This object accepts two values, enabled (1), and disabled (2).
When the value is disabled, the SPVC is not connected. When
enabled, the SPVC is connected when possible.
Use nncFrSpvcAdminStatus to determine if the connection is
successful.
Parsed from file NncExtSPVC.mib.txt
Company: None
Module: NNCEXTSPVC-MIB
This object accepts two values, enabled (1), and disabled (2).
When the value is disabled, the SPVC is not connected. When
enabled, the SPVC is connected when possible.
Use nncFrSpvcAdminStatus to determine if the connection is
successful.
Parsed from file NNCEXTSPVC-MIB.mib
Module: NNCEXTSPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTSPVC-MIB
[Automatically extracted from oidview.com]
nncFrSpvcAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncFrSpvcAdminStatus to determine if the connection is successful." ::= { nncFrSpvcTableEntry 7 }
nncFrSpvcAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabled, the SPVC is connected when possible. Use nncFrSpvcAdminStatus to determine if the connection is successful." ::= { nncFrSpvcTableEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.82.1.5.1.1 | nncFrSpvcSrcDlci | 0 | 0 | This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the source… |
| 1.3.6.1.4.1.123.3.82.1.5.1.2 | nncFrSpvcTargEpAddr | 0 | 0 | This object contains the target endpoint's 20-byte ATM End System Address (AESA) proposed by ATM Forum. An endpoint address is c… |
| 1.3.6.1.4.1.123.3.82.1.5.1.3 | nncFrSpvcTargDlci | 0 | 0 | This object contains the data link connection identifier for a frame relay endpoint. This number is used to identify the target… |
| 1.3.6.1.4.1.123.3.82.1.5.1.4 | nncFrSpvcTargVpi | 0 | 0 | This object contains the virtual path identifier (VPI) value for the Cell Relay based target endpoint. Range: 0 - 4095 |
| 1.3.6.1.4.1.123.3.82.1.5.1.5 | nncFrSpvcTargVci | 0 | 0 | This object contains the virtual channel identifier (VCI) value for the cell-relay based target endpoint. Range: 1 - 65535 |
| 1.3.6.1.4.1.123.3.82.1.5.1.6 | nncFrSpvcTargEpType | 0 | 0 | This object specifies a target endpoint as one of the following types: cellRelay (1) frameRelay (2) |
| 1.3.6.1.4.1.123.3.82.1.5.1.8 | nncFrSpvcPriority | 0 | 0 | This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Pr… |
| 1.3.6.1.4.1.123.3.82.1.5.1.9 | nncFrSpvcMaxAdminWeight | 0 | 0 | This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for … |
| 1.3.6.1.4.1.123.3.82.1.5.1.10 | nncFrSpvcOperation | 0 | 0 | This object is used to request a reroute operation. Querying this object will not provide any useful information. |
| 1.3.6.1.4.1.123.3.82.1.5.1.11 | nncFrSpvcCallStatus | 0 | 0 | This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a va… |
| 1.3.6.1.4.1.123.3.82.1.5.1.12 | nncFrSpvcLocRerouteConfig | 0 | 0 | This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for eithe… |
| 1.3.6.1.4.1.123.3.82.1.5.1.13 | nncFrSpvcSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
| 1.3.6.1.4.1.123.3.82.1.5.1.14 | nncFrSpvcFrPriority | 0 | 0 | Frame Relay Priority. |
| 1.3.6.1.4.1.123.3.82.1.5.1.15 | nncFrSpvcFrVsvdCongestionControl | 0 | 0 | Congestion Control for VS/VD endpoints, also known as Closed Loop Congestion Control (CLCC). |
| 1.3.6.1.4.1.123.3.82.1.5.1.16 | nncFrSpvcFwdFrMir | 0 | 0 | The FR Src->Dst Minimum Information Rate, used to set the minimum rate on a CLCC FR-FR SPVC connection. If nncFrSpvcFrVsvdCongesti… |
| 1.3.6.1.4.1.123.3.82.1.5.1.17 | nncFrSpvcFwdTmAr | 0 | 0 | This object is used to specify the Access Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.18 | nncFrSpvcFwdTmCir | 0 | 0 | The committed Information Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.19 | nncFrSpvcFwdTmBc | 0 | 0 | The Committed Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.20 | nncFrSpvcFwdTmBe | 0 | 0 | Excess Burst Size, Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.21 | nncFrSpvcTmIwf | 0 | 0 | Interworking Function. Values: none (None (FR Switching) = 0) networkInterworking (Network Interworking = 2)… |
