Designated Router Timeout. This value specifies, in seconds, the
amount of time from the last host query message that will be used
to determine the loss of the IGMP designated router.
Parsed from file igmp.mib.txt
Company: None
Module: Wellfleet-IGMP-MIB
Designated Router Timeout. This value specifies, in seconds, the
amount of time from the last host query message that will be used
to determine the loss of the IGMP designated router.
Parsed from file Wellfleet-IGMP-MIB.mib
Module: Wellfleet-IGMP-MIB
Vendor: Wellfleet
Module: Wellfleet-IGMP-MIB
[Automatically extracted from oidview.com]
wfIgmpIfDRTimeout OBJECT-TYPE SYNTAX INTEGER(10..8192) ACCESS read-write STATUS mandatory DESCRIPTION "Designated Router Timeout. This value specifies, in seconds, the amount of time from the last host query message that will be used to determine the loss of the IGMP designated router. " DEFVAL { 140 } ::= { wfIgmpIfEntry 7 }
wfIgmpIfDRTimeout OBJECT-TYPE SYNTAX INTEGER(10..8192) ACCESS read-write STATUS mandatory DESCRIPTION "Designated Router Timeout. This value specifies, in seconds, the amount of time from the last host query message that will be used to determine the loss of the IGMP designated router. " DEFVAL { 140 } ::= { wfIgmpIfEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.13.2.1.1 | wfIgmpIfCreate | 0 | 0 | Indicates whether this IGMP If record is to be deleted or created |
1.3.6.1.4.1.18.3.5.3.13.2.1.2 | wfIgmpIfEnable | 0 | 0 | Indicates whether this IGMP intf record is to be enabled or disabled |
1.3.6.1.4.1.18.3.5.3.13.2.1.3 | wfIgmpIfState | 0 | 0 | The current state of the IGMP interface. Invalid indicates an error in processing the cfg record |
1.3.6.1.4.1.18.3.5.3.13.2.1.4 | wfIgmpDesignatedRouter | 0 | 0 | The current Igmp Designated Router. If there are multipule routers on a multi-access network, this is the router sending the igmp… |
1.3.6.1.4.1.18.3.5.3.13.2.1.5 | wfIgmpIfQueryRate | 0 | 0 | Query rate. This value specifies, in seconds, how often a local group membership is queried. If set to 0, no queries will be se… |
1.3.6.1.4.1.18.3.5.3.13.2.1.6 | wfIgmpIfMembershipTimeout | 0 | 0 | Membership timeout. This value specifies, in seconds, the amount of time that a local group membership is valid without confirma… |
1.3.6.1.4.1.18.3.5.3.13.2.1.8 | wfIgmpIfLocalIpAddress | 0 | 0 | IP Address currently in use on this circuit. This is the IP address that being used to generate and multicast traffic |
1.3.6.1.4.1.18.3.5.3.13.2.1.9 | wfIgmpIfCctno | 0 | 0 | The Circuit IGMP should be running on |
1.3.6.1.4.1.18.3.5.3.13.2.1.10 | wfIgmpIfInDatagrams | 0 | 0 | The total number of IGMP datagrams received on the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.11 | wfIgmpIfOutQueries | 0 | 0 | The number of Host Membership Query messages sent out of this interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.12 | wfIgmpIfInQueries | 0 | 0 | The number of Host Membership Query messages that have been received on this interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.13 | wfIgmpIfDiscards | 0 | 0 | The number of IGMP messages received on this interface that were discarded due to bad checksums, illegal message types, bad value… |
1.3.6.1.4.1.18.3.5.3.13.2.1.14 | wfIgmpIfNetVersion | 0 | 0 | This is the version of igmp that this router believes is running on this network. A value of 1 means IGMPv1 (old igmp) and a valu… |
1.3.6.1.4.1.18.3.5.3.13.2.1.15 | wfIgmpIfMaxHostResponse | 0 | 0 | This is the amount of time in 10th of seconds that a host is supposed to take to respond to a query. This will value will be plac… |
1.3.6.1.4.1.18.3.5.3.13.2.1.16 | wfIgmpIfRoutingProtocol | 0 | 0 | This has the value of the multicast protocol running on this interface. A value 'igmp' means there is no multicast protocol up o… |
1.3.6.1.4.1.18.3.5.3.13.2.1.17 | wfIgmpIfDroppedDataPkt | 0 | 0 | Number of data packets that have to be dropped on this outgoing interface due to lack of buffers. If alias flooding is used for s… |
