Maximum number of equal cost paths allowed for a
network installed by RIP.
Parsed from file ip.mib.txt
Company: None
Module: Wellfleet-IP-MIB
Maximum number of equal cost paths allowed for a
network installed by RIP.
Parsed from file Wellfleet-IP-MIB.mib
Module: Wellfleet-IP-MIB
Vendor: Wellfleet
Module: Wellfleet-IP-MIB
[Automatically extracted from oidview.com]
wfRipMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by RIP." DEFVAL { 1 } ::= { wfIpBase 17 }
wfRipMaximumPath OBJECT-TYPE SYNTAX INTEGER (1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by RIP." DEFVAL { 1 } ::= { wfIpBase 17 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.1.1.17.0 | wfRipMaximumPath | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.1.1.1 | wfIpBaseCreate | 1 | 1 | Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.2 | wfIpBaseEnable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.3 | wfIpBaseState | 1 | 1 | The current state of the entire IP. |
1.3.6.1.4.1.18.3.5.3.2.1.1.4 | wfIpBaseForwarding | 1 | 1 | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not a… |
1.3.6.1.4.1.18.3.5.3.2.1.1.5 | wfIpBaseDefaultTTL | 1 | 1 | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL va… |
1.3.6.1.4.1.18.3.5.3.2.1.1.6 | wfIpBaseRipDiameter | 1 | 1 | The Diameter of the RIP network. 1 less than 'infinity |
1.3.6.1.4.1.18.3.5.3.2.1.1.7 | wfIpBaseRouteCache | 1 | 1 | The interval at which routing entries are flushed from the forwarding tables. |
1.3.6.1.4.1.18.3.5.3.2.1.1.8 | wfIpBaseMibTables | 1 | 1 | Configures which routing MIB tables are maintained by IP. Previously, only the wfIpBaseRtTable was maintained. In order to suppo… |
1.3.6.1.4.1.18.3.5.3.2.1.1.9 | wfIpBaseNetworks | 1 | 1 | The number of networks (including subnets) in the routing table |
1.3.6.1.4.1.18.3.5.3.2.1.1.10 | wfIpBaseZeroSubnetEnable | 1 | 1 | This parameter indicates whether or not 0 subnets are allowed. If they are not allowed, interfaces configured with a 0 subnet wil… |
1.3.6.1.4.1.18.3.5.3.2.1.1.11 | wfIpBaseEstimatedNetworks | 1 | 1 | This parameter indicates the estimated number of networks that the router will need to keep in its routing table. |
1.3.6.1.4.1.18.3.5.3.2.1.1.12 | wfIpBaseHosts | 1 | 1 | This parameter indicates the number of hosts resolved by IP. This parameter will be equal to the number of instances of wfIpNetTo… |
1.3.6.1.4.1.18.3.5.3.2.1.1.13 | wfIpBaseEstimatedHosts | 1 | 1 | This parameter indicates the estimated number of hosts that the router will need to keep in its hosts table. |
1.3.6.1.4.1.18.3.5.3.2.1.1.14 | wfIpBaseDefaultOverSubnetEnable | 1 | 1 | This parameter indicates whether or not default route for subnets in subnetted network is allowed. |
1.3.6.1.4.1.18.3.5.3.2.1.1.15 | wfIpBaseMaxPolicyRules | 1 | 1 | This parameter indicates the maximum number of policy rules that can be configured per type (ACCEPT or ANNOUNCE) per protocol. I… |
1.3.6.1.4.1.18.3.5.3.2.1.1.16 | wfIpBaseRouteFilterSupport | 1 | 1 | This parameter indicates whether or not route filters are supported. |
1.3.6.1.4.1.18.3.5.3.2.1.1.18 | wfIpMultipathMethod | 1 | 1 | Method to use to choose next hop when more than one is available. The round-robin method will send each packet destined for a gi… |
1.3.6.1.4.1.18.3.5.3.2.1.1.19 | wfIpBaseIspMode | 1 | 1 | This parameter indicates whether or not ISP features are supported: i.e. BGP soloist, etc. |
1.3.6.1.4.1.18.3.5.3.2.1.1.20 | wfIpBaseExtendedTrafficFilterSupport | 1 | 1 | This parameter indicates whether or not extended traffic filters are supported. |
1.3.6.1.4.1.18.3.5.3.2.1.1.21 | wfIpOspfMaximumPath | 1 | 1 | Maximum number of equal cost paths allowed for a network installed by OSPF. |
1.3.6.1.4.1.18.3.5.3.2.1.1.22 | wfIpBaseIcmpErrorLimit | 1 | 1 | The maximum number of ICMP messages that is allowed to be transmitted within 1 second interval out of any individual interface. … |
1.3.6.1.4.1.18.3.5.3.2.1.1.23 | wfIpBaseIbgpEcmp | 1 | 1 | IBGP ECMP mode allows BGP to select route to IBGP next hop using available ECMP inter-domain routing information. |
1.3.6.1.4.1.18.3.5.3.2.1.1.24 | wfIpBaseRtbBalanceInterval | 1 | 1 | Time interval (in minutes) to re-balance route pool. If this value is 0, then 'periodical re-balance' functionality is considered… |
1.3.6.1.4.1.18.3.5.3.2.1.1.25 | wfIpBaseRtblP1 | 1 | 1 | Controls the number of indexes in IP routing RTBL. If this value is 0, a value based on the number of hosts and the number of net… |
1.3.6.1.4.1.18.3.5.3.2.1.1.26 | wfIpBaseRtblP2 | 1 | 1 | Controls the deviation of nodes per index from the average number of nodes per index. If this value is 0, a value based on the nu… |
1.3.6.1.4.1.18.3.5.3.2.1.1.27 | wfIpBaseArpBufLimitPrcnt | 1 | 1 | Defines the upper limit (in percent) of buffers that can be used by ARP for saving buffers when resolving ARP request |
1.3.6.1.4.1.18.3.5.3.2.1.1.28 | wfIpBaseDirectedBcastEnable | 1 | 1 | Boxwide directed broadcast Enable/Disable parameter. Default is enabled. |
1.3.6.1.4.1.18.3.5.3.2.1.1.29 | wfIpBaseHostOnlyRip | 1 | 1 | Whether or not listen RIPs in Host Only Mode. |
1.3.6.1.4.1.18.3.5.3.2.1.1.30 | wfIpBaseBlockSRR | 1 | 1 | Blocks incoming IP packets that have the Loose or Strict Source Record Route ip option enabled. Default is disabled which will a… |
1.3.6.1.4.1.18.3.5.3.2.1.1.31 | wfIpBaseIcmpEchoUniIdEnable | 1 | 1 | When enabled, Icmp Echo request identifier field is incremented for each Echo request. When disabled, it is not incremented and n… |