| 1.3.6.1.4.1.123.3.82.1.5.1.22 | nncFrSpvcFwdTmPo | 0 | 0 | Policing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.23 | nncFrSpvcFwdTmPacing | 0 | 0 | Pacing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.24 | nncFrSpvcTmPtclMapping | 0 | 0 | Protocol Mapping for Service Interworking SPVCs. If Translated Service Interworking is selected, the a profile must be set using … |
| 1.3.6.1.4.1.123.3.82.1.5.1.25 | nncFrSpvcTmClpMapping | 0 | 0 | Cell Loss Priority Mapping, for use in FR-CR interworking SPVCs. Values: cLPEqualsDE (CLP = DE, 0) cLPEquals0 (CLP = 0, 1 ) cLPEqu… |
| 1.3.6.1.4.1.123.3.82.1.5.1.26 | nncFrSpvcTmDeMapping | 0 | 0 | Discard Eligibility Mapping, for use in FR-CR interworking SPVCs. Values: dEEqualsCLP (DE = CLP, 0) dESSCSor0 (Network Interwo… |
| 1.3.6.1.4.1.123.3.82.1.5.1.27 | nncFrSpvcTmEfciMapping | 0 | 0 | Explicit Forward Congestion Indication Mapping (Applies only to Service Interworking (IWF3), FR to ATM) Values: eFCIEqualsFECN (EF… |
| 1.3.6.1.4.1.123.3.82.1.5.1.28 | nncFrSpvcTmPvcMgntProfile | 0 | 0 | Enables or disables the PVC Management Profile. When enabled, LMI is enabled on the network-side of the connection. Used only with… |
| 1.3.6.1.4.1.123.3.82.1.5.1.29 | nncFrSpvcTmSIWProfile | 0 | 0 | The FR-CR profile index for service interworking connections. This attribute is used to define the translation profile to use whe… |
| 1.3.6.1.4.1.123.3.82.1.5.1.30 | nncFrSpvcTmRemapDlci | 0 | 0 | The source end-point Data Link Connection Identifier for many-to-one Network Interworking (IWF2) connections. |
| 1.3.6.1.4.1.123.3.82.1.5.1.31 | nncFrSpvcBwdFrMir | 0 | 0 | The FR Dst->Src Minimum Information Rate, used on CLCC-enabled connections. Range: 0 - 44210 Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.32 | nncFrSpvcBwdTmAr | 0 | 0 | This object is used to specify the Access Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.33 | nncFrSpvcBwdTmCir | 0 | 0 | The committed Information Rate, in Kb/s |
| 1.3.6.1.4.1.123.3.82.1.5.1.34 | nncFrSpvcBwdTmBc | 0 | 0 | The Committed Burst Size, in Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.35 | nncFrSpvcBwdTmBe | 0 | 0 | The Excess Burst Size, Kb. |
| 1.3.6.1.4.1.123.3.82.1.5.1.36 | nncFrSpvcBwdTmPo | 0 | 0 | Policing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.37 | nncFrSpvcBwdTmPacing | 0 | 0 | Pacing. |
| 1.3.6.1.4.1.123.3.82.1.5.1.38 | nncFrSpvcCrTmServiceCategory | 0 | 0 | This object is used to set the traffic service category for SPVC Connections. This object is dependent on the value specified i… |
| 1.3.6.1.4.1.123.3.82.1.5.1.39 | nncFrSpvcCrBwdTmTrafficDescriptor | 0 | 0 | This object contains the CR traffic descriptor for a FR-CR SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1/S_0+1 … |
| 1.3.6.1.4.1.123.3.82.1.5.1.40 | nncFrSpvcCrBwdTmPolicingOption | 0 | 0 | Policing Option for a FR SPVC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
| 1.3.6.1.4.1.123.3.82.1.5.1.41 | nncFrSpvcCrBwdTmBucketOneRate | 0 | 0 | Used in FR - CR interworking. This object is for peak cell rate (PCR), the cell rate which the cell endpoint may never exceed. I… |
| 1.3.6.1.4.1.123.3.82.1.5.1.42 | nncFrSpvcCrBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for the CR endpoint, measured in microseconds. Range: 1 - 190,00… |
| 1.3.6.1.4.1.123.3.82.1.5.1.43 | nncFrSpvcCrBwdTmBucketTwoRate | 0 | 0 | Used in FR - CR interworking. The attribute contains the SIR_0, SIR_0+1 or MIR_0+1. This parameter holds the sustained informatio… |
| 1.3.6.1.4.1.123.3.82.1.5.1.44 | nncFrSpvcCrBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.82.1.5.1.45 | nncFrSpvcCrBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) at the CR endpoint. Applicable only when the rt-VBR service category is use… |
| 1.3.6.1.4.1.123.3.82.1.5.1.46 | nncFrSpvcCrBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) at the CR endpoint of a FR-CR SPVC. Valid only when using the nrt-VBR service ca… |
| 1.3.6.1.4.1.123.3.82.1.5.1.47 | nncFrSpvcCrBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.82.1.5.1.48 | nncFrSpvcCreator | 0 | 0 | The object retrieves the creator of a given SPVC connection. |
| 1.3.6.1.4.1.123.3.82.1.5.1.49 | nncFrSpvcRowStatus | 0 | 0 | This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWa… |