An identified reason for Miscellaneous Reasons in PNNI Configuration.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
An identified reason for Miscellaneous Reasons in PNNI Configuration
pnniInvEndSysPortId(1) : Invalid EndSystem PortId.
pnniNodeAdmStatNotUp(2) : Admin Status of Node is not up.
pnniProtLnkStatDown(3) : Pnni Lnk status is down.
pnniProtLnkStatUpNotAdv(4) : Pnni Lnk status up but not advertised.
pnniProtLinkStatUpAdv(5) : Pnni Lnk status up and advertised.
pnniIntfAdmStatUp(6) : Pnni Intf Admin Status up.
pnniNodeNotCfg(7) : Pnni Node not configured in the switch.
pnniRtAddrAddedByIlmi(8) : Pnni Route added succesfully from ILMI.
pnniRtAddrDelByIlmi(9) : Pnni Route deleted succesfully from ILMI.
pnniLvlMismatchInNodeId(10) : Level mismatch in Node Id.
pnniLvlMismatchInPGId(11) : Level mismatch in Peer Group Id.
pnniATMAddrInvInNodeId(12) : ATM Address entered in Node Id invalid.
pnniATMAddrInvInPGId(13) : ATM Address entered in Peer Group Id invalid.
pnniIntfAdmStatNotDel(14) : Pnni Intf Admin Status Not deleted.
pnniNodeAdmStatUp(15) : Pnni Node Admin Status up.
pnniNodeRowStatNotActive(16) : Pnni Node Row Status not active - cannot
modify
pnniNewRtAddrAdded(17) : New route added into pnni route address table.
pnniRtAddrMod(18) : Route modified in pnni Address table.
pnniAdvtNodeIdNotMine(19) : Advertised NodeId does not belong to this psax.
pnniFeatureNotSupported(20) : pnni feature unsupported.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
pnniCode OBJECT-TYPE SYNTAX INTEGER { pnniInvEndSysPortId(1), pnniNodeAdmStatNotUp(2), pnniProtLnkStatDown(3), pnniProtLnkStatUpNotAdv(4), pnniProtLinkStatUpAdv(5), pnniIntfAdmStatUp(6), pnniNodeNotCfg(7), pnniRtAddrAddedByIlmi(8), pnniRtAddrDelByIlmi(9), pnniLvlMismatchInNodeId(10), pnniLvlMismatchInPGId(11), pnniATMAddrInvInNodeId(12), pnniATMAddrInvInPGId(13), pnniIntfAdmStatNotDel(14), pnniNodeAdmStatUp(15), pnniNodeRowStatNotActive(16), pnniNewRtAddrAdded(17), pnniRtAddrMod(18), pnniAdvtNodeIdNotMine(19), pnniFeatureNotSupported(20) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for Miscellaneous Reasons in PNNI Configuration." ::= { returnCode 22 }
pnniCode OBJECT-TYPE SYNTAX INTEGER { pnniInvEndSysPortId(1), pnniNodeAdmStatNotUp(2), pnniProtLnkStatDown(3), pnniProtLnkStatUpNotAdv(4), pnniProtLinkStatUpAdv(5), pnniIntfAdmStatUp(6), pnniNodeNotCfg(7), pnniRtAddrAddedByIlmi(8), pnniRtAddrDelByIlmi(9), pnniLvlMismatchInNodeId(10), pnniLvlMismatchInPGId(11), pnniATMAddrInvInNodeId(12), pnniATMAddrInvInPGId(13), pnniIntfAdmStatNotDel(14), pnniNodeAdmStatUp(15), pnniNodeRowStatNotActive(16), pnniNewRtAddrAdded(17), pnniRtAddrMod(18), pnniAdvtNodeIdNotMine(19), pnniFeatureNotSupported(20) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for Miscellaneous Reasons in PNNI Configuration pnniInvEndSysPortId(1) : Invalid EndSystem PortId. pnniNodeAdmStatNotUp(2) : Admin Status of Node is not up. pnniProtLnkStatDown(3) : Pnni Lnk status is down. pnniProtLnkStatUpNotAdv(4) : Pnni Lnk status up but not advertised. pnniProtLinkStatUpAdv(5) : Pnni Lnk status up and advertised. pnniIntfAdmStatUp(6) : Pnni Intf Admin Status up. pnniNodeNotCfg(7) : Pnni Node not configured in the switch. pnniRtAddrAddedByIlmi(8) : Pnni Route added succesfully from ILMI. pnniRtAddrDelByIlmi(9) : Pnni Route deleted succesfully from ILMI. pnniLvlMismatchInNodeId(10) : Level mismatch in Node Id. pnniLvlMismatchInPGId(11) : Level mismatch in Peer Group Id. pnniATMAddrInvInNodeId(12) : ATM Address entered in Node Id invalid. pnniATMAddrInvInPGId(13) : ATM Address entered in Peer Group Id invalid. pnniIntfAdmStatNotDel(14) : Pnni Intf Admin Status Not deleted. pnniNodeAdmStatUp(15) : Pnni Node Admin Status up. pnniNodeRowStatNotActive(16) : Pnni Node Row Status not active - cannot modify pnniNewRtAddrAdded(17) : New route added into pnni route address table. pnniRtAddrMod(18) : Route modified in pnni Address table. pnniAdvtNodeIdNotMine(19) : Advertised NodeId does not belong to this psax. pnniFeatureNotSupported(20) : pnni feature unsupported." ::= { returnCode 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.22.0 | pnniCode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.1 | pvcFailureReasonCode | 1 | 1 | An identified reason why an ATM PVC connection request failed. |
| 1.3.6.1.4.1.1751.2.18.15.2 | interfaceIndex | 1 | 1 | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is th… |
| 1.3.6.1.4.1.1751.2.18.15.3 | interfaceType | 1 | 1 | Interface type used for identification in traps. A specific interface is associated with each number. |
| 1.3.6.1.4.1.1751.2.18.15.4 | interfaceFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the status of an interface. interfaceInService: Most, if not all, modifications r… |
| 1.3.6.1.4.1.1751.2.18.15.5 | powerSupplyReasonCode | 1 | 1 | Identification for change in status of a power supply. |
| 1.3.6.1.4.1.1751.2.18.15.6 | portId | 1 | 1 | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and… |
| 1.3.6.1.4.1.1751.2.18.15.7 | lineStatus | 1 | 1 | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | firmwareDownloadReasonCode | 1 | 1 | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | remoteRebootReasonCode | 1 | 1 | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | saveConfigurationReasonCode | 1 | 1 | The result of a save configuration request. |
