A description of an IGMP interface
Parsed from file igmp.mib.txt
Company: None
Module: Wellfleet-IGMP-MIB
A description of an IGMP interface
Parsed from file Wellfleet-IGMP-MIB.mib
Module: Wellfleet-IGMP-MIB
Vendor: Wellfleet
Module: Wellfleet-IGMP-MIB
[Automatically extracted from oidview.com]
wfIgmpIfEntry OBJECT-TYPE SYNTAX WfIgmpIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of an IGMP interface" INDEX { wfIgmpIfCctno } ::= { wfIgmpIfTable 1 }
wfIgmpIfEntry OBJECT-TYPE SYNTAX WfIgmpIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of an IGMP interface" INDEX { wfIgmpIfCctno } ::= { wfIgmpIfTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.13.2.1.1 | wfIgmpIfCreate | 0 | 0 | Indicates whether this IGMP If record is to be deleted or created |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.2 | wfIgmpIfEnable | 0 | 0 | Indicates whether this IGMP intf record is to be enabled or disabled |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.3 | wfIgmpIfState | 0 | 0 | The current state of the IGMP interface. Invalid indicates an error in processing the cfg record |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.4 | wfIgmpDesignatedRouter | 0 | 0 | The current Igmp Designated Router. If there are multipule routers on a multi-access network, this is the router sending the igmp… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.5 | wfIgmpIfQueryRate | 0 | 0 | Query rate. This value specifies, in seconds, how often a local group membership is queried. If set to 0, no queries will be se… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.6 | wfIgmpIfMembershipTimeout | 0 | 0 | Membership timeout. This value specifies, in seconds, the amount of time that a local group membership is valid without confirma… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.7 | wfIgmpIfDRTimeout | 0 | 0 | Designated Router Timeout. This value specifies, in seconds, the amount of time from the last host query message that will be us… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.8 | wfIgmpIfLocalIpAddress | 0 | 0 | IP Address currently in use on this circuit. This is the IP address that being used to generate and multicast traffic |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.9 | wfIgmpIfCctno | 0 | 0 | The Circuit IGMP should be running on |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.10 | wfIgmpIfInDatagrams | 0 | 0 | The total number of IGMP datagrams received on the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.11 | wfIgmpIfOutQueries | 0 | 0 | The number of Host Membership Query messages sent out of this interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.12 | wfIgmpIfInQueries | 0 | 0 | The number of Host Membership Query messages that have been received on this interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.13 | wfIgmpIfDiscards | 0 | 0 | The number of IGMP messages received on this interface that were discarded due to bad checksums, illegal message types, bad value… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.14 | wfIgmpIfNetVersion | 0 | 0 | This is the version of igmp that this router believes is running on this network. A value of 1 means IGMPv1 (old igmp) and a valu… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.15 | wfIgmpIfMaxHostResponse | 0 | 0 | This is the amount of time in 10th of seconds that a host is supposed to take to respond to a query. This will value will be plac… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.16 | wfIgmpIfRoutingProtocol | 0 | 0 | This has the value of the multicast protocol running on this interface. A value 'igmp' means there is no multicast protocol up o… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.17 | wfIgmpIfDroppedDataPkt | 0 | 0 | Number of data packets that have to be dropped on this outgoing interface due to lack of buffers. If alias flooding is used for s… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.18 | wfIgmpIfMtraceEntryLifetime | 0 | 0 | This is the amount of time in seconds that a router is supposed to keep a forwarding cache entry that was created specifically fo… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.19 | wfIgmpIfInMtraceReqs | 0 | 0 | The total number of Mtrace packets received on the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.20 | wfIgmpIfOutMtraceReqs | 0 | 0 | The total number of Mtrace packets send from the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.21 | wfIgmpIfInMtraceResps | 0 | 0 | The total number of Mtrace packets received on the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.22 | wfIgmpIfOutMtraceResps | 0 | 0 | The total number of Mtrace packets send from the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.23 | wfIgmpIfRelayType | 0 | 0 | Indicates whether the IGMP circuit is configured as the primary upstream circuit, the backup upstream circuit or a downstream cir… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.24 | wfIgmpIfUnsolicitedReportInterval | 0 | 0 | This mib attribute is the Unsolicited Report Interval, in seconds, which is the time between repetitions of a host's initial repo… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.25 | wfIgmpIfSuppressQuery | 0 | 0 | Whether IGMP query is suppressed on this interface. In Bay's multicast implementation, configuring 'IGMP' on an interface means t… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.26 | wfIgmpIfGroupCount | 0 | 0 | The total number of groups presented on the interface. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.27 | wfIgmpIfVRRPTriggerState | 0 | 0 | Indicates whether VRRP subsystem wants this IGMP Intf to be enabled or disabled. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.28 | wfIgmpIfStaticFwdCacheLifeTime | 0 | 0 | If the IGMPStaticForwarding Policy mode is set to static to dynamic (static inbound and multicast protcol outbound) mode. This va… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.29 | wfIgmpIfRobustnessVariable | 0 | 0 | This variable allows tuning for the expected packet loss on a network. IGMP is robust to (RobustnessVariable - 1) packet losses. … |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.30 | wfIgmpIfStartupQueryInterval | 0 | 0 | The interval between General Queries sent by a Querier on startup. |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.31 | wfIgmpIfStartupQueryCount | 0 | 0 | The number of Queries sent out on startup, separated by the Startup Query Interval. The suggested range of value is 1 ~ 8 |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.32 | wfIgmpIfLastMemberQueryInterval | 0 | 0 | The Max Response Time used to calculate the Max Resp Code inserted into Group-Specific Queries sent in response to Leave Group me… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.33 | wfIgmpIfLastMemberQueryCount | 0 | 0 | The number of Group-Specific Queries sent before the router assumes there are no local members. It is also the number of Group-an… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.34 | wfIgmpIfLastMemberQueryTime | 0 | 0 | The time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. Default is (2 * 10 / 10 … |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.35 | wfIgmpIfOlderHostPresentInterval | 0 | 0 | The time-out for transitioning a group back to IGMPv3 mode once an older version report is sent for that group. When an older ver… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.36 | wfIgmpIfOlderQueryReceived | 0 | 0 | The number of queries received on this interface that is not in the same version as wfIgmpIfNetVersion. This may be an older one … |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.37 | wfIgmpIfOlderHostMsgReceived | 0 | 0 | The number of member report/leave received on this interface that is not in the same version wfIgmpIfNetVersion. This may be an o… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.38 | wfIgmpIfMemberTimeout | 0 | 0 | Membership timeout. This value specifies, in seconds, the amount of time that a local group membership is valid without confirmat… |
| 1.3.6.1.4.1.18.3.5.3.13.2.1.39 | wfIgmpIfQuerierTimeout | 0 | 0 | Querier Router Timeout. This value specifies, in seconds, the amount of time from the last host query message that will be used t… |