Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours
Parsed from file dls.mib.txt
Company: None
Module: Wellfleet-DLS-MIB
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours
Parsed from file Wellfleet-DLS-MIB.mib
Module: Wellfleet-DLS-MIB
Vendor: Wellfleet
Module: Wellfleet-DLS-MIB
[Automatically extracted from oidview.com]
wfDlsNonPeakOutBandwidth OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours" DEFVAL { 0 } ::= { wfDls 42 }
wfDlsNonPeakOutBandwidth OBJECT-TYPE SYNTAX INTEGER(0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours" DEFVAL { 0 } ::= { wfDls 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.5.1.42.0 | wfDlsNonPeakOutBandwidth | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.5.1.1 | wfDlsDelete | 1 | 1 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.2 | wfDlsDisable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.3 | wfDlsState | 1 | 1 | The current state of DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.4 | wfDlsTcpWindowSize | 1 | 1 | The size in bytes of the windows used for the DLSw TCP connections |
| 1.3.6.1.4.1.18.3.5.1.5.1.5 | wfDlsVirtualRing | 1 | 1 | The virtual ring number for the TCP/IP cloud. Valid values (1-4095) |
| 1.3.6.1.4.1.18.3.5.1.5.1.6 | wfDlsInternalLanId | 1 | 1 | The source routing internal lan id. Valid Values (1-4095) |
| 1.3.6.1.4.1.18.3.5.1.5.1.7 | wfDlsBridgeId | 1 | 1 | The source routing base bridge number. Valid Values (1-15) |
| 1.3.6.1.4.1.18.3.5.1.5.1.8 | wfDlsMaxSlotSessions | 1 | 1 | The maximum number of LLC2 sessions to support per slot |
| 1.3.6.1.4.1.18.3.5.1.5.1.9 | wfDlsTotalCircuits | 1 | 1 | A current count of the total number of DLSw circuits established |
| 1.3.6.1.4.1.18.3.5.1.5.1.10 | wfDlsVirtualRingMtu | 1 | 1 | The MTU to use in explorers generated by this DLSw. It should reflect the minimum MTU size of the entire network including the r… |
| 1.3.6.1.4.1.18.3.5.1.5.1.11 | wfDlsMacAgeTime | 1 | 1 | The time in seconds before inactive MAC addresses will be aged out of the cache. Valid values (> 20) |
| 1.3.6.1.4.1.18.3.5.1.5.1.12 | wfDlsNbAgeTime | 1 | 1 | The time in seconds before inactive NetBIOS names will be aged out of the cache. Valid values (> 20) |
| 1.3.6.1.4.1.18.3.5.1.5.1.13 | wfDlsUnconfPeerReject | 1 | 1 | Allow establishment of TCP connections from peers not in the Peer Table |
| 1.3.6.1.4.1.18.3.5.1.5.1.14 | wfDlsDebugLevel1 | 1 | 1 | First Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logged… |
| 1.3.6.1.4.1.18.3.5.1.5.1.15 | wfDlsDebugLevel2 | 1 | 1 | Second Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logge… |
| 1.3.6.1.4.1.18.3.5.1.5.1.16 | wfDlsWanKeepaliveTime | 1 | 1 | Keepalive packets will be sent into inactive, established TCP connections after this time interval (in seconds). A time of zero… |
| 1.3.6.1.4.1.18.3.5.1.5.1.17 | wfDlsPPriDisable | 1 | 1 | Protocol Prioritization Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation to enable/disable thi… |
| 1.3.6.1.4.1.18.3.5.1.5.1.18 | wfDlsPPriDefaultNumQueues | 1 | 1 | DLSw Prioritization Default number of Queues. The number of queues to be created when establishing a Peer connection if none hav… |
| 1.3.6.1.4.1.18.3.5.1.5.1.19 | wfDlsPPriDefaultQBandwidth | 1 | 1 | DLSw Prioritization Default Queues Bandwidth. The bandwidth for each default queue. Default of: 60% queue 0, 40% queue 1 via si… |
| 1.3.6.1.4.1.18.3.5.1.5.1.20 | wfDlsPPriUnconfPeerDisable | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.21 | wfDlsPPriUnconfPeerMaxQBuf | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.22 | wfDlsPPriUnconfPeerMaxQSize | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| 1.3.6.1.4.1.18.3.5.1.5.1.23 | wfDlsPkgMaxSize | 1 | 1 | Maximum size of frame to sended over the WAN. Used when packaging multiple DLS frames into a single TCP frame. The value specifi… |
| 1.3.6.1.4.1.18.3.5.1.5.1.24 | wfDlsPkgTO | 1 | 1 | DLSw packaging Time-out. Number of msec to delay a package before sending to TCP. This value should be based on the WAN speed w… |
| 1.3.6.1.4.1.18.3.5.1.5.1.25 | wfDlsPkgWinPercent | 1 | 1 | DLSw Packaging threshold. What percent of the DLS TCP window must be outstanding inorder to delay the sending of a package being… |