| 1.3.6.1.4.1.1751.2.18.15.11 | versionConfigurationReasonCode | 1 | 1 | Indicated status and results of version changing |
| 1.3.6.1.4.1.1751.2.18.15.12 | percentComplete | 1 | 1 | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ipTypeReasonCode | 1 | 1 | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | timingReasonCode | 1 | 1 | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | alarmCardReasonCode | 1 | 1 | Configuration status of the alarm inputs and outputs. |
| 1.3.6.1.4.1.1751.2.18.15.16 | removeConfigFiles | 1 | 1 | Used to indicate the status of a remove configuration files request. |
| 1.3.6.1.4.1.1751.2.18.15.17 | spvcConfigFailureCode | 1 | 1 | Identification of cause for failure while configuring/modifying SPVC parameters. noSpvcConfigured : There endpoint has not been co… |
| 1.3.6.1.4.1.1751.2.18.15.18 | imaGrpChannelStatus | 1 | 1 | The return value for the imaGrpChannelFailNotify trap. startupFe cfgAbort configuartion parameters cfgAbortFe configuration paramete… |
| 1.3.6.1.4.1.1751.2.18.15.19 | atmImaIntfStatus | 1 | 1 | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the… |
| 1.3.6.1.4.1.1751.2.18.15.20 | deviceId | 1 | 1 | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | oamTestFailureReasonCode | 1 | 1 | An identified reason why an OAM Loopback Test request has failed. |
| 1.3.6.1.4.1.1751.2.18.15.23 | swtchNodeIndx | 1 | 1 | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | oc3APSPairPortIndex | 1 | 1 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | oc3APSReasonCode | 1 | 1 | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | 1 | 1 | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | 1 | 1 | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | oc3APSSelectorState | 1 | 1 | W: active/standby P: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | oc3APSWorkingLineSignalStatus | 1 | 1 | Line Status of the working port sent in a trap |
| 1.3.6.1.4.1.1751.2.18.15.30 | oc3APSProtectionLineSignalStatus | 1 | 1 | Line Status of the protection port sent in a trap. |
| 1.3.6.1.4.1.1751.2.18.15.31 | arpStatus | 1 | 1 | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.32 | routingStatus | 1 | 1 | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.33 | vpnTrapStatus | 1 | 1 | Return codes for route server VPN level operations. |
| 1.3.6.1.4.1.1751.2.18.15.34 | ipIntfStatus | 1 | 1 | Return codes for route server IP interface operations. |
| 1.3.6.1.4.1.1751.2.18.15.35 | subChanStatus | 1 | 1 | Return codes for route server sub channel connections operations. |
| 1.3.6.1.4.1.1751.2.18.15.36 | routeSrvStatus | 1 | 1 | Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. |
| 1.3.6.1.4.1.1751.2.18.15.37 | apsFailureReasonCode | 1 | 1 | aps failure reason |
| 1.3.6.1.4.1.1751.2.18.15.38 | statRtStatus | 1 | 1 | Return codes for route server static route condititions. |
| 1.3.6.1.4.1.1751.2.18.15.39 | portFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the parameters of a port |
| 1.3.6.1.4.1.1751.2.18.15.40 | dlciNumber | 1 | 1 | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ipAddrNumber | 1 | 1 | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | pingStatusReasonCode | 1 | 1 | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.15.43 | primarySoftwareVersion | 1 | 1 | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | backupSoftwareVersion | 1 | 1 | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | oamActDeactResultCode | 1 | 1 | Various result codes for the operator's command for OAM Activation-Deactivation. |
| 1.3.6.1.4.1.1751.2.18.15.46 | tasCmprsAnnceReasonCode | 1 | 1 | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | tasTstLineReasonCode | 1 | 1 | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | 1 | 1 | gr303 PPS reason code |
| 1.3.6.1.4.1.1751.2.18.15.49 | gr303PPSSource | 1 | 1 | gr303 PPS source |
| 1.3.6.1.4.1.1751.2.18.15.50 | tasMemReasonCode | 1 | 1 | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | tasTrapTstId | 1 | 1 | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | tasTrapAnnceId | 1 | 1 | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | atmVpi | 1 | 1 | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | atmVci | 1 | 1 | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | iptResultCode | 1 | 1 | Various result codes for the operator's command forsetting/deleting interface protection group. |
| 1.3.6.1.4.1.1751.2.18.15.56 | pgtResultCode | 1 | 1 | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | tasmControlBlockAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | tasmCacheMemAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | atmTrunkingConfigFailureCode | 1 | 1 | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has… |
| 1.3.6.1.4.1.1751.2.18.15.60 | sapphireIntfAddressFailReasonCode | 1 | 1 | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment suc… |
| 1.3.6.1.4.1.1751.2.18.15.61 | chassisOverTempAlarmReasonCode | 1 | 1 | Indicator of presence of chassis over temperature alarm. |