Lists the available network interfaces and the
order that the Annex uses them when doing a
down-line load or up-line dump.
The list may consist of one or more interfaces
separated by commas. For example, the following
is allowed and directs the Annex to first try
to boot over the ethernet interface, then using
port 1 which is configured as a slip port
net,sl01
If the Annex is a self-boot model, a dump can
only be created if you specify an alternate
interface as the dump destination. For example
self,net
This MIB object corresponds to the NA/admin
Annex parameter 'load_dump_sequence'.
Parsed from file xylo-anx.mib.txt
Company: None
Module: XYLO-ANNEX-MIB
Lists the available network interfaces and the
order that the Annex uses them when doing a
down-line load or up-line dump.
Parsed from file ANNEX-MIB.mib
Module: ANNEX-MIB
Vendor: Xylogics, Inc.
Module: ANNEX-MIB
[Automatically extracted from oidview.com]
anxLoadDumpSeq OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Lists the available network interfaces and the order that the Annex uses them when doing a down-line load or up-line dump. The list may consist of one or more interfaces separated by commas. For example, the following is allowed and directs the Annex to first try to boot over the ethernet interface, then using port 1 which is configured as a slip port net,sl01 If the Annex is a self-boot model, a dump can only be created if you specify an alternate interface as the dump destination. For example self,net This MIB object corresponds to the NA/admin Annex parameter 'load_dump_sequence'." ::= { annexconfig 5 }
anxLoadDumpSeq OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Lists the available network interfaces and the order that the Annex uses them when doing a down-line load or up-line dump." ::= { annexconfig 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.5.5.0 | anxLoadDumpSeq | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.15.2.5.1 | anxInetAddr | 1 | 1 | The Internet address of the Annex. |
1.3.6.1.4.1.15.2.5.2 | anxPrefLoadAddr | 1 | 1 | The preferred load address for the Annex. |
1.3.6.1.4.1.15.2.5.3 | anxPrefDumpAddr | 1 | 1 | The preferred dump address for the Annex. |
1.3.6.1.4.1.15.2.5.4 | anxLoadDumpGateway | 1 | 1 | The Internet address of a gateway used when the preferred load or dump host is on a different network or subnet. |
1.3.6.1.4.1.15.2.5.6 | anxLoadBcast | 1 | 1 | This parameter defines whether the Annex broadcasts for the config or the motd files if they were not found on the preferred load … |
1.3.6.1.4.1.15.2.5.7 | anxServerCap | 1 | 1 | Defines whether the Annex can act as a file server host for another Annex. The allowable values are 'all', 'none' (the default), … |
1.3.6.1.4.1.15.2.5.8 | anxTimeBcast | 1 | 1 | This parameter defines whether the Annex broadcasts for the time if the preferred load host does not provide a time server. |
1.3.6.1.4.1.15.2.5.9 | anxBcastAddr | 1 | 1 | The Internet address used by the Annex when sending broadcasts. |
1.3.6.1.4.1.15.2.5.10 | anxSubnetMask | 1 | 1 | The Internet subnet mask. |
1.3.6.1.4.1.15.2.5.11 | anxAuthAgent | 1 | 1 | This parameter controls whether the Annex can send an ICMP Address Mask Reply to a received ICMP Address Mask Request. |
1.3.6.1.4.1.15.2.5.12 | anxMaxVcli | 1 | 1 | The maximum number of virtual CLI connections allowed by the Annex at any one time. 0 means the Annex does not allow VCLI connec… |
1.3.6.1.4.1.15.2.5.13 | anxIpEncapType | 1 | 1 | This parameter specifies whether the Annex encapsulates IP packets in the Ethernet format or the IEEE 802.2/802.3 Data Link Layer… |
1.3.6.1.4.1.15.2.5.14 | anxNameServer1Type | 1 | 1 | The name service type used by the primary nameserver host. |
1.3.6.1.4.1.15.2.5.15 | anxNameServer1Addr | 1 | 1 | The Internet address of the primary nameserver host. |
1.3.6.1.4.1.15.2.5.16 | anxNameServer2Type | 1 | 1 | The name service type used by the secondary nameserver host. |
1.3.6.1.4.1.15.2.5.17 | anxNameServer2Addr | 1 | 1 | The Internet address of the secondary nameserver host. |
1.3.6.1.4.1.15.2.5.18 | anxNameServerBcast | 1 | 1 | This parameter controls whether the Annex broadcasts a name server request if the preferred name servers do not respond. |
1.3.6.1.4.1.15.2.5.19 | anxRwhod | 1 | 1 | Defines whether the Annex listens for RWHO broadcasts when building its host table. |
1.3.6.1.4.1.15.2.5.20 | anxMinUniqueHostNames | 1 | 1 | Defines whether the Annex minimum uniqueness feature is available. |
1.3.6.1.4.1.15.2.5.21 | anxHostTableSize | 1 | 1 | Defines the number of entries in the Annex host table. 0 indicates no host table. 251 sets no limit on the size of the table. |
1.3.6.1.4.1.15.2.5.22 | anxRouted | 1 | 1 | Defines whether the RIP-listener of the routing daemon on the Annex is enabled. |
