If this attribute is not applicable, the
return value consists of octet string of size 1
with the value none (255).
Currently supported only by SDM port. The
interpretation of the octet string is listed
below. For those capabilities specified using
bit fields (module and port speed capabilities,
as listed below), a value of one (1) means that
the feature is supported, while zero (0)
indicates that it is not supported.
First byte: physical capabilities
01h - bulk (no separate connector for
this port)
02h - 15 pin connector
03h - 25 pin connector
04h - RJ45 (8 pin modular) connector
05h - 75 ohm coax connector
Second byte: electrical capabilities
01h - V.24
02h - V.35
04h - V.11
11h - E1 balanced
12h - E1 unbalanced
41h - 64K G.703 codirectional
Third byte: module capabilities
bit 1 (lsb) - supports redundancy
bit 2 - supports loopback leads (RL,
LL, and TM)
bit 3 - supports LIM/DSC
bit 4 - supports function leads (RTS,
CTS, etc.)
bits 5-8 - indicates clock modes
01h - supports DCE
02h - supports DTE
03h - supports DTE and DCE
04h - supports DTE1 only
Fourth byte: port speed capabilities
bit 1 (lsb) - various (supports
multiple, user-programmable
data rates on the ports)
bit 2 - supports 64 kbps
bit 3 - supports 1.544 Mbps
bit 4 - supports 2.048 Mbps
bits 5-8 - reserved for future use
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
If this attribute is not applicable, the
return value consists of octet string of size 1
with the value none (255).
Currently supported only by SDM port. The
interpretation of the octet string is listed
below. For those capabilities specified using
bit fields (module and port speed capabilities,
as listed below), a value of one (1) means that
the feature is supported, while zero (0)
indicates that it is not supported.
First byte: physical capabilities
01h - bulk (no separate connector for
this port)
02h - 15 pin connector
03h - 25 pin connector
04h - RJ45 (8 pin modular) connector
05h - 75 ohm coax connector
Second byte: electrical capabilities
01h - V.24
02h - V.35
04h - V.11
11h - E1 balanced
12h - E1 unbalanced
41h - 64K G.703 codirectional
Third byte: module capabilities
bit 1 (lsb) - supports redundancy
bit 2 - supports loopback leads (RL,
LL, and TM)
bit 3 - supports LIM/DSC
bit 4 - supports function leads (RTS,
CTS, etc.)
bits 5-8 - indicates clock modes
01h - supports DCE
02h - supports DTE
03h - supports DTE and DCE
04h - supports DTE1 only
Fourth byte: port speed capabilities
bit 1 (lsb) - various (supports
multiple, user-programmable
data rates on the ports)
bit 2 - supports 64 kbps
bit 3 - supports 1.544 Mbps
bit 4 - supports 2.048 Mbps
bits 5-8 - reserved for future use
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restPortCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "If this attribute is not applicable, the return value consists of octet string of size 1 with the value none (255). Currently supported only by SDM port. The interpretation of the octet string is listed below. For those capabilities specified using bit fields (module and port speed capabilities, as listed below), a value of one (1) means that the feature is supported, while zero (0) indicates that it is not supported. First byte: physical capabilities 01h - bulk (no separate connector for this port) 02h - 15 pin connector 03h - 25 pin connector 04h - RJ45 (8 pin modular) connector 05h - 75 ohm coax connector Second byte: electrical capabilities 01h - V.24 02h - V.35 04h - V.11 11h - E1 balanced 12h - E1 unbalanced 41h - 64K G.703 codirectional Third byte: module capabilities bit 1 (lsb) - supports redundancy bit 2 - supports loopback leads (RL, LL, and TM) bit 3 - supports LIM/DSC bit 4 - supports function leads (RTS, CTS, etc.) bits 5-8 - indicates clock modes 01h - supports DCE 02h - supports DTE 03h - supports DTE and DCE 04h - supports DTE1 only Fourth byte: port speed capabilities bit 1 (lsb) - various (supports multiple, user-programmable data rates on the ports) bit 2 - supports 64 kbps bit 3 - supports 1.544 Mbps bit 4 - supports 2.048 Mbps bits 5-8 - reserved for future use" ::= { restPortEntry 23 }
restPortCapabilities OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "If this attribute is not applicable, the return value consists of octet string of size 1 with the value none (255). Currently supported only by SDM port. The interpretation of the octet string is listed below. For those capabilities specified using bit fields (module and port speed capabilities, as listed below), a value of one (1) means that the feature is supported, while zero (0) indicates that it is not supported. First byte: physical capabilities 01h - bulk (no separate connector for this port) 02h - 15 pin connector 03h - 25 pin connector 04h - RJ45 (8 pin modular) connector 05h - 75 ohm coax connector Second byte: electrical capabilities 01h - V.24 02h - V.35 04h - V.11 11h - E1 balanced 12h - E1 unbalanced 41h - 64K G.703 codirectional Third byte: module capabilities bit 1 (lsb) - supports redundancy bit 2 - supports loopback leads (RL, LL, and TM) bit 3 - supports LIM/DSC bit 4 - supports function leads (RTS, CTS, etc.) bits 5-8 - indicates clock modes 01h - supports DCE 02h - supports DTE 03h - supports DTE and DCE 04h - supports DTE1 only Fourth byte: port speed capabilities bit 1 (lsb) - various (supports multiple, user-programmable data rates on the ports) bit 2 - supports 64 kbps bit 3 - supports 1.544 Mbps bit 4 - supports 2.048 Mbps bits 5-8 - reserved for future use" ::= { restPortEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16.101.1.2.2.5.1.1 | restPortAddr | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.2 | restPortDiagnostics | 0 | 0 | Remove will free up the bus bandwidth used by the port. It will also set the port configuration start mode to off. This command wi… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.3 | restPortStatus | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.4 | restPortSubStatus | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.5 | restPortCondition | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.6 | restPortSubCondition | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.7 | restPortType | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.8 | restPortLoopbackType | 0 | 0 | Indicates what type of loopback the user wishes to set on the port. lim specifies a local interface loopback. limDisc specifies a … |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.9 | restPortLoopbackDuration | 0 | 0 | Value 65535 specifies a permanent loopback. |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.10 | restPortLoopbackStatus | 0 | 0 | If the port is in loopback, this field indicates the type of loopback. If the port is not in loopback, then none will be returned. |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.11 | restPortLoopbackInitiator | 0 | 0 | If value is local, then loopback was initiated by user. If value is remote, then loopback was initiated by network. If no loopback… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.12 | restPortErrorIndication | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.13 | restPortSevereIndication | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.14 | restPortBGDiagResults | 0 | 0 | Results of port background diagnostics. Bit map is the same as for one port within recfSlotModulePortDiagMask. |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.15 | restPortNumberOfBundles | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.16 | restPortPhasorStatus | 0 | 0 | All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 in… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.17 | restPortMappedPhy | 0 | 0 | For virtual port addresses, returns the physical port that this address is mapped to. If the virtual port address is not mapped t… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.18 | restPortSdmFunction | 0 | 0 | Only applies to SDM ports (except SDM modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced)). The b… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.19 | restPortSdmTFunction | 0 | 0 | Only applies to SDM ports. bit 1 (lsb) - TM if DTE, LL if DCE bit 2 - reserved if DTE, RL if DCE bit 3 - reserved bit 4 - reserved b… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.20 | restPortBundleInTone | 0 | 0 | None |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.21 | restPortSdmSignalStatus | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |
| 1.3.6.1.4.1.16.101.1.2.2.5.1.22 | restPortSdmBipolarViolationInd | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |