Numbers of data samples collected for the integer,
counter, or gauge maximum, minimum, and average threshold
data collected. A SET of any value to this variable
causes the maximum, minimum, and average to clear.
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
When enabled the threshold result(s) are stored in the
Threshold Result Table. When disabled, no entries are
generated for the Threshold Result Table.
Default is enabled.
Parsed from file MIDLEVELMGR-MIB.mib
Module: MIDLEVELMGR-MIB
Vendor: IBM
Module: MIDLEVELMGR-MIB
[Automatically extracted from oidview.com]
sm6kThresholdDataSamples OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Numbers of data samples collected for the integer, counter, or gauge maximum, minimum, and average threshold data collected. A SET of any value to this variable causes the maximum, minimum, and average to clear." ::= { sm6kThresholdEntry 16 }
smMlmThresholdResultsTableState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When enabled the threshold result(s) are stored in the Threshold Result Table. When disabled, no entries are generated for the Threshold Result Table. Default is enabled." ::= { smMlmThresholdEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.5.1.1.1 | smMlmThresholdState, sm6kThresholdState | 0 | 0 | State for the threshold operation. The store operation allows the saving of the MIB variable data in a file during the threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.2 | smMlmThresholdName, sm6kThresholdName | 0 | 0 | This field is used as a label and as the SNMP instance identifier for variables in this row. The threshold name is appended to t… |
| 1.3.6.1.4.1.2.6.12.5.1.1.3 | smMlmThresholdDescription, sm6kThresholdDescription | 0 | 0 | This is a description of the threshold being performed for the benefit of administrators only; it is not used by the agent. |
| 1.3.6.1.4.1.2.6.12.5.1.1.4 | smMlmThresholdOwnerID, sm6kThresholdOwnerID | 0 | 0 | Owner ID (IP address or hostname) who generated this entry (not currently used). |
| 1.3.6.1.4.1.2.6.12.5.1.1.5 | smMlmThresholdLocalRemoteMIBVariable, sm6kThresholdLocalRemoteMIBVariable | 0 | 0 | This field specifies the MIB variable on which thresholding is to be performed, in dotted numeric notation, followed by an instan… |
| 1.3.6.1.4.1.2.6.12.5.1.1.6 | smMlmThresholdCondition, sm6kThresholdCondition | 0 | 0 | Condition operation for threshold value. Allowed conditions are: =, >, >=, <, <=, !=, !, &, |, changes, doesNotChange, exists, doesNotExist. The change condition causes a w… |
| 1.3.6.1.4.1.2.6.12.5.1.1.7 | smMlmThresholdValue, sm6kThresholdValue | 0 | 0 | This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the typ… |
| 1.3.6.1.4.1.2.6.12.5.1.1.8 | smMlmThresholdPollTime, sm6kThresholdPollTime | 0 | 0 | Threshold polling time. Polling units are in minutes. |
| 1.3.6.1.4.1.2.6.12.5.1.1.9 | smMlmThresholdLastValue, sm6kThresholdLastValue | 0 | 0 | Last threshold value retrieved, in human-readable form. If more than one numeric value was retrieved for the threshold (because a… |
| 1.3.6.1.4.1.2.6.12.5.1.1.10 | smMlmThresholdIntegerDataMax, sm6kThresholdIntegerDataMax | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.11 | smMlmThresholdIntegerDataMin, sm6kThresholdIntegerDataMin | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.12 | smMlmThresholdIntegerDataAvg, sm6kThresholdIntegerDataAvg | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.13 | smMlmThresholdArmSeverity, sm6kThresholdCounterGaugeDataMax | 0 | 0 | Counter/gauge maximum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.14 | smMlmThresholdReArmSeverity, sm6kThresholdCounterGaugeDataMin | 0 | 0 | Counter/gauge minimum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.15 | smMlmThresholdResultIndex, sm6kThresholdCounterGaugeDataAvg | 0 | 0 | Counter/gauge average data value collected for the threshold being calculated. |
| 1.3.6.1.4.1.2.6.12.5.1.1.17 | smMlmThresholdTrapDescription, sm6kThresholdTrapDescription | 0 | 0 | A human-readable description for the trap to be generated; this description is sent in the trap for operator use. The environment… |
| 1.3.6.1.4.1.2.6.12.5.1.1.18 | smMlmThresholdArmEnterprise, sm6kThresholdArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a threshold condition is met. If this is not s… |
| 1.3.6.1.4.1.2.6.12.5.1.1.19 | smMlmThresholdSpecificTrap, sm6kThresholdSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a threshold condition is met. If this value is zero, no trap will be… |
