The object retrieves the creator of a given SPVC connection.
Parsed from file NncExtSPVC.mib.txt
Company: None
Module: NNCEXTSPVC-MIB
The object retrieves the creator of a given SPVC connection.
Parsed from file NNCEXTSPVC-MIB.mib
Module: NNCEXTSPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTSPVC-MIB
[Automatically extracted from oidview.com]
nncFrSpvcCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), nmti(1), nm5620(2), snmp(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a given SPVC connection." ::= { nncFrSpvcTableEntry 48 }
nncFrSpvcCreator OBJECT-TYPE SYNTAX INTEGER { unknown(0), nmti(1), nm5620(2), snmp(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object retrieves the creator of a given SPVC connection." ::= { nncFrSpvcTableEntry 48 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.82.1.5.1.1 | nncFrSpvcSrcDlci | 0 | 0 | This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the source… |
| 1.3.6.1.4.1.123.3.82.1.5.1.2 | nncFrSpvcTargEpAddr | 0 | 0 | This object contains the target endpoint's 20-byte ATM End System Address (AESA) proposed by ATM Forum. An endpoint address is c… |
| 1.3.6.1.4.1.123.3.82.1.5.1.3 | nncFrSpvcTargDlci | 0 | 0 | This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the target… |
| 1.3.6.1.4.1.123.3.82.1.5.1.4 | nncFrSpvcTargVpi | 0 | 0 | This object contains the virtual path identifier (VPI) value for the Cell Relay based target endpoint. Range: 0 - 4095 |
| 1.3.6.1.4.1.123.3.82.1.5.1.5 | nncFrSpvcTargVci | 0 | 0 | This object contains the virtual channel identifier (VCI) value for the cell-relay based target endpoint. Range: 1 - 65535 |
| 1.3.6.1.4.1.123.3.82.1.5.1.6 | nncFrSpvcTargEpType | 0 | 0 | This object specifies a target endpoint as one of the following types: cellRelay (1) frameRelay (2) |
| 1.3.6.1.4.1.123.3.82.1.5.1.7 | nncFrSpvcAdminStatus | 0 | 0 | This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabl… |
| 1.3.6.1.4.1.123.3.82.1.5.1.8 | nncFrSpvcPriority | 0 | 0 | This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Pr… |
| 1.3.6.1.4.1.123.3.82.1.5.1.9 | nncFrSpvcMaxAdminWeight | 0 | 0 | This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for … |
| 1.3.6.1.4.1.123.3.82.1.5.1.10 | nncFrSpvcOperation | 0 | 0 | This object is used to request a reroute operation. Querying this object will not provide any useful information. |
| 1.3.6.1.4.1.123.3.82.1.5.1.11 | nncFrSpvcCallStatus | 0 | 0 | This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a va… |
| 1.3.6.1.4.1.123.3.82.1.5.1.12 | nncFrSpvcLocRerouteConfig | 0 | 0 | This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for eithe… |
| 1.3.6.1.4.1.123.3.82.1.5.1.13 | nncFrSpvcSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
| 1.3.6.1.4.1.123.3.82.1.5.1.14 | nncFrSpvcFrPriority | 0 | 0 | Frame Relay Priority. |
| 1.3.6.1.4.1.123.3.82.1.5.1.15 | nncFrSpvcFrVsvdCongestionControl | 0 | 0 | Congestion Control for VS/VD endpoints, also known as Closed Loop Congestion Control (CLCC). |
| 1.3.6.1.4.1.123.3.82.1.5.1.16 | nncFrSpvcFwdFrMir | 0 | 0 | The FR Src->Dst Minimum Information Rate, used to set the minimum rate on a CLCC FR-FR SPVC connection. If nncFrSpvcFrVsvdCongesti… |
| 1.3.6.1.4.1.123.3.82.1.5.1.17 | nncFrSpvcFwdTmAr | 0 | 0 | This object is used to specify the Access Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.18 | nncFrSpvcFwdTmCir | 0 | 0 | The committed Information Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.19 | nncFrSpvcFwdTmBc | 0 | 0 | The Committed Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.20 | nncFrSpvcFwdTmBe | 0 | 0 | Excess Burst Size, Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.21 | nncFrSpvcTmIwf | 0 | 0 | Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2)… |