1.3.6.1.4.1.15.2.5.23 | anxEnableSecurity | 1 | 1 | This parameter controls whether the Annex security system is enabled. |
1.3.6.1.4.1.15.2.5.24 | anxPassword | 1 | 1 | Setting this parameter changes the Annex's administration password. Reading this parameter will return either |
1.3.6.1.4.1.15.2.5.25 | anxSecurServer1Addr | 1 | 1 | The Internet address of the primary host where the Annex sends its security requests. |
1.3.6.1.4.1.15.2.5.26 | anxSecurServer2Addr | 1 | 1 | The Internet address of the secondary host where the Annex sends its security requests. |
1.3.6.1.4.1.15.2.5.27 | anxNetTurnAround | 1 | 1 | The amount of time (in seconds) that the Annex waits for a response from a security server. |
1.3.6.1.4.1.15.2.5.28 | anxSecurBcast | 1 | 1 | This parameter controls whether the Annex will broadcast its security requests when neither of the preferred security servers are… |
1.3.6.1.4.1.15.2.5.29 | anxVcliSecurity | 1 | 1 | This parameter controls whether the Annex performs user validation on the virtual CLI connections. |
1.3.6.1.4.1.15.2.5.30 | anxVcliPassword | 1 | 1 | This parameter defines a password used by the Annex when setting up a virtual CLI connection. |
1.3.6.1.4.1.15.2.5.31 | anxAcpKey | 1 | 1 | This parameter defines the Annex's encryption key used when exchanging messages between the Annex and the security server. |
1.3.6.1.4.1.15.2.5.32 | anxSysLogMask | 1 | 1 | Defines the priority levels of events logged in the Annex syslog file. The allowable values are 'all', 'none', or one or more of t… |
1.3.6.1.4.1.15.2.5.33 | anxSysLogFacility | 1 | 1 | This parameter defines the 4.3BSD syslog facility used in logging the Annex messages. |
1.3.6.1.4.1.15.2.5.34 | anxSysLogHost | 1 | 1 | The Internet address of the host configured to log Annex messages. |
1.3.6.1.4.1.15.2.5.35 | anxCliPrompt | 1 | 1 | The string used by the Annex to prompt all CLI users. |
1.3.6.1.4.1.15.2.5.36 | anxMotdFile | 1 | 1 | The host file name that contains the message-of-the-day for the Annex. |
1.3.6.1.4.1.15.2.5.37 | anxTftpDirName | 1 | 1 | Specifies the directory name to be prepended to all files (boot image, motd, macros, etc.) when booting via TFTP. |
1.3.6.1.4.1.15.2.5.38 | anxTftpDumpName | 1 | 1 | The full pathname of the TFTP dump file, if any. |
1.3.6.1.4.1.15.2.5.39 | anxTimeZone | 1 | 1 | Defines the timezone where the Annex resides in minutes west of GMT. |
1.3.6.1.4.1.15.2.5.40 | anxDaylightSavings | 1 | 1 | Defines the daylight savings time for the geographic location of the Annex. |
1.3.6.1.4.1.15.2.5.41 | anxLatKey | 1 | 1 | The Annex specific LAT key used to enable or disable the LAT protocol. |
1.3.6.1.4.1.15.2.5.42 | anxCircuitTimer | 1 | 1 | The time interval in tens of milliseconds between the transmission of LAT packets. |
1.3.6.1.4.1.15.2.5.43 | anxFacilityNum | 1 | 1 | The LAT facility number. |
1.3.6.1.4.1.15.2.5.44 | anxLatGroupVal | 1 | 1 | The Annex LAT group code for permitting access to LAT services. To access a specific LAT service, the Annex must have at least o… |
1.3.6.1.4.1.15.2.5.45 | anxKeepAliveTimer | 1 | 1 | The time interval, in seconds, between the transmission of identification packets during times of network inactivity. |
1.3.6.1.4.1.15.2.5.46 | anxReXmitLimit | 1 | 1 | The number of times to retransmit a packet before notifying the user of a network failure. |
1.3.6.1.4.1.15.2.5.47 | anxServerName | 1 | 1 | A string of up to 16 characters used to name the Annex in the LAT protocol. |
1.3.6.1.4.1.15.2.5.48 | anxServiceLimit | 1 | 1 | This parameter defines the upper bound on the number of services that the Annex can maintain in its local service table. |
1.3.6.1.4.1.15.2.5.49 | anxConfigFile | 1 | 1 | The name of the host file that contains the alias and menu entries. |
1.3.6.1.4.1.15.2.5.50 | anxLatVcliGroupVal | 1 | 1 | This Annex parameter specifies which remote group codes are accessible to virtual cli users. All virtual cli users have the same … |
1.3.6.1.4.1.15.2.5.51 | anxLatQueueMax | 1 | 1 | Defines the maximum number of host requests (HIC's) that the Annex will save in its internal queue when the requested resource is… |
1.3.6.1.4.1.15.2.5.52 | anxLatLocation | 1 | 1 | A string of up to 32 characters used to identify the location of the Annex for the LAT protocol. |
1.3.6.1.4.1.15.2.5.53 | anxDisabledModules | 1 | 1 | Defines which selectable modules are currently disabled. The allowable values are 'all', 'none' or one or more of the following n… |
1.3.6.1.4.1.15.2.5.54 | anxSysLogPort | 1 | 1 | Specifies the Annex port number where syslog messages are sent. If set to 0, syslog messages are not sent to an Annex port. Thi… |
1.3.6.1.4.1.15.2.5.55 | anxOptionKey | 1 | 1 | The Annex specific software option key used to enable or disable the AppleTalk, dynamic routing and TN3270 support. This MIB obje… |
... |