.123.3.49 | nncExtServiceNotif | 4 | 61 | This MIB module contains information regarding Service status information forwarded as Notifications. |
1.3.6.1.4.1.123.3.50 | nncExtPktStatistics | 4 | 59 | This module contains definitions for performance monitoring of the packets routed. This MIB module contains the following tables:… |
1.3.6.1.4.1.123.3.54 | nncAtmProtoStatistics | 3 | 38 | This module contains definitions for performance monitoring of the ATM cell layers. This MIB module contains the following tables… |
1.3.6.1.4.1.123.3.63 | nncAtmCongestionStatistics | 3 | 96 | This module contains the definitions for congestion statistics on ATM products. Congestion statistics allow the user to monitor… |
1.3.6.1.4.1.123.3.64 | nncSdslStatistics | 1 | 60 | This module contains definitions for SDSL Ports Stats. |
1.3.6.1.4.1.123.3.65 | nncExtPmStatistics | 4 | 89 | This module contains the definitions for statistics collected for OAM Performance Monitoring. The definition and requirement fo… |
1.3.6.1.4.1.123.3.69 | nncExtNEInventory | 3 | 22 | This module contains definition for monitoring the inventory of network elements in a network. The module can be used to query t… |
1.3.6.1.4.1.123.3.70 | nncBellcoreGR820Ds1Statistics | 3 | 47 | This module contains the definitions for the Bellcore GR820 statistics for DS1 lines. |
1.3.6.1.4.1.123.3.71 | nncAAL5 | 4 | 17 | This module contains definitions for monitoring and configuring AAL5 information on Newbridge ATM cards. |
1.3.6.1.4.1.123.3.72 | nncVS | 4 | 29 | This module contains definitions for monitoring and configuring Newbridge Voiceband Services cards. |
1.3.6.1.4.1.123.3.78 | nncExtRoutingStats | 3 | 467 | This MIB module contains management information for performance monitoring of call routing statistics. Seven types of statistics … |
1.3.6.1.4.1.123.3.79 | nncExtPvc | 3 | 84 | This module contains Alcatel's proprietary MIB definition for managing point-to-point and point-to-multipoint Permanent Virtual C… |
1.3.6.1.4.1.123.3.80 | nncExtVpttp | 3 | 8 | This module contains Alcatel's proprietary MIB definition for configuration of VP Trail Termination Points. This support is is pr… |
1.3.6.1.4.1.123.3.82 | nncExtSpvc | 3 | 213 | This module contains Alcatel CID's proprietary MIB definition for managing Soft Permanent Virtual Connections (SPVCs). This MIB s… |