This field specifies the value against which retrieved
variables are checked. The type of check which is done
depends on the type of the retrieved variable. If the
variable is numeric (INTEGER, Counter, etc.) this field is
presumed to be a number, and a numeric comparison is performed
using the specified threshold condition. If the retrieved
variable is a DisplayString (OCTET STRING) and both the
retrieved variable and this field can be converted to a
floating point number, a floating-point comparison is done;
otherwise a string comparison is done.
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
This field specifies the value against which retrieved
variables are checked. The type of check which is done
depends on the type of the retrieved variable. If the
variable is numeric (INTEGER, Counter, etc.) this field is
presumed to be a number, and a numeric comparison is performed
using the specified threshold condition. If the retrieved
variable is a DisplayString (OCTET STRING) and the 'value'
keyword is used on the condition then both the
retrieved variable and this field can be converted to a
floating point number, a floating-point comparison is done;
otherwise a string comparison is done.
If the ~(LIKE) or ~=(LIKE CASE) condition is used then
the value can be an extended regular expression.
A value expression is also allowed to be specified. The
expression can be any expression comprised of the following
functions:
'Min' - lifetime minimum 'iMin' - interval minimum
'Max' - lifetime maximum 'iMax' - interval maximum
'Avg' - lifetime average 'iAvg' - interval average
'Sd' - lifetime standard 'iSd' - interval standard
deviation deviation
'Var' - lifetime variance 'iVar' - interval variance
'Smpls' - lifetime samples 'iSmpls' - interval samples
'sTime' - sample time in secs 'iTime' - interval time in secs
'iRate' - rate of change over the
interval
The interval is defined by the MIB variable:
smMlmProgramControlSamplesPerInterval.
The expression has the following high to low precedence and left
to right associativity of operators:
() : grouping
- : unary minus
* : multiplication, / : division, % : remainder
+ : addition, - : subtraction
<< : bitwise left shift, >> : bitwise right shift
& : bitwise AND
^ : bitwise exclusive OR
| : bitwise inclusive OR
Expression evaluation/operators are based on standard
c program execution.
For example: Avg+2*Sd is the average value over the
lifetime of the threshold plus two times
the standard deviation.
Parsed from file MIDLEVELMGR-MIB.mib
Module: MIDLEVELMGR-MIB
Vendor: IBM
Module: MIDLEVELMGR-MIB
[Automatically extracted from oidview.com]
sm6kThresholdValue OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the type of the retrieved variable. If the variable is numeric (INTEGER, Counter, etc.) this field is presumed to be a number, and a numeric comparison is performed using the specified threshold condition. If the retrieved variable is a DisplayString (OCTET STRING) and both the retrieved variable and this field can be converted to a floating point number, a floating-point comparison is done; otherwise a string comparison is done." ::= { sm6kThresholdEntry 7 }
smMlmThresholdValue OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the type of the retrieved variable. If the variable is numeric (INTEGER, Counter, etc.) this field is presumed to be a number, and a numeric comparison is performed using the specified threshold condition. If the retrieved variable is a DisplayString (OCTET STRING) and the 'value' keyword is used on the condition then both the retrieved variable and this field can be converted to a floating point number, a floating-point comparison is done; otherwise a string comparison is done. If the ~(LIKE) or ~=(LIKE CASE) condition is used then the value can be an extended regular expression. A value expression is also allowed to be specified. The expression can be any expression comprised of the following functions: 'Min' - lifetime minimum 'iMin' - interval minimum 'Max' - lifetime maximum 'iMax' - interval maximum 'Avg' - lifetime average 'iAvg' - interval average 'Sd' - lifetime standard 'iSd' - interval standard deviation deviation 'Var' - lifetime variance 'iVar' - interval variance 'Smpls' - lifetime samples 'iSmpls' - interval samples 'sTime' - sample time in secs 'iTime' - interval time in secs 'iRate' - rate of