Multicast Send VCC Type. Signalling parameter that
SHOULD be used by the LE Client when establishing
the Multicast Send VCC. This is the method to be used
by the LE Client when specifying traffic parameters
when it sets up the Multicast Send VCC for this
emulated LAN. Corresponds to Initial State
Parameter C24.
Parsed from file osa030c.mib.txt
Company: None
Module: IBM-OSA-MIB
Multicast Send VCC Type. Signalling parameter that
SHOULD be used by the LE Client when establishing
the Multicast Send VCC. This is the method to be used
by the LE Client when specifying traffic parameters
when it sets up the Multicast Send VCC for this
emulated LAN. Corresponds to Initial State
Parameter C24.
Parsed from file IBM-OSA-MIB.mib
Module: IBM-OSA-MIB
Vendor: IBM
Module: IBM-OSA-MIB
[Automatically extracted from oidview.com]
ibmOsaExpATMMltcstSendVCCType OBJECT-TYPE SYNTAX INTEGER { bestEffort(1), variableBitRate(2), constantBitRate(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by the LE Client when specifying traffic parameters when it sets up the Multicast Send VCC for this emulated LAN. Corresponds to Initial State Parameter C24." ::= { ibmOSAExpATMPortEntry 36 }
ibmOsaExpATMMltcstSendVCCType OBJECT-TYPE SYNTAX INTEGER { bestEffort(1), variableBitRate(2), constantBitRate(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by the LE Client when specifying traffic parameters when it sets up the Multicast Send VCC for this emulated LAN. Corresponds to Initial State Parameter C24." ::= { ibmOSAExpATMPortEntry 36 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.188.1.7.1.1 | ibmOsaExpATMPortNumber | 0 | 0 | The logical port number of this port |
| 1.3.6.1.4.1.2.6.188.1.7.1.2 | ibmOsaExpATMPortType | 0 | 0 | The logical port type. |
| 1.3.6.1.4.1.2.6.188.1.7.1.3 | ibmOsaExpATMLanTrafficState | 0 | 0 | The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpATMDisabledStatus. |
| 1.3.6.1.4.1.2.6.188.1.7.1.4 | ibmOsaExpATMServiceMode | 0 | 0 | This object indicates if the processor is in service mode or not. |
| 1.3.6.1.4.1.2.6.188.1.7.1.5 | ibmOsaExpATMDisabledStatus | 0 | 0 | When the value of ibmOsaExpATMLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExp… |
| 1.3.6.1.4.1.2.6.188.1.7.1.6 | ibmOsaExpATMConfigName | 0 | 0 | This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA |
| 1.3.6.1.4.1.2.6.188.1.7.1.7 | ibmOsaExpATMMacAddrActive | 0 | 0 | A 6 byte OCTET STRING which contains the current MAC address in use on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.8 | ibmOsaExpATMMacAddrBurntIn | 0 | 0 | A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.9 | ibmOsaExpATMUserData | 0 | 0 | Data set by the user. It is ignored by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.7.1.12 | ibmOsaExpATMPortName | 0 | 0 | Name of the port as used by TCP/IP |
| 1.3.6.1.4.1.2.6.188.1.7.1.13 | ibmOsaExpATMGroupMacAddrTable | 0 | 0 | This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. |
| 1.3.6.1.4.1.2.6.188.1.7.1.14 | ibmOsaExpATMIBMEnhancedMode | 0 | 0 | When set to Yes, this keeps data connections active when the connection to the LES is lost. |
| 1.3.6.1.4.1.2.6.188.1.7.1.15 | ibmOsaExpATMBestEffortPeakRate | 0 | 0 | Values range from 10-1550 and must be divided by 10 to get the proper value. A value of 1550 indicates 155.0 Mbytes/sec |
| 1.3.6.1.4.1.2.6.188.1.7.1.16 | ibmOsaExpATMConfigMode | 0 | 0 | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic (1) mode, a clien… |
