Indicated status and results of version
changing
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Indicated status and results of version changing.
upgrade-Start(1) upgrade starts
upgrade-Completed(2) upgrade completed
upgrade-Fail(3) upgrade failed
downgrade-Start(4) downgrade starts
downgrade-Completed(5) downgrade completed
downgrade-Fail(6) downgrade failed
upgrade-Fail-NoVersion(7)
upgrade failed, no version
upgrade-Fail-VersionControlInProgress(8)
upgrade failed, version control is in progress
downgrade-Fail-NoVersion(9)
downgrade failed, no version
downgrade-Fail-VersionControlInProgress(10)
downgrade failed, version control is in progress
upgrade-InProgress(11) upgrade is in progress
downgrade-InProgress(12)downgrade is in progress
upgrade-sanityCheck-InProgress(13)
upgrade sanity check is in progress
downgrade-sanityCheck-InProgress(14)
downgrade sanity check is in progress
upgrade-sanityCheck-Completed(15),
upgrade sanity check is completed
downgrade-sanityCheck-Completed(16),
downgrade sanity check is completed
upgrade-Fail-SanityCheckFail(17)
upgrade failed due to sanity check failure
downgrade-Fail-SanityCheckFail(18)
downgrade failed due to sanity check failure
upgrade-Fail-BkCPUFailedToRespond(19)
upgrade failed since backup CPU failed to respond
downgrade-Fail-BkCPUFailedToRespond(20)
downgrade failed since backup CPU failed to respond
upgrade-Fail-UserAbort(21)
upgrade failed since user aborted
downgrade-Fail-UserAbort(22)
downgrade failed since user aborted
synch-Start(23) synchronization starts
synch-InProgress(24) synchronization is in progress
synch-Completed(25) synchronization is completed
synch-Fail(26) synchronization failed
synch-Fail-NoBkCPU(27)
synchronization failed since no backup CPU
synch-Fail-SameVersion(28)
synchronization failed due to the same version
synch-Fail-FileCRCFailed(29)
synchronization failed due to file CRC failure
synch-Fail-VersionControlInProgress(30)
synchronization failed since version control
is in progress
synch-Fail-UserAbort(31)
synchronization failed since user aborted
synch-Fail-SanityCheckFail(32)
synchronization failed due to sanity
check failure
synch-Fail-BkCPUFailedToRespond(33)
synchronization failed since backup CPU
failed to respond
synch-sanityCheck-InProgress(34)
synchronization sanity check is in progress
synch-sanityCheck-Completed(35)
synchronization sanity check is completed
failedToAbort(36) failed to abort
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
versionConfigurationReasonCode OBJECT-TYPE SYNTAX INTEGER { upgrade-Start(1), upgrade-Completed(2), upgrade-Fail(3), downgrade-Start(4), downgrade-Completed(5), downgrade-Fail(6), upgrade-Fail-NoVersion(7), upgrade-Fail-VersionControlInProgress(8), downgrade-Fail-NoVersion(9), downgrade-Fail-VersionControlInProgress(10), upgrade-InProgress(11), downgrade-InProgress(12), upgrade-sanityCheck-InProgress(13), downgrade-sanityCheck-InProgress(14), upgrade-sanityCheck-Completed(15), downgrade-sanityCheck-Completed(16), upgrade-Fail-SanityCheckFail(17), downgrade-Fail-SanityCheckFail(18), upgrade-Fail-BkCPUFailedToRespond(19), downgrade-Fail-BkCPUFailedToRespond(20), upgrade-Fail-UserAbort(21), downgrade-Fail-UserAbort(22), synch-Start(23), synch-InProgress(24), synch-Completed(25), synch-Fail(26), synch-Fail-NoBkCPU(27), synch-Fail-SameVersion(28), synch-Fail-FileCRCFailed(29), synch-Fail-VersionControlInProgress(30), synch-Fail-UserAbort(31), synch-Fail-SanityCheckFail(32), synch-Fail-BkCPUFailedToRespond(33), synch-sanityCheck-InProgress(34), synch-sanityCheck-Completed(35), failedToAbort(36) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated status and results of version changing " ::= { returnCode 11 }
versionConfigurationReasonCode OBJECT-TYPE SYNTAX INTEGER { upgrade-Start(1), upgrade-Completed(2), upgrade-Fail(3), downgrade-Start(4), downgrade-Completed(5), downgrade-Fail(6), upgrade-Fail-NoVersion(7), upgrade-Fail-VersionControlInProgress(8), downgrade-Fail-NoVersion(9), downgrade-Fail-VersionControlInProgress(10), upgrade-InProgress(11), downgrade-InProgress(12), upgrade-sanityCheck-InProgress(13), downgrade-sanityCheck-InProgress(14), upgrade-sanityCheck-Completed(15), downgrade-sanityCheck-Completed(16), upgrade-Fail-SanityCheckFail(17), downgrade-Fail-SanityCheckFail(18), upgrade-Fail-BkCPUFailedToRespond(19), downgrade-Fail-BkCPUFailedToRespond(20), upgrade-Fail-UserAbort(21), downgrade-Fail-UserAbort(22), synch-Start(23), synch-InProgress(24), synch-Completed(25), synch-Fail(26), synch-Fail-NoBkCPU(27), synch-Fail-SameVersion(28), synch-Fail-FileCRCFailed(29), synch-Fail-VersionControlInProgress(30), synch-Fail-UserAbort(31), synch-Fail-SanityCheckFail(32), synch-Fail-BkCPUFailedToRespond(33), synch-sanityCheck-InProgress(34), synch-sanityCheck-Completed(35), failedToAbort(36) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated status and results of version changing. upgrade-Start(1) upgrade starts upgrade-Completed(2) upgrade completed upgrade-Fail(3) upgrade failed downgrade-Start(4) downgrade starts downgrade-Completed(5) downgrade completed downgrade-Fail(6) downgrade failed upgrade-Fail-NoVersion(7) upgrade failed, no version upgrade-Fail-VersionControlInProgress(8) upgrade failed, version control is in progress downgrade-Fail-NoVersion(9) downgrade failed, no version downgrade-Fail-VersionControlInProgress(10) downgrade failed, version control is in progress upgrade-InProgress(11) upgrade is in progress downgrade-InProgress(12)downgrade is in progress upgrade-sanityCheck-InProgress(13) upgrade sanity check is in progress downgrade-sanityCheck-InProgress(14) downgrade sanity check is in progress upgrade-sanityCheck-Completed(15), upgrade sanity check is completed downgrade-sanityCheck-Completed(16), downgrade sanity check is completed upgrade-Fail-SanityCheckFail(17) upgrade failed due to sanity check failure downgrade-Fail-SanityCheckFail(18) downgrade failed due to sanity check failure upgrade-Fail-BkCPUFailedToRespond(19) upgrade failed since backup CPU failed to respond downgrade-Fail-BkCPUFailedToRespond(20) downgrade failed since backup CPU failed to respond upgrade-Fail-UserAbort(21) upgrade failed since user aborted downgrade-Fail-UserAbort(22) downgrade failed since user aborted synch-Start(23) synchronization starts synch-InProgress(24) synchronization is in progress synch-Completed(25) synchronization is completed synch-Fail(26) synchronization failed synch-Fail-NoBkCPU(27) synchronization failed since no backup CPU synch-Fail-SameVersion(28) synchronization failed due to the same version synch-Fail-FileCRCFailed(29) synchronization failed due to file CRC failure synch-Fail-VersionControlInProgress(30) synchronization failed since version control is in progress synch-Fail-UserAbort(31) synchronization failed since user aborted synch-Fail-SanityCheckFail(32) synchronization failed due to sanity check failure synch-Fail-BkCPUFailedToRespond(33) synchronization failed since backup CPU failed to respond synch-sanityCheck-InProgress(34) synchronization sanity check is in progress synch-sanityCheck-Completed(35) synchronization sanity check is completed failedToAbort(36) failed to abort " ::= { returnCode 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.11.0 | versionConfigurationReasonCode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.1 | pvcFailureReasonCode | 1 | 1 | An identified reason why an ATM PVC connection request failed. |
| 1.3.6.1.4.1.1751.2.18.15.2 | interfaceIndex | 1 | 1 | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is th… |
| 1.3.6.1.4.1.1751.2.18.15.3 | interfaceType | 1 | 1 | Interface type used for identification in traps. A specific interface is associated with each number. |
| 1.3.6.1.4.1.1751.2.18.15.4 | interfaceFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the status of an interface. interfaceInService: Most, if not all, modifications r… |
| 1.3.6.1.4.1.1751.2.18.15.5 | powerSupplyReasonCode | 1 | 1 | Identification for change in status of a power supply. |
| 1.3.6.1.4.1.1751.2.18.15.6 | portId | 1 | 1 | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and… |
| 1.3.6.1.4.1.1751.2.18.15.7 | lineStatus | 1 | 1 | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | firmwareDownloadReasonCode | 1 | 1 | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | remoteRebootReasonCode | 1 | 1 | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | saveConfigurationReasonCode | 1 | 1 | The result of a save configuration request. |
| 1.3.6.1.4.1.1751.2.18.15.12 | percentComplete | 1 | 1 | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ipTypeReasonCode | 1 | 1 | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | timingReasonCode | 1 | 1 | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | alarmCardReasonCode | 1 | 1 | Configuration status of the alarm inputs and outputs. |
| 1.3.6.1.4.1.1751.2.18.15.16 | removeConfigFiles | 1 | 1 | Used to indicate the status of a remove configuration files request. |