| 1.3.6.1.4.1.2.6.12.5.1.1.20 | smMlmThresholdCommandToExecute, sm6kThresholdCommandToExecute | 0 | 0 | Command to execute when threshold is met. A value of blank means no command is to be executed on a threshold met condition. Envi… |
| 1.3.6.1.4.1.2.6.12.5.1.1.21 | smMlmThresholdReArmCondition, sm6kThresholdReArmCondition | 0 | 0 | Condition operation for the rearm threshold value. Allowed conditions are the same as for the threshold value. Checking against … |
| 1.3.6.1.4.1.2.6.12.5.1.1.22 | smMlmThresholdReArmValue, sm6kThresholdReArmValue | 0 | 0 | This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the typ… |
| 1.3.6.1.4.1.2.6.12.5.1.1.23 | smMlmThresholdReArmTrapDescription, sm6kThresholdReArmTrapDescription | 0 | 0 | Trap description for the generated rearm trap. The environment variables listed below, pre-appended with a $ sign, are allowed in… |
| 1.3.6.1.4.1.2.6.12.5.1.1.24 | smMlmThresholdReArmEnterprise, sm6kThresholdReArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a rearm condition is met. If this is not set, … |
| 1.3.6.1.4.1.2.6.12.5.1.1.25 | smMlmThresholdReArmSpecificTrap, sm6kThresholdReArmSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a rearm condition is met. If this value is zero, no trap will be sen… |
| 1.3.6.1.4.1.2.6.12.5.1.1.26 | smMlmThresholdReArmCommandToExecute, sm6kThresholdReArmCommandToExecute | 0 | 0 | Command to execute when the rearm threshold is met. A value of blank means no command will be executed on a rearm threshold met c… |
| 1.3.6.1.4.1.2.6.12.5.1.1.27 | smMlmThresholdLastChangedSession, sm6kThresholdLastChangedSession | 0 | 0 | This field contains the name of the last node for which a threshold arm/rearm condition was met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.28 | smMlmThresholdStandardError, sm6kThresholdStandardError | 0 | 0 | This field contains informational and error messages for this threshold entry. |
| 1.3.6.1.4.1.2.6.12.5.1.1.29 | smMlmThresholdLastResponseTime, sm6kThresholdLastResponseTime | 0 | 0 | This field contains the last time a (valid or invalid) response was received to a poll request. |
| 1.3.6.1.4.1.2.6.12.5.1.1.30 | smMlmThresholdResponseCount, sm6kThresholdResponseCount | 0 | 0 | Number of responses received to date. |
| 1.3.6.1.4.1.2.6.12.5.1.1.31 | smMlmThresholdTimeoutCount, sm6kThresholdTimeoutCount | 0 | 0 | Number of timeout conditions, indicating no response or an overrun condition (polling speed faster than the response time from th… |
| 1.3.6.1.4.1.2.6.12.5.1.1.32 | smMlmThresholdNoValueCount, sm6kThresholdNoValueCount | 0 | 0 | Number of responses received containing no values. These responses may be caused by an invalid community name, by a remote SNMP … |
| 1.3.6.1.4.1.2.6.12.5.1.1.33 | smMlmThresholdArmConditionMetCount | 0 | 0 | This field contains the total count that the arm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.34 | smMlmThresholdReArmConditionMetCount | 0 | 0 | This field contains the total count that the rearm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.35 | smMlmThresholdThrottleArmCount | 0 | 0 | This field specifies the number of consecutive arm conditions which must be met before the threshold is armed. The ThresholdPoll… |
| 1.3.6.1.4.1.2.6.12.5.1.1.36 | smMlmThresholdThrottleReArmCount | 0 | 0 | This field specifies the number of consecutive rearm conditions which must be met before the threshold is rearmed. The Threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.37 | smMlmThresholdParticipationState | 0 | 0 | This field indicates whether or not the entry is participating in the threshold. When the threshold entry is active, it is parti… |
| 1.3.6.1.4.1.2.6.12.5.1.1.38 | smMlmThresholdActivationTime | 0 | 0 | This field specifies the time to activate the threshold (ie. change the participation state from inactive to active). The format … |
| 1.3.6.1.4.1.2.6.12.5.1.1.39 | smMlmThresholdActivationDayOfWeek | 0 | 0 | This field specifies the days of the week to activate the threshold at the time specified in the ActivationTime field (ie. change… |
| 1.3.6.1.4.1.2.6.12.5.1.1.40 | smMlmThresholdDeactivationTime | 0 | 0 | This field specifies the time to deactivate the threshold (ie. change the participation state from active to inactive). The forma… |
| 1.3.6.1.4.1.2.6.12.5.1.1.41 | smMlmThresholdDeactivationDayOfWeek | 0 | 0 | This field specifies the days of the week to deactivate the threshold at the time specified in the DeactivationTime field (ie. ch… |