Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restPortEntry OBJECT-TYPE SYNTAX RestPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { restPortAddr } ::= { restPortTable 1 }
restPortEntry OBJECT-TYPE SYNTAX RestPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { restPortAddr } ::= { restPortTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.2.5.1.1 | restPortAddr | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.2 | restPortDiagnostics | 0 | 0 | Remove will free up the bus bandwidth used by the port. It will also set the port configuration start mode to off. This command wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.3 | restPortStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.4 | restPortSubStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.5 | restPortCondition | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.6 | restPortSubCondition | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.7 | restPortType | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.8 | restPortLoopbackType | 0 | 0 | Indicates what type of loopback the user wishes to set on the port. lim specifies a local interface loopback. limDisc specifies a … |
1.3.6.1.4.1.16.101.1.2.2.5.1.9 | restPortLoopbackDuration | 0 | 0 | Value 65535 specifies a permanent loopback. |
1.3.6.1.4.1.16.101.1.2.2.5.1.10 | restPortLoopbackStatus | 0 | 0 | If the port is in loopback, this field indicates the type of loopback. If the port is not in loopback, then none will be returned. |
1.3.6.1.4.1.16.101.1.2.2.5.1.11 | restPortLoopbackInitiator | 0 | 0 | If value is local, then loopback was initiated by user. If value is remote, then loopback was initiated by network. If no loopback… |
1.3.6.1.4.1.16.101.1.2.2.5.1.12 | restPortErrorIndication | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.13 | restPortSevereIndication | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.14 | restPortBGDiagResults | 0 | 0 | Results of port background diagnostics. Bit map is the same as for one port within recfSlotModulePortDiagMask. |
1.3.6.1.4.1.16.101.1.2.2.5.1.15 | restPortNumberOfBundles | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.16 | restPortPhasorStatus | 0 | 0 | All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 in… |
1.3.6.1.4.1.16.101.1.2.2.5.1.17 | restPortMappedPhy | 0 | 0 | For virtual port addresses, returns the physical port that this address is mapped to. If the virtual port address is not mapped t… |
1.3.6.1.4.1.16.101.1.2.2.5.1.18 | restPortSdmFunction | 0 | 0 | Only applies to SDM ports (except SDM modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced)). The b… |
1.3.6.1.4.1.16.101.1.2.2.5.1.19 | restPortSdmTFunction | 0 | 0 | Only applies to SDM ports. bit 1 (lsb) - TM if DTE, LL if DCE bit 2 - reserved if DTE, RL if DCE bit 3 - reserved bit 4 - reserved b… |
1.3.6.1.4.1.16.101.1.2.2.5.1.20 | restPortBundleInTone | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.21 | restPortSdmSignalStatus | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.22 | restPortSdmBipolarViolationInd | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.23 | restPortCapabilities | 0 | 0 | If this attribute is not applicable, the return value consists of octet string of size 1 with the value none (255). Currently supp… |