| 1.3.6.1.4.1.1751.2.18.15.17 | spvcConfigFailureCode | 1 | 1 | Identification of cause for failure while configuring/modifying SPVC parameters. noSpvcConfigured : There endpoint has not been co… |
| 1.3.6.1.4.1.1751.2.18.15.18 | imaGrpChannelStatus | 1 | 1 | The return value for the imaGrpChannelFailNotify trap. startupFe cfgAbort configuartion parameters cfgAbortFe configuration paramete… |
| 1.3.6.1.4.1.1751.2.18.15.19 | atmImaIntfStatus | 1 | 1 | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the… |
| 1.3.6.1.4.1.1751.2.18.15.20 | deviceId | 1 | 1 | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | oamTestFailureReasonCode | 1 | 1 | An identified reason why an OAM Loopback Test request has failed. |
| 1.3.6.1.4.1.1751.2.18.15.22 | pnniCode | 1 | 1 | An identified reason for Miscellaneous Reasons in PNNI Configuration. |
| 1.3.6.1.4.1.1751.2.18.15.23 | swtchNodeIndx | 1 | 1 | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | oc3APSPairPortIndex | 1 | 1 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | oc3APSReasonCode | 1 | 1 | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | 1 | 1 | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | 1 | 1 | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | oc3APSSelectorState | 1 | 1 | W: active/standby P: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | oc3APSWorkingLineSignalStatus | 1 | 1 | Line Status of the working port sent in a trap |
| 1.3.6.1.4.1.1751.2.18.15.30 | oc3APSProtectionLineSignalStatus | 1 | 1 | Line Status of the protection port sent in a trap. |
| 1.3.6.1.4.1.1751.2.18.15.31 | arpStatus | 1 | 1 | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.32 | routingStatus | 1 | 1 | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.33 | vpnTrapStatus | 1 | 1 | Return codes for route server VPN level operations. |
| 1.3.6.1.4.1.1751.2.18.15.34 | ipIntfStatus | 1 | 1 | Return codes for route server IP interface operations. |
| 1.3.6.1.4.1.1751.2.18.15.35 | subChanStatus | 1 | 1 | Return codes for route server sub channel connections operations. |
| 1.3.6.1.4.1.1751.2.18.15.36 | routeSrvStatus | 1 | 1 | Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. |
| 1.3.6.1.4.1.1751.2.18.15.37 | apsFailureReasonCode | 1 | 1 | aps failure reason |
| 1.3.6.1.4.1.1751.2.18.15.38 | statRtStatus | 1 | 1 | Return codes for route server static route condititions. |
| 1.3.6.1.4.1.1751.2.18.15.39 | portFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the parameters of a port |
| 1.3.6.1.4.1.1751.2.18.15.40 | dlciNumber | 1 | 1 | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ipAddrNumber | 1 | 1 | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | pingStatusReasonCode | 1 | 1 | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.15.43 | primarySoftwareVersion | 1 | 1 | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | backupSoftwareVersion | 1 | 1 | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | oamActDeactResultCode | 1 | 1 | Various result codes for the operator's command for OAM Activation-Deactivation. |
| 1.3.6.1.4.1.1751.2.18.15.46 | tasCmprsAnnceReasonCode | 1 | 1 | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | tasTstLineReasonCode | 1 | 1 | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | 1 | 1 | gr303 PPS reason code |
| 1.3.6.1.4.1.1751.2.18.15.49 | gr303PPSSource | 1 | 1 | gr303 PPS source |
| 1.3.6.1.4.1.1751.2.18.15.50 | tasMemReasonCode | 1 | 1 | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | tasTrapTstId | 1 | 1 | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | tasTrapAnnceId | 1 | 1 | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | atmVpi | 1 | 1 | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | atmVci | 1 | 1 | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | iptResultCode | 1 | 1 | Various result codes for the operator's command forsetting/deleting interface protection group. |
| 1.3.6.1.4.1.1751.2.18.15.56 | pgtResultCode | 1 | 1 | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | tasmControlBlockAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | tasmCacheMemAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | atmTrunkingConfigFailureCode | 1 | 1 | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has… |
| 1.3.6.1.4.1.1751.2.18.15.60 | sapphireIntfAddressFailReasonCode | 1 | 1 | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment suc… |
| 1.3.6.1.4.1.1751.2.18.15.61 | chassisOverTempAlarmReasonCode | 1 | 1 | Indicator of presence of chassis over temperature alarm. |