Command to execute when threshold is met. A value of
blank means no command is to be executed on a threshold
met condition. Environment variables which are available
on execution are:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Threshold
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
Command to execute when threshold is met. A value of
blank means no command is to be executed on a threshold
met condition. Environment variables which are available
on execution are:
SM6K_HOSTNAME={hostname running subagent}
SM6K_DOMAIN_NAME={fully qualified hostname}
SM6K_HOST_ADDRESS={ip address}
SM6K_INSTANCE_NAME={instance string of row}
SM6K_INSTANCE_ID={instance ASCII octet value of row}
SM6K_EXECUTION_REASON=Threshold
SM6K_THRESHOLD_CONDITION={condition in the threshold}
SM6K_THRESHOLD_VALUE={threshold value}
SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for rearm}
SM6K_THRESHOLD_THROTTLE_COUNT={count for arm or rearm}
SM6K_THRESHOLD_NODE={node on which threshold condition was met}
SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold}
SM6K_THRESHOLD_VAR_INSTANCE={instance for Object ID}
SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge}
SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold}
SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}
SM6K_THRESHOLD_SEVERITY={severity of threshold condition}
Parsed from file MIDLEVELMGR-MIB.mib
Module: MIDLEVELMGR-MIB
Vendor: IBM
Module: MIDLEVELMGR-MIB
[Automatically extracted from oidview.com]
sm6kThresholdCommandToExecute OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Command to execute when threshold is met. A value of blank means no command is to be executed on a threshold met condition. Environment variables which are available on execution are: SM6K_HOSTNAME={hostname running subagent} SM6K_DOMAIN_NAME={fully qualified hostname} SM6K_HOST_ADDRESS={ip address} SM6K_INSTANCE_NAME={instance string of row} SM6K_INSTANCE_ID={instance ASCII octet value of row} SM6K_EXECUTION_REASON=Threshold SM6K_THRESHOLD_CONDITION={condition in the threshold} SM6K_THRESHOLD_VALUE={threshold value} SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for re-arm} SM6K_THRESHOLD_NODE={node on which threshold condition was met} SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold} SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge} SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold} SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable}" ::= { sm6kThresholdEntry 20 }
smMlmThresholdCommandToExecute OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Command to execute when threshold is met. A value of blank means no command is to be executed on a threshold met condition. Environment variables which are available on execution are: SM6K_HOSTNAME={hostname running subagent} SM6K_DOMAIN_NAME={fully qualified hostname} SM6K_HOST_ADDRESS={ip address} SM6K_INSTANCE_NAME={instance string of row} SM6K_INSTANCE_ID={instance ASCII octet value of row} SM6K_EXECUTION_REASON=Threshold SM6K_THRESHOLD_CONDITION={condition in the threshold} SM6K_THRESHOLD_VALUE={threshold value} SM6K_THRESHOLD_ARMSTATE={-1 for arm, 0 for rearm} SM6K_THRESHOLD_THROTTLE_COUNT={count for arm or rearm} SM6K_THRESHOLD_NODE={node on which threshold condition was met} SM6K_THRESHOLD_VAR_OID={Object ID of variable for the threshold} SM6K_THRESHOLD_VAR_INSTANCE={instance for Object ID} SM6K_THRESHOLD_VAR_TYPE={Integer|Counter|Gauge} SM6K_THRESHOLD_VAR_VALUE={value of variable for the threshold} SM6K_THRESHOLD_VAR_OLDVALUE={previous value of variable} SM6K_THRESHOLD_SEVERITY={severity of threshold condition}" ::= { smMlmThresholdEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.5.1.1.1 | smMlmThresholdState, sm6kThresholdState | 0 | 0 | State for the threshold operation. The store operation allows the saving of the MIB variable data in a file during the threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.2 | smMlmThresholdName, sm6kThresholdName | 0 | 0 | This field is used as a label and as the SNMP instance identifier for variables in this row. The threshold name is appended to t… |