| 1.3.6.1.4.1.123.3.82.1.5.1.22 | nncFrSpvcFwdTmPo | 0 | 0 | Policing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.23 | nncFrSpvcFwdTmPacing | 0 | 0 | Pacing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.24 | nncFrSpvcTmPtclMapping | 0 | 0 | Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using … |
| 1.3.6.1.4.1.123.3.82.1.5.1.25 | nncFrSpvcTmClpMapping | 0 | 0 | Cell Loss Priority Mapping, for use in FR-CR interworking SPVCs. Values: cLPEqualsDE (CLP = DE, 0) cLPEquals0 (CLP = 0, 1 ) cLPEqu… |
| 1.3.6.1.4.1.123.3.82.1.5.1.26 | nncFrSpvcTmDeMapping | 0 | 0 | Discard Eligibility Mapping, for use in FR-CR interworking SPVCs. Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interwo… |
| 1.3.6.1.4.1.123.3.82.1.5.1.27 | nncFrSpvcTmEfciMapping | 0 | 0 | Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (EF… |
| 1.3.6.1.4.1.123.3.82.1.5.1.28 | nncFrSpvcTmPvcMgntProfile | 0 | 0 | Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with… |
| 1.3.6.1.4.1.123.3.82.1.5.1.29 | nncFrSpvcTmSIWProfile | 0 | 0 | The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use whe… |
| 1.3.6.1.4.1.123.3.82.1.5.1.30 | nncFrSpvcTmRemapDlci | 0 | 0 | The source end-point Data Link Connection Identifier for many-to-one Network Interworking (IWF2) connections. |
| 1.3.6.1.4.1.123.3.82.1.5.1.31 | nncFrSpvcBwdFrMir | 0 | 0 | The FR Dst->Src Minimum Information Rate, used on CLCC-enabled connections. Range: 0 - 44210 Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.32 | nncFrSpvcBwdTmAr | 0 | 0 | This object is used to specify the Access Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.33 | nncFrSpvcBwdTmCir | 0 | 0 | The committed Information Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.34 | nncFrSpvcBwdTmBc | 0 | 0 | The Committed Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.35 | nncFrSpvcBwdTmBe | 0 | 0 | The Excess Burst Size, Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.36 | nncFrSpvcBwdTmPo | 0 | 0 | Policing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.37 | nncFrSpvcBwdTmPacing | 0 | 0 | Pacing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.38 | nncFrSpvcCrTmServiceCategory | 0 | 0 | This object is used to set the traffic service category for SPVC Connections. This object is dependent on the value specified i… |
| 1.3.6.1.4.1.123.3.82.1.5.1.39 | nncFrSpvcCrBwdTmTrafficDescriptor | 0 | 0 | This object contains the CR traffic descriptor for a FR-CR SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1/S_0+1 … |
| 1.3.6.1.4.1.123.3.82.1.5.1.40 | nncFrSpvcCrBwdTmPolicingOption | 0 | 0 | Policing Option for a FR SPVC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
| 1.3.6.1.4.1.123.3.82.1.5.1.41 | nncFrSpvcCrBwdTmBucketOneRate | 0 | 0 | Used in FR - CR interworking. This object is for peak cell rate (PCR), the cell rate which the cell endpoint may never exceed. I… |
| 1.3.6.1.4.1.123.3.82.1.5.1.42 | nncFrSpvcCrBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for the CR endpoint, measured in microseconds. Range: 1 - 190,00… |
| 1.3.6.1.4.1.123.3.82.1.5.1.43 | nncFrSpvcCrBwdTmBucketTwoRate | 0 | 0 | Used in FR - CR interworking. The attribute contains the SIR_0, SIR_0+1 or MIR_0+1. This parameter holds the sustained informatio… |
| 1.3.6.1.4.1.123.3.82.1.5.1.44 | nncFrSpvcCrBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.82.1.5.1.45 | nncFrSpvcCrBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) at the CR endpoint. Applicable only when the rt-VBR service category is use… |
| 1.3.6.1.4.1.123.3.82.1.5.1.46 | nncFrSpvcCrBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) at the CR endpoint of a FR-CR SPVC. Valid only when using the nrt-VBR service ca… |
| 1.3.6.1.4.1.123.3.82.1.5.1.47 | nncFrSpvcCrBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.82.1.5.1.49 | nncFrSpvcRowStatus | 0 | 0 | This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWa… |