modmPrtDteIftype
View at oid-info.com
The interface type of the DTE port.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
The interface type of the DTE port.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
modmPrtDteIfType OBJECT-TYPE SYNTAX INTEGER { v24 (1), rs530 (2), x21 (3), g703 (4), v36 (5), v35 (6), g703r64k (7), hdb3 (8), ethernet (9), g703T1 (10), ethBNC (11), noIR (15), ipUtp (16), ethQ (17), rs530WA (18), v35WA (19), g704E1 (20), ethQN (21), other (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface type of the DTE port." ::= { modmPrtDteEntry 8}
modmPrtDteIfType OBJECT-TYPE SYNTAX INTEGER { v24 (1), rs530 (2), x21 (3), g703 (4), v36 (5), v35 (6), g703r64k (7), hdb3 (8), ethernet (9), g703T1 (10), ethBNC (11), noIR (15), ipUtp (16), ethQ (17), rs530WA (18), v35WA (19), g704E1 (20), ethQN (21), other (255) } MAX-ACCESS read-only STATUS current DESCRIPTION "The interface type of the DTE port." ::= { modmPrtDteEntry 8}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.4.4.4.1.1.1 | modmPrtDteIndex | 0 | 0 | The DTE port index. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.2 | modmPrtDteProtocol | 0 | 0 | The DTE port Protocol. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.3 | modmPrtDteDataBits | 0 | 0 | The DTE number of data bits. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.4 | modmPrtDteStopBits | 0 | 0 | The DTE minimum number of stop bits in the tx async frame. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.5 | modmPrtDteRate | 0 | 0 | The DTE port rate. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.6 | modmPrtDteCtsDelay | 0 | 0 | CTS/RTS delay, in msec. dxx = xx msec. notApplicable - for ASMi-31, ASMi-32. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.7 | modmPrtDteParity | 0 | 0 | This attribute indicates the parity mode in async frame. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.9 | modmPrtDteRlbEnable | 0 | 0 | Enable/Disable Remote Loop-Back on this modem, externally initiated. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.10 | modmPrtDteAlbEnable | 0 | 0 | Enable/Disable Analog Loop-Back on this modem, externally initiated. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.11 | modmPrtDteRtsDcdEnable | 0 | 0 | Enable/Disable RTS-DCD. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.12 | modmPrtDteDsrDtrEnable | 0 | 0 | Enable/Disable DSR-DTR. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.13 | modmPrtDteSignaling | 0 | 0 | Each bit represents a specific signal state. 1 - means : signal is ON , Enabled, Yes (exists) 0 - means : signal is OFF, Disabled… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.14 | modmPrtDteLoops | 0 | 0 | Loops that can be run on the DTE port. none - no loop (stop running loop) ana - Local Analog Line loop rem - Remote Analog Line … |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.15 | modmPrtDteTests | 0 | 0 | This is a mask which indicates - for Get: which tests are running on the DTE port. - for Set: tests the user wishes to start or s… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.16 | modmPrtDteClearAllTests | 0 | 0 | Setting this attribute to on, clears all the running loops and tests of the DTE port. Upon completion, the value will automatical… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.17 | modmPrtDteBertResult | 0 | 0 | Result of BERT for the selected DTE port. Applicable only if BERT is running on the DTE port. |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.18 | modmPrtDteErrCorrect | 0 | 0 | notApplicable - for modems that do not support this object on - will start a random error correction process. onBurst - will… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.19 | modmPrtDteV54DigitalTest | 0 | 0 | Enables to start a remote digital loopback upon recognition of a special pattern. disable - will not start a digital loopback wh… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.20 | modmPrtDteV54DigitalTestStatus | 0 | 0 | Indicates whether a remote digital test was triggered by a pattern by the remote modem or not. no - the digital test wasn't trig… |
| 1.3.6.1.4.1.164.3.4.4.4.1.1.21 | modmPrtDteTestTimeOut | 0 | 0 | Indicates the timeout for LLB test. 0=Forever |