change over the interval The interval is defined by the MIB variable: smMlmProgramControlSamplesPerInterval. The expression has the following high to low precedence and left to right associativity of operators: () : grouping - : unary minus * : multiplication, / : division, % : remainder + : addition, - : subtraction << : bitwise left shift, >> : bitwise right shift & : bitwise AND ^ : bitwise exclusive OR | : bitwise inclusive OR Expression evaluation/operators are based on standard c program execution. For example: Avg+2*Sd is the average value over the lifetime of the threshold plus two times the standard deviation." ::= { smMlmThresholdEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.5.1.1.1 | smMlmThresholdState, sm6kThresholdState | 0 | 0 | State for the threshold operation. The store operation allows the saving of the MIB variable data in a file during the threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.2 | smMlmThresholdName, sm6kThresholdName | 0 | 0 | This field is used as a label and as the SNMP instance identifier for variables in this row. The threshold name is appended to t… |
| 1.3.6.1.4.1.2.6.12.5.1.1.3 | smMlmThresholdDescription, sm6kThresholdDescription | 0 | 0 | This is a description of the threshold being performed for the benefit of administrators only; it is not used by the agent. |
| 1.3.6.1.4.1.2.6.12.5.1.1.4 | smMlmThresholdOwnerID, sm6kThresholdOwnerID | 0 | 0 | Owner ID (IP address or hostname) who generated this entry (not currently used). |
| 1.3.6.1.4.1.2.6.12.5.1.1.5 | smMlmThresholdLocalRemoteMIBVariable, sm6kThresholdLocalRemoteMIBVariable | 0 | 0 | This field specifies the MIB variable on which thresholding is to be performed, in dotted numeric notation, followed by an instan… |
| 1.3.6.1.4.1.2.6.12.5.1.1.6 | smMlmThresholdCondition, sm6kThresholdCondition | 0 | 0 | Condition operation for threshold value. Allowed conditions are: =, >, >=, <, <=, !=, !, &, |, changes, doesNotChange, exists, doesNotExist. The change condition causes a w… |
| 1.3.6.1.4.1.2.6.12.5.1.1.8 | smMlmThresholdPollTime, sm6kThresholdPollTime | 0 | 0 | Threshold polling time. Polling units are in minutes. |
| 1.3.6.1.4.1.2.6.12.5.1.1.9 | smMlmThresholdLastValue, sm6kThresholdLastValue | 0 | 0 | Last threshold value retrieved, in human-readable form. If more than one numeric value was retrieved for the threshold (because a… |
| 1.3.6.1.4.1.2.6.12.5.1.1.10 | smMlmThresholdIntegerDataMax, sm6kThresholdIntegerDataMax | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.11 | smMlmThresholdIntegerDataMin, sm6kThresholdIntegerDataMin | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.12 | smMlmThresholdIntegerDataAvg, sm6kThresholdIntegerDataAvg | 0 | 0 | Not Implemented. |
| 1.3.6.1.4.1.2.6.12.5.1.1.13 | smMlmThresholdArmSeverity, sm6kThresholdCounterGaugeDataMax | 0 | 0 | Counter/gauge maximum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.14 | smMlmThresholdReArmSeverity, sm6kThresholdCounterGaugeDataMin | 0 | 0 | Counter/gauge minimum data value collected for the threshold being monitored. |
| 1.3.6.1.4.1.2.6.12.5.1.1.15 | smMlmThresholdResultIndex, sm6kThresholdCounterGaugeDataAvg | 0 | 0 | Counter/gauge average data value collected for the threshold being calculated. |
| 1.3.6.1.4.1.2.6.12.5.1.1.16 | smMlmThresholdResultsTableState, sm6kThresholdDataSamples | 0 | 0 | When enabled the threshold result(s) are stored in the Threshold Result Table. When disabled, no entries are generated for the T… |
| 1.3.6.1.4.1.2.6.12.5.1.1.17 | smMlmThresholdTrapDescription, sm6kThresholdTrapDescription | 0 | 0 | A human-readable description for the trap to be generated; this description is sent in the trap for operator use. The environment… |
| 1.3.6.1.4.1.2.6.12.5.1.1.18 | smMlmThresholdArmEnterprise, sm6kThresholdArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a threshold condition is met. If this is not s… |
| 1.3.6.1.4.1.2.6.12.5.1.1.19 | smMlmThresholdSpecificTrap, sm6kThresholdSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a threshold condition is met. If this value is zero, no trap will be… |
| 1.3.6.1.4.1.2.6.12.5.1.1.20 | smMlmThresholdCommandToExecute, sm6kThresholdCommandToExecute | 0 | 0 | Command to execute when threshold is met. A value of blank means no command is to be executed on a threshold met condition. Envi… |
