This parameter indicates the maximum number of policy rules
that can be configured per type (ACCEPT or ANNOUNCE) per
protocol. In order to configure more policy rules, this
parameter must be changed.
Parsed from file ip.mib.txt
Company: None
Module: Wellfleet-IP-MIB
This parameter indicates the maximum number of policy rules
that can be configured per type (ACCEPT or ANNOUNCE) per
protocol. In order to configure more policy rules, this
parameter must be changed.
Parsed from file Wellfleet-IP-MIB.mib
Module: Wellfleet-IP-MIB
Vendor: Wellfleet
Module: Wellfleet-IP-MIB
[Automatically extracted from oidview.com]
wfIpBaseMaxPolicyRules OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the maximum number of policy rules that can be configured per type (ACCEPT or ANNOUNCE) per protocol. In order to configure more policy rules, this parameter must be changed." DEFVAL { 32 } ::= { wfIpBase 15 }
wfIpBaseMaxPolicyRules OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the maximum number of policy rules that can be configured per type (ACCEPT or ANNOUNCE) per protocol. In order to configure more policy rules, this parameter must be changed." DEFVAL { 32 } ::= { wfIpBase 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.1.1.15.0 | wfIpBaseMaxPolicyRules | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.1.1.1 | wfIpBaseCreate | 1 | 1 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.2 | wfIpBaseEnable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.3 | wfIpBaseState | 1 | 1 | The current state of the entire IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.4 | wfIpBaseForwarding | 1 | 1 | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not a… |
1.3.6.1.4.1.18.3.5.3.2.1.1.5 | wfIpBaseDefaultTTL | 1 | 1 | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL va… |
1.3.6.1.4.1.18.3.5.3.2.1.1.6 | wfIpBaseRipDiameter | 1 | 1 | The Diameter of the RIP network. 1 less than 'infinity |
1.3.6.1.4.1.18.3.5.3.2.1.1.7 | wfIpBaseRouteCache | 1 | 1 | The interval at which routing entries are flushed from the forwarding tables. |
1.3.6.1.4.1.18.3.5.3.2.1.1.8 | wfIpBaseMibTables | 1 | 1 | Configures which routing MIB tables are maintained by IP. Previously, only the wfIpBaseRtTable was maintained. In order to suppo… |
1.3.6.1.4.1.18.3.5.3.2.1.1.9 | wfIpBaseNetworks | 1 | 1 | The number of networks (including subnets) in the routing table |
1.3.6.1.4.1.18.3.5.3.2.1.1.10 | wfIpBaseZeroSubnetEnable | 1 | 1 | This parameter indicates whether or not 0 subnets are allowed. If they are not allowed, interfaces configured with a 0 subnet wil… |
1.3.6.1.4.1.18.3.5.3.2.1.1.11 | wfIpBaseEstimatedNetworks | 1 | 1 | This parameter indicates the estimated number of networks that the router will need to keep in its routing table. |
1.3.6.1.4.1.18.3.5.3.2.1.1.12 | wfIpBaseHosts | 1 | 1 | This parameter indicates the number of hosts resolved by IP. This parameter will be equal to the number of instances of wfIpNetTo… |
1.3.6.1.4.1.18.3.5.3.2.1.1.13 | wfIpBaseEstimatedHosts | 1 | 1 | This parameter indicates the estimated number of hosts that the router will need to keep in its hosts table. |
1.3.6.1.4.1.18.3.5.3.2.1.1.14 | wfIpBaseDefaultOverSubnetEnable | 1 | 1 | This parameter indicates whether or not default route for subnets in subnetted network is allowed. |
1.3.6.1.4.1.18.3.5.3.2.1.1.16 | wfIpBaseRouteFilterSupport | 1 | 1 | This parameter indicates whether or not route filters are supported. |
1.3.6.1.4.1.18.3.5.3.2.1.1.17 | wfRipMaximumPath | 1 | 1 | Maximum number of equal cost paths allowed for a network installed by RIP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.18 | wfIpMultipathMethod | 1 | 1 | Method to use to choose next hop when more than one is available. The round-robin method will send each packet destined for a gi… |
1.3.6.1.4.1.18.3.5.3.2.1.1.19 | wfIpBaseIspMode | 1 | 1 | This parameter indicates whether or not ISP features are supported: i.e. BGP soloist, etc. |
1.3.6.1.4.1.18.3.5.3.2.1.1.20 | wfIpBaseExtendedTrafficFilterSupport | 1 | 1 | This parameter indicates whether or not extended traffic filters are supported. |
1.3.6.1.4.1.18.3.5.3.2.1.1.21 | wfIpOspfMaximumPath | 1 | 1 | Maximum number of equal cost paths allowed for a network installed by OSPF. |
1.3.6.1.4.1.18.3.5.3.2.1.1.22 | wfIpBaseIcmpErrorLimit | 1 | 1 | The maximum number of ICMP messages that is allowed to be transmitted within 1 second interval out of any individual interface. … |
1.3.6.1.4.1.18.3.5.3.2.1.1.23 | wfIpBaseIbgpEcmp | 1 | 1 | IBGP ECMP mode allows BGP to select route to IBGP next hop using available ECMP inter-domain routing information. |
1.3.6.1.4.1.18.3.5.3.2.1.1.24 | wfIpBaseRtbBalanceInterval | 1 | 1 | Time interval (in minutes) to re-balance route pool. If this value is 0, then 'periodical re-balance' functionality is considered… |
1.3.6.1.4.1.18.3.5.3.2.1.1.25 | wfIpBaseRtblP1 | 1 | 1 | Controls the number of indexes in IP routing RTBL. If this value is 0, a value based on the number of hosts and the number of net… |
1.3.6.1.4.1.18.3.5.3.2.1.1.26 | wfIpBaseRtblP2 | 1 | 1 | Controls the deviation of nodes per index from the average number of nodes per index. If this value is 0, a value based on the nu… |
1.3.6.1.4.1.18.3.5.3.2.1.1.27 | wfIpBaseArpBufLimitPrcnt | 1 | 1 | Defines the upper limit (in percent) of buffers that can be used by ARP for saving buffers when resolving ARP request |
1.3.6.1.4.1.18.3.5.3.2.1.1.28 | wfIpBaseDirectedBcastEnable | 1 | 1 | Boxwide directed broadcast Enable/Disable parameter. Default is enabled. |
1.3.6.1.4.1.18.3.5.3.2.1.1.29 | wfIpBaseHostOnlyRip | 1 | 1 | Whether or not listen RIPs in Host Only Mode. |
1.3.6.1.4.1.18.3.5.3.2.1.1.30 | wfIpBaseBlockSRR | 1 | 1 | Blocks incoming IP packets that have the Loose or Strict Source Record Route ip option enabled. Default is disabled which will a… |
1.3.6.1.4.1.18.3.5.3.2.1.1.31 | wfIpBaseIcmpEchoUniIdEnable | 1 | 1 | When enabled, Icmp Echo request identifier field is incremented for each Echo request. When disabled, it is not incremented and n… |