All bits zero indicates normal.
bit 1 (lsb) indicates receive phasor underflow
bit 2 indicates receive phasor overflow
bit 3 indicates receive phasor empty
bit 4 indicates receive phasor full
bit 5 indicates receive phasor fifo error
bit 6 indicates KGROS status
bit 7 indicates KGLOS status
bit 8 indicates receive phasor not applicable
bit 9 indicates transmit phasor underflow
bit 10 indicates transmit phasor overflow
bit 11 indicates transmit phasor empty
bit 12 indicates transmit phasor full
bit 13 indicates transmit phasor fifo error
bit 14 indicates KG status is not applicable
bit 15 is reserved
bit 16 indicates transmit phasor not applicable
If port does not have a phasor, the return
value will be x8080.
Bits 6 and 7 are applicable only to SDM module
and reflect the KG-resync lines status as follows:
bit 6|bit 7
0 | 0 KG-status O.K. disabled / disabled
1 | 0 KG-status ERR enabled / disabled
0 | 1 KG-status ERR disabled / enabled
1 | 1 KG-status ERR enabled / enabled .
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
All bits zero indicates normal.
bit 1 (lsb) indicates receive phasor underflow
bit 2 indicates receive phasor overflow
bit 3 indicates receive phasor empty
bit 4 indicates receive phasor full
bit 5 indicates receive phasor fifo error
bit 6 indicates KGROS status
bit 7 indicates KGLOS status
bit 8 indicates receive phasor not applicable
bit 9 indicates transmit phasor underflow
bit 10 indicates transmit phasor overflow
bit 11 indicates transmit phasor empty
bit 12 indicates transmit phasor full
bit 13 indicates transmit phasor fifo error
bit 14 indicates KG status is not applicable
bit 15 is reserved
bit 16 indicates transmit phasor not applicable
If port does not have a phasor, the return
value will be x8080.
Bits 6 and 7 are applicable only to SDM module
and reflect the KG-resync lines status as follows:
bit 6|bit 7
0 | 0 KG-status O.K. disabled / disabled
1 | 0 KG-status ERR enabled / disabled
0 | 1 KG-status ERR disabled / enabled
1 | 1 KG-status ERR enabled / enabled .
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restPortPhasorStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 indicates receive phasor empty bit 4 indicates receive phasor full bit 5 indicates receive phasor fifo error bit 6 indicates KGROS status bit 7 indicates KGLOS status bit 8 indicates receive phasor not applicable bit 9 indicates transmit phasor underflow bit 10 indicates transmit phasor overflow bit 11 indicates transmit phasor empty bit 12 indicates transmit phasor full bit 13 indicates transmit phasor fifo error bit 14 indicates KG status is not applicable bit 15 is reserved bit 16 indicates transmit phasor not applicable If port does not have a phasor, the return value will be x8080. Bits 6 and 7 are applicable only to SDM module and reflect the KG-resync lines status as follows: bit 6|bit 7 0 | 0 KG-status O.K. disabled / disabled 1 | 0 KG-status ERR enabled / disabled 0 | 1 KG-status ERR disabled / enabled 1 | 1 KG-status ERR enabled / enabled ." ::= { restPortEntry 16 }
restPortPhasorStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "All bits zero indicates normal. bit 1 (lsb) indicates receive phasor underflow bit 2 indicates receive phasor overflow bit 3 indicates receive phasor empty bit 4 indicates receive phasor full bit 5 indicates receive phasor fifo error bit 6 indicates KGROS status bit 7 indicates KGLOS status bit 8 indicates receive phasor not applicable bit 9 indicates transmit phasor underflow bit 10 indicates transmit phasor overflow bit 11 indicates transmit phasor empty bit 12 indicates transmit phasor full bit 13 indicates transmit phasor fifo error bit 14 indicates KG status is not applicable bit 15 is reserved bit 16 indicates transmit phasor not applicable If port does not have a phasor, the return value will be x8080. Bits 6 and 7 are applicable only to SDM module and reflect the KG-resync lines status as follows: bit 6|bit 7 0 | 0 KG-status O.K. disabled / disabled 1 | 0 KG-status ERR enabled / disabled 0 | 1 KG-status ERR disabled / enabled 1 | 1 KG-status ERR enabled / enabled ." ::= { restPortEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.2.5.1.1 | restPortAddr | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.2 | restPortDiagnostics | 0 | 0 | Remove will free up the bus bandwidth used by the port. It will also set the port configuration start mode to off. This command wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.3 | restPortStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.4 | restPortSubStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.5 | restPortCondition | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.6 | restPortSubCondition | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.7 | restPortType | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.8 | restPortLoopbackType | 0 | 0 | Indicates what type of loopback the user wishes to set on the port. lim specifies a local interface loopback. limDisc specifies a … |
1.3.6.1.4.1.16.101.1.2.2.5.1.9 | restPortLoopbackDuration | 0 | 0 | Value 65535 specifies a permanent loopback. |
1.3.6.1.4.1.16.101.1.2.2.5.1.10 | restPortLoopbackStatus | 0 | 0 | If the port is in loopback, this field indicates the type of loopback. If the port is not in loopback, then none will be returned. |
1.3.6.1.4.1.16.101.1.2.2.5.1.11 | restPortLoopbackInitiator | 0 | 0 | If value is local, then loopback was initiated by user. If value is remote, then loopback was initiated by network. If no loopback… |
1.3.6.1.4.1.16.101.1.2.2.5.1.12 | restPortErrorIndication | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.13 | restPortSevereIndication | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.14 | restPortBGDiagResults | 0 | 0 | Results of port background diagnostics. Bit map is the same as for one port within recfSlotModulePortDiagMask. |
1.3.6.1.4.1.16.101.1.2.2.5.1.15 | restPortNumberOfBundles | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.17 | restPortMappedPhy | 0 | 0 | For virtual port addresses, returns the physical port that this address is mapped to. If the virtual port address is not mapped t… |
1.3.6.1.4.1.16.101.1.2.2.5.1.18 | restPortSdmFunction | 0 | 0 | Only applies to SDM ports (except SDM modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced)). The b… |
1.3.6.1.4.1.16.101.1.2.2.5.1.19 | restPortSdmTFunction | 0 | 0 | Only applies to SDM ports. bit 1 (lsb) - TM if DTE, LL if DCE bit 2 - reserved if DTE, RL if DCE bit 3 - reserved bit 4 - reserved b… |
1.3.6.1.4.1.16.101.1.2.2.5.1.20 | restPortBundleInTone | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.5.1.21 | restPortSdmSignalStatus | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.22 | restPortSdmBipolarViolationInd | 0 | 0 | Only applies to SDM ports on modules of hardware subtypes 33 (4 ports E1 balanced) and 34 (4 ports E1 unbalanced). Otherwise it wi… |
1.3.6.1.4.1.16.101.1.2.2.5.1.23 | restPortCapabilities | 0 | 0 | If this attribute is not applicable, the return value consists of octet string of size 1 with the value none (255). Currently supp… |