ons15501Attr OBJECT IDENTIFIER ::= { ons15501MIB 2 }
ons15501Attr OBJECT IDENTIFIER ::= { ons15501MIB 2 }
Vendor: Optical Transmission Labs, Inc.
Module: ONS15501-MIB
[Automatically extracted from oidview.com]
ons15501Attr OBJECT IDENTIFIER ::= { ons15501MIB 2 }
ons15501Attr OBJECT IDENTIFIER ::= { ons15501MIB 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1869.11.11.2.1 | ons15501InputOpticalPower | 1 | 1 | The optical power being fed into the Amplifier. |
1.3.6.1.4.1.1869.11.11.2.2 | ons15501InputOpticalPowerMean | 1 | 1 | Mean value for input optical power. If the input optical power falls below the mean value by more than trigger (see ons15501InputO… |
1.3.6.1.4.1.1869.11.11.2.3 | ons15501InputOpticalPowerTrigger | 1 | 1 | Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not … |
1.3.6.1.4.1.1869.11.11.2.4 | ons15501OutputOpticalPower | 1 | 1 | The measured value for raw optical power being generated at the output of the Amplifier. |
1.3.6.1.4.1.1869.11.11.2.5 | ons15501OutputSignalPower | 1 | 1 | The optical signal power at the output of the Amplifier. The value of this attribute triggers the alarm, based on mean value and … |
1.3.6.1.4.1.1869.11.11.2.6 | ons15501OutputSignalPowerMean | 1 | 1 | Mean value for output optical power. If the output signal power falls below (or goes above) the mean value by more than trigger (s… |
1.3.6.1.4.1.1869.11.11.2.7 | ons15501OutputSignalPowerTrigger | 1 | 1 | Trigger defines the max deviation allowed from the mean, without an alarm being generated. Once an alarm is generated, it is not … |
1.3.6.1.4.1.1869.11.11.2.8 | ons15501ConfigOpticalGain | 1 | 1 | The configured value for power gain. |
1.3.6.1.4.1.1869.11.11.2.9 | ons15501OpticalPowerGain | 1 | 1 | The measured value for power gain. This value does not include the amplification noise that is significant for low input signals. |
1.3.6.1.4.1.1869.11.11.2.10 | ons15501GainTrigger | 1 | 1 | The gain deviation allowed from the configured gain before an alarm is asserted. The alarm is not cleared, until measured gain(on… |
1.3.6.1.4.1.1869.11.11.2.11 | ons15501PowerSupply1Level | 1 | 1 | The voltage fed through power supply 1. The value of the attribute is 10 times the the value in volts. |
1.3.6.1.4.1.1869.11.11.2.12 | ons15501PowerSupply2Level | 1 | 1 | The voltage fed through power supply 2. The value of the attribute is 10 times the the value in volts. |
1.3.6.1.4.1.1869.11.11.2.13 | ons15501LaserStatus | 1 | 1 | Gives the status of the laser pumps. |
1.3.6.1.4.1.1869.11.11.2.14 | ons15501DevAmbTemp | 1 | 1 | The ambient temperature for the device. |
1.3.6.1.4.1.1869.11.11.2.15 | ons15501DevAmbTempMean | 1 | 1 | Mean value for temperature. If the temperature falls below (or goes above) the mean value by more than trigger level (see ons15501… |
1.3.6.1.4.1.1869.11.11.2.16 | ons15501DevAmbTempTrigger | 1 | 1 | Please refer to ons15501DevAmbTempMean above. Trigger defines the max deviation allowed from the mean, without an alarm being gen… |
1.3.6.1.4.1.1869.11.11.2.17 | ons15501PowerSupply1Status | 1 | 1 | Gives the status of power supply one. |
1.3.6.1.4.1.1869.11.11.2.18 | ons15501PowerSupply2Status | 1 | 1 | Gives the status of power supply two. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1869.11.11.1 | ons15501Sys | 25 | 50 | None |
1.3.6.1.4.1.1869.11.11.3 | ons15501Alarms | 4 | 23 | None |
1.3.6.1.4.1.1869.11.11.4 | ons15501Notification | 1 | 2 | None |
1.3.6.1.4.1.1869.11.11.5 | ons15501OIDs | 3 | 9 | None |
1.3.6.1.4.1.1869.11.11.6 | ons15501MIBConformance | 2 | 14 | None |