This object contains the VPI value for the
destination endpoint.
Parsed from file NncExtPVC.mib.txt
Company: None
Module: NNCEXTPVC-MIB
This object contains the VPI value for the
destination endpoint.
Parsed from file NNCEXTPVC-MIB.mib
Module: NNCEXTPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTPVC-MIB
[Automatically extracted from oidview.com]
nncCrPvccDstVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the VPI value for the destination endpoint." ::= { nncCrPvccTableEntry 5 }
nncCrPvccDstVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the VPI value for the destination endpoint." ::= { nncCrPvccTableEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.79.1.2.1.1 | nncCrPvccSrcIfIndex | 0 | 0 | This object contains the ifIndex value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.2 | nncCrPvccSrcVpi | 0 | 0 | This object contains the VPI value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.3 | nncCrPvccSrcVci | 0 | 0 | This object contains the VCI value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.4 | nncCrPvccDstIfIndex | 0 | 0 | This object contains the ifIndex value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.6 | nncCrPvccDstVci | 0 | 0 | This object contains the VCI value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.7 | nncCrPvccCastType | 0 | 0 | This object is used to indicate whether the PVCC is point-to-point or point-to-multipoint |
1.3.6.1.4.1.123.3.79.1.2.1.8 | nncCrPvccFwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from source endpoint to destination endpoint. This object is dependent on… |
1.3.6.1.4.1.123.3.79.1.2.1.9 | nncCrPvccBwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from destination end point to source endpoint. This object is dependent o… |
1.3.6.1.4.1.123.3.79.1.2.1.10 | nncCrPvccFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.2.1.11 | nncCrPvccFwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.12 | nncCrPvccFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.13 | nncCrPvccBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.2.1.14 | nncCrPvccBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the destination endpoint. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.15 | nncCrPvccBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the destination endpoint. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.16 | nncCrPvccSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.17 | nncCrPvccDstBillingFlag | 0 | 0 | Billing Configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.18 | nncCrPvccFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the PVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.2.1.19 | nncCrPvccFwdTmPolicingOption | 0 | 0 | Policing Option for a PVcC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descrip… |
1.3.6.1.4.1.123.3.79.1.2.1.20 | nncCrPvccFwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.2.1.21 | nncCrPvccFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.2.1.22 | nncCrPvccFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.2.1.23 | nncCrPvccFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.2.1.24 | nncCrPvccFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
1.3.6.1.4.1.123.3.79.1.2.1.25 | nncCrPvccFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.2.1.26 | nncCrPvccFwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
1.3.6.1.4.1.123.3.79.1.2.1.27 | nncCrPvccBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.2.1.28 | nncCrPvccBwdTmPolicingOption | 0 | 0 | Policing Option for an PVCC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descri… |
1.3.6.1.4.1.123.3.79.1.2.1.29 | nncCrPvccBwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.2.1.30 | nncCrPvccBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.2.1.31 | nncCrPvccBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.2.1.32 | nncCrPvccBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.2.1.33 | nncCrPvccBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
1.3.6.1.4.1.123.3.79.1.2.1.34 | nncCrPvccBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.2.1.35 | nncCrPvccBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
1.3.6.1.4.1.123.3.79.1.2.1.36 | nncCrPvccSrcAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.37 | nncCrPvccDstAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.38 | nncCrPvccCreator | 0 | 0 | The object retrieves the creator of a PVC connection. |
1.3.6.1.4.1.123.3.79.1.2.1.39 | nncCrPvccRowStatus | 0 | 0 | This object is to control a row creation of a CR PVCC. When RowStatus is createAndWait, information for a row is cached in memor… |