1.3.6.1.4.1.18.3.5.3.13.2.1.18 | wfIgmpIfMtraceEntryLifetime | 0 | 0 | This is the amount of time in seconds that a router is supposed to keep a forwarding cache entry that was created specifically fo… |
1.3.6.1.4.1.18.3.5.3.13.2.1.19 | wfIgmpIfInMtraceReqs | 0 | 0 | The total number of Mtrace packets received on the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.20 | wfIgmpIfOutMtraceReqs | 0 | 0 | The total number of Mtrace packets send from the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.21 | wfIgmpIfInMtraceResps | 0 | 0 | The total number of Mtrace packets received on the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.22 | wfIgmpIfOutMtraceResps | 0 | 0 | The total number of Mtrace packets send from the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.23 | wfIgmpIfRelayType | 0 | 0 | Indicates whether the IGMP circuit is configured as the primary upstream circuit, the backup upstream circuit or a downstream cir… |
1.3.6.1.4.1.18.3.5.3.13.2.1.24 | wfIgmpIfUnsolicitedReportInterval | 0 | 0 | This mib attribute is the Unsolicited Report Interval, in seconds, which is the time between repetitions of a host's initial repo… |
1.3.6.1.4.1.18.3.5.3.13.2.1.25 | wfIgmpIfSuppressQuery | 0 | 0 | Whether IGMP query is suppressed on this interface. In Bay's multicast implementation, configuring 'IGMP' on an interface means t… |
1.3.6.1.4.1.18.3.5.3.13.2.1.26 | wfIgmpIfGroupCount | 0 | 0 | The total number of groups presented on the interface. |
1.3.6.1.4.1.18.3.5.3.13.2.1.27 | wfIgmpIfVRRPTriggerState | 0 | 0 | Indicates whether VRRP subsystem wants this IGMP Intf to be enabled or disabled. |
1.3.6.1.4.1.18.3.5.3.13.2.1.28 | wfIgmpIfStaticFwdCacheLifeTime | 0 | 0 | If the IGMPStaticForwarding Policy mode is set to static to dynamic (static inbound and multicast protcol outbound) mode. This va… |
1.3.6.1.4.1.18.3.5.3.13.2.1.29 | wfIgmpIfRobustnessVariable | 0 | 0 | This variable allows tuning for the expected packet loss on a network. IGMP is robust to (RobustnessVariable - 1) packet losses. … |
1.3.6.1.4.1.18.3.5.3.13.2.1.30 | wfIgmpIfStartupQueryInterval | 0 | 0 | The interval between General Queries sent by a Querier on startup. |
1.3.6.1.4.1.18.3.5.3.13.2.1.31 | wfIgmpIfStartupQueryCount | 0 | 0 | The number of Queries sent out on startup, separated by the Startup Query Interval. The suggested range of value is 1 ~ 8 |
1.3.6.1.4.1.18.3.5.3.13.2.1.32 | wfIgmpIfLastMemberQueryInterval | 0 | 0 | The Max Response Time used to calculate the Max Resp Code inserted into Group-Specific Queries sent in response to Leave Group me… |
1.3.6.1.4.1.18.3.5.3.13.2.1.33 | wfIgmpIfLastMemberQueryCount | 0 | 0 | The number of Group-Specific Queries sent before the router assumes there are no local members. It is also the number of Group-an… |
1.3.6.1.4.1.18.3.5.3.13.2.1.34 | wfIgmpIfLastMemberQueryTime | 0 | 0 | The time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. Default is (2 * 10 / 10 … |
1.3.6.1.4.1.18.3.5.3.13.2.1.35 | wfIgmpIfOlderHostPresentInterval | 0 | 0 | The time-out for transitioning a group back to IGMPv3 mode once an older version report is sent for that group. When an older ver… |
1.3.6.1.4.1.18.3.5.3.13.2.1.36 | wfIgmpIfOlderQueryReceived | 0 | 0 | The number of queries received on this interface that is not in the same version as wfIgmpIfNetVersion. This may be an older one … |
1.3.6.1.4.1.18.3.5.3.13.2.1.37 | wfIgmpIfOlderHostMsgReceived | 0 | 0 | The number of member report/leave received on this interface that is not in the same version wfIgmpIfNetVersion. This may be an o… |
1.3.6.1.4.1.18.3.5.3.13.2.1.38 | wfIgmpIfMemberTimeout | 0 | 0 | Membership timeout. This value specifies, in seconds, the amount of time that a local group membership is valid without confirmat… |
1.3.6.1.4.1.18.3.5.3.13.2.1.39 | wfIgmpIfQuerierTimeout | 0 | 0 | Querier Router Timeout. This value specifies, in seconds, the amount of time from the last host query message that will be used t… |