Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group
address as the destination MAC address. This is an override MIB. When enabled,
DLS will bypass its check for that group address and allow the packet.
Parsed from file dls.mib.txt
Company: None
Module: Wellfleet-DLS-MIB
Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group
address as the destination MAC address. This is an override MIB. When enabled,
DLS will bypass its check for that group address and allow the packet.
Parsed from file Wellfleet-DLS-MIB.mib
Module: Wellfleet-DLS-MIB
Vendor: Wellfleet
Module: Wellfleet-DLS-MIB
[Automatically extracted from oidview.com]
wfDlsAllowSpecAddrNbDatagram OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group address as the destination MAC address. This is an override MIB. When enabled, DLS will bypass its check for that group address and allow the packet." DEFVAL { disabled } ::= { wfDls 55 }
wfDlsAllowSpecAddrNbDatagram OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows acceptance of NETBIOS Datagrams sent to other than the NETBIOS Group address as the destination MAC address. This is an override MIB. When enabled, DLS will bypass its check for that group address and allow the packet." DEFVAL { disabled } ::= { wfDls 55 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.1.5.1.55.0 | wfDlsAllowSpecAddrNbDatagram | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.1.5.1.1 | wfDlsDelete | 1 | 1 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete DLSw |
1.3.6.1.4.1.18.3.5.1.5.1.2 | wfDlsDisable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable DLSw |
1.3.6.1.4.1.18.3.5.1.5.1.3 | wfDlsState | 1 | 1 | The current state of DLSw |
1.3.6.1.4.1.18.3.5.1.5.1.4 | wfDlsTcpWindowSize | 1 | 1 | The size in bytes of the windows used for the DLSw TCP connections |
1.3.6.1.4.1.18.3.5.1.5.1.5 | wfDlsVirtualRing | 1 | 1 | The virtual ring number for the TCP/IP cloud. Valid values (1-4095) |
1.3.6.1.4.1.18.3.5.1.5.1.6 | wfDlsInternalLanId | 1 | 1 | The source routing internal lan id. Valid Values (1-4095) |
1.3.6.1.4.1.18.3.5.1.5.1.7 | wfDlsBridgeId | 1 | 1 | The source routing base bridge number. Valid Values (1-15) |
1.3.6.1.4.1.18.3.5.1.5.1.8 | wfDlsMaxSlotSessions | 1 | 1 | The maximum number of LLC2 sessions to support per slot |
1.3.6.1.4.1.18.3.5.1.5.1.9 | wfDlsTotalCircuits | 1 | 1 | A current count of the total number of DLSw circuits established |
1.3.6.1.4.1.18.3.5.1.5.1.10 | wfDlsVirtualRingMtu | 1 | 1 | The MTU to use in explorers generated by this DLSw. It should reflect the minimum MTU size of the entire network including the r… |
1.3.6.1.4.1.18.3.5.1.5.1.11 | wfDlsMacAgeTime | 1 | 1 | The time in seconds before inactive MAC addresses will be aged out of the cache. Valid values (> 20) |
1.3.6.1.4.1.18.3.5.1.5.1.12 | wfDlsNbAgeTime | 1 | 1 | The time in seconds before inactive NetBIOS names will be aged out of the cache. Valid values (> 20) |
1.3.6.1.4.1.18.3.5.1.5.1.13 | wfDlsUnconfPeerReject | 1 | 1 | Allow establishment of TCP connections from peers not in the Peer Table |
1.3.6.1.4.1.18.3.5.1.5.1.14 | wfDlsDebugLevel1 | 1 | 1 | First Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logged… |