| 1.3.6.1.4.1.2.6.12.5.1.1.21 | smMlmThresholdReArmCondition, sm6kThresholdReArmCondition | 0 | 0 | Condition operation for the rearm threshold value. Allowed conditions are the same as for the threshold value. Checking against … |
| 1.3.6.1.4.1.2.6.12.5.1.1.22 | smMlmThresholdReArmValue, sm6kThresholdReArmValue | 0 | 0 | This field specifies the value against which retrieved variables are checked. The type of check which is done depends on the typ… |
| 1.3.6.1.4.1.2.6.12.5.1.1.23 | smMlmThresholdReArmTrapDescription, sm6kThresholdReArmTrapDescription | 0 | 0 | Trap description for the generated rearm trap. The environment variables listed below, pre-appended with a $ sign, are allowed in… |
| 1.3.6.1.4.1.2.6.12.5.1.1.24 | smMlmThresholdReArmEnterprise, sm6kThresholdReArmEnterprise | 0 | 0 | This field specifies the SNMP enterprise id for the trap which is to be sent when a rearm condition is met. If this is not set, … |
| 1.3.6.1.4.1.2.6.12.5.1.1.25 | smMlmThresholdReArmSpecificTrap, sm6kThresholdReArmSpecificTrap | 0 | 0 | This field specifies a specific trap number to be sent when a rearm condition is met. If this value is zero, no trap will be sen… |
| 1.3.6.1.4.1.2.6.12.5.1.1.26 | smMlmThresholdReArmCommandToExecute, sm6kThresholdReArmCommandToExecute | 0 | 0 | Command to execute when the rearm threshold is met. A value of blank means no command will be executed on a rearm threshold met c… |
| 1.3.6.1.4.1.2.6.12.5.1.1.27 | smMlmThresholdLastChangedSession, sm6kThresholdLastChangedSession | 0 | 0 | This field contains the name of the last node for which a threshold arm/rearm condition was met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.28 | smMlmThresholdStandardError, sm6kThresholdStandardError | 0 | 0 | This field contains informational and error messages for this threshold entry. |
| 1.3.6.1.4.1.2.6.12.5.1.1.29 | smMlmThresholdLastResponseTime, sm6kThresholdLastResponseTime | 0 | 0 | This field contains the last time a (valid or invalid) response was received to a poll request. |
| 1.3.6.1.4.1.2.6.12.5.1.1.30 | smMlmThresholdResponseCount, sm6kThresholdResponseCount | 0 | 0 | Number of responses received to date. |
| 1.3.6.1.4.1.2.6.12.5.1.1.31 | smMlmThresholdTimeoutCount, sm6kThresholdTimeoutCount | 0 | 0 | Number of timeout conditions, indicating no response or an overrun condition (polling speed faster than the response time from th… |
| 1.3.6.1.4.1.2.6.12.5.1.1.32 | smMlmThresholdNoValueCount, sm6kThresholdNoValueCount | 0 | 0 | Number of responses received containing no values. These responses may be caused by an invalid community name, by a remote SNMP … |
| 1.3.6.1.4.1.2.6.12.5.1.1.33 | smMlmThresholdArmConditionMetCount | 0 | 0 | This field contains the total count that the arm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.34 | smMlmThresholdReArmConditionMetCount | 0 | 0 | This field contains the total count that the rearm condition has been met. |
| 1.3.6.1.4.1.2.6.12.5.1.1.35 | smMlmThresholdThrottleArmCount | 0 | 0 | This field specifies the number of consecutive arm conditions which must be met before the threshold is armed. The ThresholdPoll… |
| 1.3.6.1.4.1.2.6.12.5.1.1.36 | smMlmThresholdThrottleReArmCount | 0 | 0 | This field specifies the number of consecutive rearm conditions which must be met before the threshold is rearmed. The Threshold… |
| 1.3.6.1.4.1.2.6.12.5.1.1.37 | smMlmThresholdParticipationState | 0 | 0 | This field indicates whether or not the entry is participating in the threshold. When the threshold entry is active, it is parti… |
| 1.3.6.1.4.1.2.6.12.5.1.1.38 | smMlmThresholdActivationTime | 0 | 0 | This field specifies the time to activate the threshold (ie. change the participation state from inactive to active). The format … |
| 1.3.6.1.4.1.2.6.12.5.1.1.39 | smMlmThresholdActivationDayOfWeek | 0 | 0 | This field specifies the days of the week to activate the threshold at the time specified in the ActivationTime field (ie. change… |
| 1.3.6.1.4.1.2.6.12.5.1.1.40 | smMlmThresholdDeactivationTime | 0 | 0 | This field specifies the time to deactivate the threshold (ie. change the participation state from active to inactive). The forma… |
| 1.3.6.1.4.1.2.6.12.5.1.1.41 | smMlmThresholdDeactivationDayOfWeek | 0 | 0 | This field specifies the days of the week to deactivate the threshold at the time specified in the DeactivationTime field (ie. ch… |