This parameter shows whether the PS will Transmit Idles between
frames and control the RTS pin.
Default: no(2).
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This parameter shows whether the PS will Transmit Idles between
frames and control the RTS pin.
Default: no(2).
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchFrTxIdlesS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter shows whether the PS will Transmit Idles between frames and control the RTS pin. Default: no(2)." ::= { pktSwchFrSEntry 13 }
pktSwchFrTxIdlesS OBJECT-TYPE SYNTAX INTEGER { no(2), yes(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter shows whether the PS will Transmit Idles between frames and control the RTS pin. Default: no(2)." ::= { pktSwchFrSEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.8.8.2.1.1 | pktSwchFrIfIndexS | 0 | 0 | This is the ifIndex of the frame relay port. |
| 1.3.6.1.4.1.164.8.8.2.1.2 | pktSwchFrMaintProtS | 0 | 0 | This defines what maintenance protocol is running over this port. 0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol … |
| 1.3.6.1.4.1.164.8.8.2.1.3 | pktSwchFrMaintModeS | 0 | 0 | This defines the mode of maintenance protocol running over this port. |
| 1.3.6.1.4.1.164.8.8.2.1.4 | pktSwchFrRxPoolRedLineS | 0 | 0 | When the number of empty receive buffers at the port reaches this figure (of frames),the port receiver is congested. This field… |
| 1.3.6.1.4.1.164.8.8.2.1.5 | pktSwchFrRxPoolOkS | 0 | 0 | Clear the receive congestion condition when the number of empty receive buffers at the port reaches this figure. This value (of … |
| 1.3.6.1.4.1.164.8.8.2.1.6 | pktSwchFrTxPoolRedLineS | 0 | 0 | When the number of frames awaiting transmission reaches this figure, the port transmitter is congested. This field value should… |
| 1.3.6.1.4.1.164.8.8.2.1.7 | pktSwchFrTxPoolOkS | 0 | 0 | Clear the transmit congestion condition when the number of frames awaiting transmission at the port reaches this figure. This v… |
| 1.3.6.1.4.1.164.8.8.2.1.8 | pktSwchFrTxCeilingS | 0 | 0 | The maximum allowable transmit pool for this port. |
| 1.3.6.1.4.1.164.8.8.2.1.9 | pktSwchFrInternalClockS | 0 | 0 | The baud rate of the internal clock. |
| 1.3.6.1.4.1.164.8.8.2.1.10 | pktSwchFrNrzModeS | 0 | 0 | The data encoding format. |
| 1.3.6.1.4.1.164.8.8.2.1.11 | pktSwchFrDlciHeaderModeS | 0 | 0 | Dlci Header length for this FR port. Option 4 means that there will be no management Dlci in the range of 1024 to 8388607. The ma… |
| 1.3.6.1.4.1.164.8.8.2.1.12 | pktSwchFrDcdLinkFailureS | 0 | 0 | Link Failure Detection by DCD. If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and c… |
| 1.3.6.1.4.1.164.8.8.2.1.14 | pktSwchFrOperationModeS | 0 | 0 | When H/W Control is configured, the SCC H/W will detect the change in the DCD or CTS signals and Start or Stop transmission auto… |
| 1.3.6.1.4.1.164.8.8.2.1.15 | pktSwchFrPhysInterfOptionsS | 0 | 0 | This is the physical interface. Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS… |