| 1.3.6.1.4.1.2.6.12.5.1.1.3 | smMlmThresholdDescription, sm6kThresholdDescription | 0 | 0 | This is a description of the threshold being performed for the benefit of administrators only; it is not used by the agent. |
| 1.3.6.1.4.1.2.6.12.5.1.1.4 | smMlmThresholdOwnerID, sm6kThresholdOwnerID | 0 | 0 | Owner ID (IP address or hostname) who generated this entry (not currently used). |
| 1.3.6.1.4.1.2.6.12.5.1.1.5 | smMlmThresholdLocalRemoteMIBVariable, sm6kThresholdLocalRemoteMIBVariable | 0 | 0 | This field specifies the MIB variable on which thresholding is to be performed, in dotted numeric notation, followed by an instan… |
| 1.3.6.1.4.1.2.6.12.5.1.1.6 | smMlmThresholdCondition, sm6kThresholdCondition | 0 | 0 | Condition operation for threshold value. Allowed conditions are: =, >, >=, <, <=, !=, !, &, |, changes, doesNotChange, exists, doesNotExist. The change condition causes a w… |
| 1.3.6.1.4.1.2.6.12.5.1.1.7 | smMlmThresholdValue, sm6kThresholdValue | 0 | 0 | This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the typ… |
| 1.3.6.1.4.1.2.6.12.5.1.1.8 | smMlmThresholdPollTime, sm6kThresholdPollTime | 0 | 0 | Threshold polling time. Polling units are in minutes. |
| 1.3.6.1.4.1.2.6.12.5.1.1.9 | smMlmThresholdLastValue, sm6kThresholdLastValue | 0 | 0 | Last threshold value retrieved, in human-readable form. If more than one numeric value was retrieved for the threshold (because a… |
| 1.3.6.1.4.1.2.6.12.5.1.1.10 | smMlmThresholdIntegerDataMax, sm6kThresholdIntegerDataMax | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.11 | smMlmThresholdIntegerDataMin, sm6kThresholdIntegerDataMin | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.12 | smMlmThresholdIntegerDataAvg, sm6kThresholdIntegerDataAvg | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.13 | smMlmThresholdArmSeverity, sm6kThresholdCounterGaugeDataMax | 0 | 0 | Counter/gauge maximum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.14 | smMlmThresholdReArmSeverity, sm6kThresholdCounterGaugeDataMin | 0 | 0 | Counter/gauge minimum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.15 | smMlmThresholdResultIndex, sm6kThresholdCounterGaugeDataAvg | 0 | 0 | Counter/gauge average data value collected for the threshold being calculated. |
| 1.3.6.1.4.1.2.6.12.5.1.1.16 | smMlmThresholdResultsTableState, sm6kThresholdDataSamples | 0 | 0 | When enabled the threshold result(s) are stored in the Threshold Result Table. When disabled, no entries are generated for the T… |
| 1.3.6.1.4.1.2.6.12.5.1.1.17 | smMlmThresholdTrapDescription, sm6kThresholdTrapDescription | 0 | 0 | A human-readable description for the trap to be generated; this description is sent in the trap for operator use. The environment… |
| 1.3.6.1.4.1.2.6.12.5.1.1.18 | smMlmThresholdArmEnterprise, sm6kThresholdArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a threshold condition is met. If this is not s… |
| 1.3.6.1.4.1.2.6.12.5.1.1.19 | smMlmThresholdSpecificTrap, sm6kThresholdSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a threshold condition is met. If this value is zero, no trap will be… |
| 1.3.6.1.4.1.2.6.12.5.1.1.21 | smMlmThresholdReArmCondition, sm6kThresholdReArmCondition | 0 | 0 | Condition operation for the rearm threshold value. Allowed conditions are the same as for the threshold value. Checking against … |
| 1.3.6.1.4.1.2.6.12.5.1.1.22 | smMlmThresholdReArmValue, sm6kThresholdReArmValue | 0 | 0 | This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the typ… |