1.3.6.1.4.1.18.3.5.1.5.1.15 | wfDlsDebugLevel2 | 1 | 1 | Second Level debug flag. Cannot be configured with Site Manager. When this flag is set to Zero, no debug messages will be logge… |
1.3.6.1.4.1.18.3.5.1.5.1.16 | wfDlsWanKeepaliveTime | 1 | 1 | Keepalive packets will be sent into inactive, established TCP connections after this time interval (in seconds). A time of zero… |
1.3.6.1.4.1.18.3.5.1.5.1.17 | wfDlsPPriDisable | 1 | 1 | Protocol Prioritization Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation to enable/disable thi… |
1.3.6.1.4.1.18.3.5.1.5.1.18 | wfDlsPPriDefaultNumQueues | 1 | 1 | DLSw Prioritization Default number of Queues. The number of queues to be created when establishing a Peer connection if none hav… |
1.3.6.1.4.1.18.3.5.1.5.1.19 | wfDlsPPriDefaultQBandwidth | 1 | 1 | DLSw Prioritization Default Queues Bandwidth. The bandwidth for each default queue. Default of: 60% queue 0, 40% queue 1 via si… |
1.3.6.1.4.1.18.3.5.1.5.1.20 | wfDlsPPriUnconfPeerDisable | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
1.3.6.1.4.1.18.3.5.1.5.1.21 | wfDlsPPriUnconfPeerMaxQBuf | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
1.3.6.1.4.1.18.3.5.1.5.1.22 | wfDlsPPriUnconfPeerMaxQSize | 1 | 1 | DLSw Prioritization enabled/disabled for peers not in Peer Table. |
1.3.6.1.4.1.18.3.5.1.5.1.23 | wfDlsPkgMaxSize | 1 | 1 | Maximum size of frame to sended over the WAN. Used when packaging multiple DLS frames into a single TCP frame. The value specifi… |
1.3.6.1.4.1.18.3.5.1.5.1.24 | wfDlsPkgTO | 1 | 1 | DLSw packaging Time-out. Number of msec to delay a package before sending to TCP. This value should be based on the WAN speed w… |
1.3.6.1.4.1.18.3.5.1.5.1.25 | wfDlsPkgWinPercent | 1 | 1 | DLSw Packaging threshold. What percent of the DLS TCP window must be outstanding inorder to delay the sending of a package being… |
1.3.6.1.4.1.18.3.5.1.5.1.26 | wfDlsMultislotBcasts | 1 | 1 | Allow broadcasts inbound from the WAN to be broadcast to all active DLSw slots. |
1.3.6.1.4.1.18.3.5.1.5.1.27 | wfDlsInitialPacingWindow | 1 | 1 | Initial pacing window to be advertised in Capabilities Exchange messages. Adaptive pacing will begin with this value and use the… |
1.3.6.1.4.1.18.3.5.1.5.1.28 | wfDlsRfc | 1 | 1 | DLSw RFC mode selection. - RFC1434 is the original implementation - RFC1795 provides improved interoperability and flow control - … |
1.3.6.1.4.1.18.3.5.1.5.1.29 | wfDlsNetbiosSessionAliveFilter | 1 | 1 | Netbios session alive filter. |
1.3.6.1.4.1.18.3.5.1.5.1.30 | wfDlsWanKeepaliveRetryTimer | 1 | 1 | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retrans… |
1.3.6.1.4.1.18.3.5.1.5.1.31 | wfDlsWanKeepaliveRetries | 1 | 1 | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, on… |
1.3.6.1.4.1.18.3.5.1.5.1.32 | wfDlsSnaFallbackAttempts | 1 | 1 | Number of times CANUREACH_ex will be sent (for SNA based connections) before attempting to fall back. Used for peers configured a… |
1.3.6.1.4.1.18.3.5.1.5.1.33 | wfDlsNetbiosFallbackTime | 1 | 1 | Amount of time in sec before falling back to RFC 1795 for the peers configured with wfDlsPeerTransportType = unknown, if NETBIOS_… |