| 1.3.6.1.4.1.18.3.5.1.5.1.26 | wfDlsMultislotBcasts | 1 | 1 | Allow broadcasts inbound from the WAN to be broadcast to all active DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.27 | wfDlsInitialPacingWindow | 1 | 1 | Initial pacing window to be advertised in Capabilities Exchange messages. Adaptive pacing will begin with this value and use the… |
| 1.3.6.1.4.1.18.3.5.1.5.1.28 | wfDlsRfc | 1 | 1 | DLSw RFC mode selection. - RFC1434 is the original implementation - RFC1795 provides improved interoperability and flow control - … |
| 1.3.6.1.4.1.18.3.5.1.5.1.29 | wfDlsNetbiosSessionAliveFilter | 1 | 1 | Netbios session alive filter. |
| 1.3.6.1.4.1.18.3.5.1.5.1.30 | wfDlsWanKeepaliveRetryTimer | 1 | 1 | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retrans… |
| 1.3.6.1.4.1.18.3.5.1.5.1.31 | wfDlsWanKeepaliveRetries | 1 | 1 | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, on… |
| 1.3.6.1.4.1.18.3.5.1.5.1.32 | wfDlsSnaFallbackAttempts | 1 | 1 | Number of times CANUREACH_ex will be sent (for SNA based connections) before attempting to fall back. Used for peers configured a… |
| 1.3.6.1.4.1.18.3.5.1.5.1.33 | wfDlsNetbiosFallbackTime | 1 | 1 | Amount of time in sec before falling back to RFC 1795 for the peers configured with wfDlsPeerTransportType = unknown, if NETBIOS_… |
| 1.3.6.1.4.1.18.3.5.1.5.1.34 | wfDlsTcpInactTime | 1 | 1 | Amount of time in sec after the last active DLSw circuit has terminated or there was no data transfered over TCP pipe, before bri… |
| 1.3.6.1.4.1.18.3.5.1.5.1.35 | wfDlsTcpInactMethod | 1 | 1 | Determines when tcp connections may be brought down. Could be due to no DLS circuits on a peer, no data passing over the TCP link… |
| 1.3.6.1.4.1.18.3.5.1.5.1.36 | wfDlsMslotDLCBcasts | 1 | 1 | Allow broadcast messages inbound from the DLC to be sent to all active DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.37 | wfDlsRsvpSupport | 1 | 1 | Enables/Disables use of RSVP by DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.38 | wfDlsOutBandwidth | 1 | 1 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.39 | wfDlsOutBurstSize | 1 | 1 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.40 | wfDlsInBandwidth | 1 | 1 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.41 | wfDlsInBurstSize | 1 | 1 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
| 1.3.6.1.4.1.18.3.5.1.5.1.43 | wfDlsNonPeakOutBurstSize | 1 | 1 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.44 | wfDlsNonPeakInBandwidth | 1 | 1 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.45 | wfDlsNonPeakInBurstSize | 1 | 1 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
| 1.3.6.1.4.1.18.3.5.1.5.1.46 | wfDlsNonPeakStartTime | 1 | 1 | Start time of the non-peak hours in hhmm format and 24 hour clock. If start time is greater in value than end time, non-peak hour… |
| 1.3.6.1.4.1.18.3.5.1.5.1.47 | wfDlsNonPeakEndTime | 1 | 1 | End time of the non-peak hours in hhmm 24 hour clock format |
| 1.3.6.1.4.1.18.3.5.1.5.1.48 | wfDlsNonPeakStartDays | 1 | 1 | Bitmap of the starting days of the week for a non-peak reservations. The MSBit represents Sunday, the next most significant bit re… |
| 1.3.6.1.4.1.18.3.5.1.5.1.49 | wfDlsMultislotCacheUpdate | 1 | 1 | Allow learned MAC-IP cache resolutions to be promulgated to all other DLSw slots. |
| 1.3.6.1.4.1.18.3.5.1.5.1.50 | wfDlsMacAddrTranslation | 1 | 1 | Enables/Disables use of Mac Address Translation by DLSw |
| 1.3.6.1.4.1.18.3.5.1.5.1.51 | wfDlsBan2Support | 1 | 1 | Enables/Disables BAN-2 local termination between SRB interfaces in single DLS switch configs |
| 1.3.6.1.4.1.18.3.5.1.5.1.52 | wfDlsVirtualRingBridgeCheck | 1 | 1 | DLSw Virtual Ring ID and SRB Bridge ID will be checked. |
| 1.3.6.1.4.1.18.3.5.1.5.1.53 | wfDlsAcceptBadVendorSpecificCapex | 1 | 1 | Accept a capex request containing a Vendor Specific Control Vector but no Vendor Context. The Control Vector will be ignored |
| 1.3.6.1.4.1.18.3.5.1.5.1.54 | wfDlsDiagSwitch | 1 | 1 | Available MIB for diagnostic workspaces. Allows optional conditional debugging |
| 1.3.6.1.4.1.18.3.5.1.5.1.55 | wfDlsAllowSpecAddrNbDatagram | 1 | 1 | Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group address as the destination MAC address. This is an o… |
| 1.3.6.1.4.1.18.3.5.1.5.1.56 | wfDlsLLCConnectTime | 1 | 1 | This is the interval allowed for a connection to be established. It is strongly recommended that this never be changed from the d… |