Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Indicates the alarm state in the module-all level, i.e. lower level
(port alarms) included.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
mdlSAlrStatusAll OBJECT-TYPE SYNTAX INTEGER { off (2), event (3), minor (4), major (5), warning (6), critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation." ::= { mdlSInstEntry 6 }
mdlSAlrStatusAll OBJECT-TYPE SYNTAX INTEGER { off (2), event (3), minor (4), major (5), warning (6), critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation." ::= { mdlSInstEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.3.1.3.1.1.1.1 | mdlSInstSltIdx | 0 | 0 | A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.… |
1.3.6.1.4.1.164.3.1.3.1.1.1.2 | mdlSInstCardType | 0 | 0 | This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Onl… |
1.3.6.1.4.1.164.3.1.3.1.1.1.3 | mdlSHwVersion | 0 | 0 | This attribute indicates the Hardware version of the installed card in the specific slot position. |
1.3.6.1.4.1.164.3.1.3.1.1.1.4 | mdlSSwVersion | 0 | 0 | This attribute indicates the Software version of the installed card in the specific slot position. |
1.3.6.1.4.1.164.3.1.3.1.1.1.5 | mdlSAlrStatus | 0 | 0 | Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: c… |
1.3.6.1.4.1.164.3.1.3.1.1.1.7 | mdlSMaskedAlrStat | 0 | 0 | Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This … |
1.3.6.1.4.1.164.3.1.3.1.1.1.8 | mdlSMaskedAlrStatAll | 0 | 0 | Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribu… |
1.3.6.1.4.1.164.3.1.3.1.1.1.9 | mdlSTstStatusAll | 0 | 0 | This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value wil… |
1.3.6.1.4.1.164.3.1.3.1.1.1.10 | mdlSClearAlrCmd | 0 | 0 | Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear opera… |
1.3.6.1.4.1.164.3.1.3.1.1.1.11 | mdlSClearAllAlrCmd | 0 | 0 | Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear oper… |