1.3.6.1.4.1.18.3.5.1.5.1.34 | wfDlsTcpInactTime | 1 | 1 | Amount of time in sec after the last active DLSw circuit has terminated or there was no data transfered over TCP pipe, before bri… |
1.3.6.1.4.1.18.3.5.1.5.1.35 | wfDlsTcpInactMethod | 1 | 1 | Determines when tcp connections may be brought down. Could be due to no DLS circuits on a peer, no data passing over the TCP link… |
1.3.6.1.4.1.18.3.5.1.5.1.36 | wfDlsMslotDLCBcasts | 1 | 1 | Allow broadcast messages inbound from the DLC to be sent to all active DLSw slots. |
1.3.6.1.4.1.18.3.5.1.5.1.37 | wfDlsRsvpSupport | 1 | 1 | Enables/Disables use of RSVP by DLSw |
1.3.6.1.4.1.18.3.5.1.5.1.38 | wfDlsOutBandwidth | 1 | 1 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
1.3.6.1.4.1.18.3.5.1.5.1.39 | wfDlsOutBurstSize | 1 | 1 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers |
1.3.6.1.4.1.18.3.5.1.5.1.40 | wfDlsInBandwidth | 1 | 1 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
1.3.6.1.4.1.18.3.5.1.5.1.41 | wfDlsInBurstSize | 1 | 1 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers |
1.3.6.1.4.1.18.3.5.1.5.1.42 | wfDlsNonPeakOutBandwidth | 1 | 1 | Bandwidth amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
1.3.6.1.4.1.18.3.5.1.5.1.43 | wfDlsNonPeakOutBurstSize | 1 | 1 | Burst Size amount for the outgoing DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
1.3.6.1.4.1.18.3.5.1.5.1.44 | wfDlsNonPeakInBandwidth | 1 | 1 | Bandwidth amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
1.3.6.1.4.1.18.3.5.1.5.1.45 | wfDlsNonPeakInBurstSize | 1 | 1 | Burst Size amount for the incoming DLSw traffic, to use in RSVP reservations for unconfigured peers during non-peak hours |
1.3.6.1.4.1.18.3.5.1.5.1.46 | wfDlsNonPeakStartTime | 1 | 1 | Start time of the non-peak hours in hhmm format and 24 hour clock. If start time is greater in value than end time, non-peak hour… |
1.3.6.1.4.1.18.3.5.1.5.1.47 | wfDlsNonPeakEndTime | 1 | 1 | End time of the non-peak hours in hhmm 24 hour clock format |
1.3.6.1.4.1.18.3.5.1.5.1.48 | wfDlsNonPeakStartDays | 1 | 1 | Bitmap of the starting days of the week for a non-peak reservations. The MSBit represents Sunday, the next most significant bit re… |
1.3.6.1.4.1.18.3.5.1.5.1.49 | wfDlsMultislotCacheUpdate | 1 | 1 | Allow learned MAC-IP cache resolutions to be promulgated to all other DLSw slots. |
1.3.6.1.4.1.18.3.5.1.5.1.50 | wfDlsMacAddrTranslation | 1 | 1 | Enables/Disables use of Mac Address Translation by DLSw |
1.3.6.1.4.1.18.3.5.1.5.1.51 | wfDlsBan2Support | 1 | 1 | Enables/Disables BAN-2 local termination between SRB interfaces in single DLS switch configs |
1.3.6.1.4.1.18.3.5.1.5.1.52 | wfDlsVirtualRingBridgeCheck | 1 | 1 | DLSw Virtual Ring ID and SRB Bridge ID will be checked. |
1.3.6.1.4.1.18.3.5.1.5.1.53 | wfDlsAcceptBadVendorSpecificCapex | 1 | 1 | Accept a capex request containing a Vendor Specific Control Vector but no Vendor Context. The Control Vector will be ignored |
1.3.6.1.4.1.18.3.5.1.5.1.54 | wfDlsDiagSwitch | 1 | 1 | Available MIB for diagnostic workspaces. Allows optional conditional debugging |
1.3.6.1.4.1.18.3.5.1.5.1.56 | wfDlsLLCConnectTime | 1 | 1 | This is the interval allowed for a connection to be established. It is strongly recommended that this never be changed from the d… |