This entry specifies the editing PAD service signals.
The integer values have the following meanings:
(0) No editing PAD service signals
(1) Editing PAD service signals for printing terminals
(2) Editing PAD service signals for display terminals
(3) to (126) Editing PAD service signals using the desired character from IA5.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This entry specifies the editing PAD service signals.
The integer values have the following meanings:
(0) No editing PAD service signals
(1) Editing PAD service signals for printing terminals
(2) Editing PAD service signals for display terminals
(3) to (126) Editing PAD service signals using the desired character from IA5.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
(
0..126 )
Automatically extracted from www.mibdepot.com
pktSwchAsyncRunProEditServSig OBJECT-TYPE SYNTAX Integer32 (0..126) MAX-ACCESS read-only STATUS current DESCRIPTION "This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing terminals (2) Editing PAD service signals for display terminals (3) to (126) Editing PAD service signals using the desired character from IA5." ::= { pktSwchAsyncRunProEntry 21 }
pktSwchAsyncRunProEditServSig OBJECT-TYPE SYNTAX Integer32 (0..126) MAX-ACCESS read-only STATUS current DESCRIPTION "This entry specifies the editing PAD service signals. The integer values have the following meanings: (0) No editing PAD service signals (1) Editing PAD service signals for printing terminals (2) Editing PAD service signals for display terminals (3) to (126) Editing PAD service signals using the desired character from IA5." ::= { pktSwchAsyncRunProEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.2.6.1.1 | pktSwchAsyncRunProIfIndex | 0 | 0 | An index for the table. |
1.3.6.1.4.1.164.8.2.6.1.2 | pktSwchAsyncRunProChannelNumber | 0 | 0 | The channel to which this entry applies. This value is the same as the pktSwchChannelNumber. |
1.3.6.1.4.1.164.8.2.6.1.3 | pktSwchAsyncRunProRecallChar | 0 | 0 | The character specified by this entry is used to escape from the data transfer mode and enter the PAD command mode. The integer… |
1.3.6.1.4.1.164.8.2.6.1.4 | pktSwchAsyncRunProEcho | 0 | 0 | This determines if an echo of the input characters is retured to the DTE. The options are either 'echo enabled' or 'no echo'. |
1.3.6.1.4.1.164.8.2.6.1.5 | pktSwchAsyncRunProDataForwChar | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) u… |
1.3.6.1.4.1.164.8.2.6.1.6 | pktSwchAsyncRunProIdleTimer | 0 | 0 | Packets will be forwarded when the idle timer expires. The idle time interval is specified as a multiple of 50 milliseconds. T… |
1.3.6.1.4.1.164.8.2.6.1.7 | pktSwchAsyncRunProDevFlowCont | 0 | 0 | This parameter determines whether or not the PAD uses software flow control for the attached device. The options are either (1)… |
1.3.6.1.4.1.164.8.2.6.1.8 | pktSwchAsyncRunProServSig | 0 | 0 | This parameter is used to instruct the PAD whether to transfer PAD service signals and the PAD prompt to the local DTE in standa… |
1.3.6.1.4.1.164.8.2.6.1.9 | pktSwchAsyncRunProBreak | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a PAD operation on receipt of the break sig… |
1.3.6.1.4.1.164.8.2.6.1.10 | pktSwchAsyncRunProDiscOut | 0 | 0 | This parameter instructs the PAD whether to forward the user sequences included in data packets to the local DTE or discard them… |
1.3.6.1.4.1.164.8.2.6.1.11 | pktSwchAsyncRunProCRPPadding | 0 | 0 | This parameter specifies the number of padding characters to be added after a carriage return character is transmitted to the lo… |
1.3.6.1.4.1.164.8.2.6.1.12 | pktSwchAsyncRunProLineFold | 0 | 0 | This parameter specifies the maximum number of characters to be inserted before the format effector. If the value is zero, ther… |
1.3.6.1.4.1.164.8.2.6.1.13 | pktSwchAsyncRunProSpeed | 0 | 0 | This parameter determines the rate of data transmission to and from the DTE. |
1.3.6.1.4.1.164.8.2.6.1.14 | pktSwchAsyncRunProPadFlowCont | 0 | 0 | This determines whether or not the terminal can exercise flow control over the PAD. The options are either 'device can exercise … |
1.3.6.1.4.1.164.8.2.6.1.15 | pktSwchAsyncRunProLineFeedInsert | 0 | 0 | This parameter indicates when there is a line feed insertion after CR. The options are (1) Insert line feed after transmission … |
1.3.6.1.4.1.164.8.2.6.1.16 | pktSwchAsyncRunProLineFeedPad | 0 | 0 | This parameter specifies the number of padding characters to be added after a line feed. |
1.3.6.1.4.1.164.8.2.6.1.17 | pktSwchAsyncRunProEditing | 0 | 0 | This parameter specifies the editing capabilities available in the data transfer mode. Editing is always possible when the PAD i… |
1.3.6.1.4.1.164.8.2.6.1.18 | pktSwchAsyncRunProCharDel | 0 | 0 | This parameter specifies the character delete, which is one character from IA5. The default selection is 127 (character DEL). |
1.3.6.1.4.1.164.8.2.6.1.19 | pktSwchAsyncRunProLineDel | 0 | 0 | This parameter specifies the line delete, which is one character from IA5. The default selection is 24 (character CAN). |
1.3.6.1.4.1.164.8.2.6.1.20 | pktSwchAsyncRunProLineDisp | 0 | 0 | This entry specifies the line display character, which is one character from IA5. The default selection is 18 (character DC2). |
1.3.6.1.4.1.164.8.2.6.1.22 | pktSwchAsyncRunProEchomask | 0 | 0 | The value is a sum of values (powers of two), where each value in the sum represents a character (or characters) that is (are) i… |
1.3.6.1.4.1.164.8.2.6.1.23 | pktSwchAsyncRunProParTreat | 0 | 0 | This entry controls the generation of parity bits in the data sent to the local DTE and the checking of the parity bit when gene… |
1.3.6.1.4.1.164.8.2.6.1.24 | pktSwchAsyncRunProPageWait | 0 | 0 | This entry specifies the number of line feed characters counted by the PAD before the page wait condition is entered. If the va… |