| 1.3.6.1.4.1.2.6.12.5.1.1.23 | smMlmThresholdReArmTrapDescription, sm6kThresholdReArmTrapDescription | 0 | 0 | Trap description for the generated rearm trap. The environment variables listed below, pre-appended with a $ sign, are allowed in… |
| 1.3.6.1.4.1.2.6.12.5.1.1.24 | smMlmThresholdReArmEnterprise, sm6kThresholdReArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a rearm condition is met. If this is not set, … |
| 1.3.6.1.4.1.2.6.12.5.1.1.25 | smMlmThresholdReArmSpecificTrap, sm6kThresholdReArmSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a rearm condition is met. If this value is zero, no trap will be sen… |
| 1.3.6.1.4.1.2.6.12.5.1.1.26 | smMlmThresholdReArmCommandToExecute, sm6kThresholdReArmCommandToExecute | 0 | 0 | Command to execute when the rearm threshold is met. A value of blank means no command will be executed on a rearm threshold met c… |
| 1.3.6.1.4.1.2.6.12.5.1.1.27 | smMlmThresholdLastChangedSession, sm6kThresholdLastChangedSession | 0 | 0 | This field contains the name of the last node for which a threshold arm/rearm condition was met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.28 | smMlmThresholdStandardError, sm6kThresholdStandardError | 0 | 0 | This field contains informational and error messages for this threshold entry. |
| 1.3.6.1.4.1.2.6.12.5.1.1.29 | smMlmThresholdLastResponseTime, sm6kThresholdLastResponseTime | 0 | 0 | This field contains the last time a (valid or invalid) response was received to a poll request. |
| 1.3.6.1.4.1.2.6.12.5.1.1.30 | smMlmThresholdResponseCount, sm6kThresholdResponseCount | 0 | 0 | Number of responses received to date. |
| 1.3.6.1.4.1.2.6.12.5.1.1.31 | smMlmThresholdTimeoutCount, sm6kThresholdTimeoutCount | 0 | 0 | Number of timeout conditions, indicating no response or an overrun condition (polling speed faster than the response time from th… |
| 1.3.6.1.4.1.2.6.12.5.1.1.32 | smMlmThresholdNoValueCount, sm6kThresholdNoValueCount | 0 | 0 | Number of responses received containing no values. These responses may be caused by an invalid community name, by a remote SNMP … |
| 1.3.6.1.4.1.2.6.12.5.1.1.33 | smMlmThresholdArmConditionMetCount | 0 | 0 | This field contains the total count that the arm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.34 | smMlmThresholdReArmConditionMetCount | 0 | 0 | This field contains the total count that the rearm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.35 | smMlmThresholdThrottleArmCount | 0 | 0 | This field specifies the number of consecutive arm conditions which must be met before the threshold is armed. The ThresholdPoll… |
| 1.3.6.1.4.1.2.6.12.5.1.1.36 | smMlmThresholdThrottleReArmCount | 0 | 0 | This field specifies the number of consecutive rearm conditions which must be met before the threshold is rearmed. The Threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.37 | smMlmThresholdParticipationState | 0 | 0 | This field indicates whether or not the entry is participating in the threshold. When the threshold entry is active, it is parti… |
| 1.3.6.1.4.1.2.6.12.5.1.1.38 | smMlmThresholdActivationTime | 0 | 0 | This field specifies the time to activate the threshold (ie. change the participation state from inactive to active). The format … |
| 1.3.6.1.4.1.2.6.12.5.1.1.39 | smMlmThresholdActivationDayOfWeek | 0 | 0 | This field specifies the days of the week to activate the threshold at the time specified in the ActivationTime field (ie. change… |
| 1.3.6.1.4.1.2.6.12.5.1.1.40 | smMlmThresholdDeactivationTime | 0 | 0 | This field specifies the time to deactivate the threshold (ie. change the participation state from active to inactive). The forma… |
| 1.3.6.1.4.1.2.6.12.5.1.1.41 | smMlmThresholdDeactivationDayOfWeek | 0 | 0 | This field specifies the days of the week to deactivate the threshold at the time specified in the DeactivationTime field (ie. ch… |