| 1.3.6.1.4.1.2.6.188.1.7.1.17 | ibmOsaExpATMConfigLanType | 0 | 0 | The logical port type that the user configured the port for |
| 1.3.6.1.4.1.2.6.188.1.7.1.18 | ibmOsaExpATMActualLanType | 0 | 0 | The actual logical port type the port is running in |
| 1.3.6.1.4.1.2.6.188.1.7.1.19 | ibmOsaExpATMConfigMaxDataFrmSz | 0 | 0 | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.2.6.188.1.7.1.20 | ibmOsaExpATMActualMaxDataFrmSz | 0 | 0 | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.2.6.188.1.7.1.21 | ibmOsaExpATMConfigELANName | 0 | 0 | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.22 | ibmOsaExpATMActualELANName | 0 | 0 | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.23 | ibmOsaExpATMConfigLESATMAddress | 0 | 0 | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When ibmOsaExpATMCo… |
| 1.3.6.1.4.1.2.6.188.1.7.1.24 | ibmOsaExpATMActualLESATMAddress | 0 | 0 | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode … |
| 1.3.6.1.4.1.2.6.188.1.7.1.25 | ibmOsaExpATMControlTimeout | 0 | 0 | Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere in… |
| 1.3.6.1.4.1.2.6.188.1.7.1.26 | ibmOsaExpATMMaxUnknownFrameCount | 0 | 0 | Maximum Unknown Frame Count. See the description of ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to Initial State Parameter… |
| 1.3.6.1.4.1.2.6.188.1.7.1.27 | ibmOsaExpATMMaxUnknownFrameTime | 0 | 0 | Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.28 | ibmOsaExpATMVCCTimeoutPeriod | 0 | 0 | VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames f… |
| 1.3.6.1.4.1.2.6.188.1.7.1.29 | ibmOsaExpATMMaxRetryCount | 0 | 0 | Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Coun… |
| 1.3.6.1.4.1.2.6.188.1.7.1.30 | ibmOsaExpATMAgingTime | 0 | 0 | Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that… |
| 1.3.6.1.4.1.2.6.188.1.7.1.31 | ibmOsaExpATMForwardDelayTime | 0 | 0 | Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.32 | ibmOsaExpATMExpectedARPRespTime | 0 | 0 | Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take. Used for ret… |
| 1.3.6.1.4.1.2.6.188.1.7.1.33 | ibmOsaExpATMFlushTimeout | 0 | 0 | ibmOsaExpATMFlushtimeout |
| 1.3.6.1.4.1.2.6.188.1.7.1.34 | ibmOsaExpATMPathSwitchingDelay | 0 | 0 | Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been eith… |
| 1.3.6.1.4.1.2.6.188.1.7.1.35 | ibmOsaExpATMLocalSegmentID | 0 | 0 | Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridge… |
| 1.3.6.1.4.1.2.6.188.1.7.1.37 | ibmOsaExpATMMltcstSendVCCAvgRate | 0 | 0 | Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when estabishing the Multicast Send VCC. Fo… |
| 1.3.6.1.4.1.2.6.188.1.7.1.38 | ibmOsaExpATMMcastSendVCCPeakRate | 0 | 0 | Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. … |
| 1.3.6.1.4.1.2.6.188.1.7.1.39 | ibmOsaExpATMConnectCompleteTimer | 0 | 0 | Connection Complete Timer. Optional. In Connection Establish ment this is the time period in which data or a READY_IND message is… |
| 1.3.6.1.4.1.2.6.188.1.7.1.40 | ibmOsaExpATMClientATMAddress | 0 | 0 | LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Di… |
| 1.3.6.1.4.1.2.6.188.1.7.1.41 | ibmOsaExpATMClientIdentifier | 0 | 0 | LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The… |
| 1.3.6.1.4.1.2.6.188.1.7.1.42 | ibmOsaExpATMClientCurrentState | 0 | 0 | The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, this field is … |
| 1.3.6.1.4.1.2.6.188.1.7.1.43 | ibmOsaExpATMLastFailureRespCode | 0 | 0 | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPO… |
| 1.3.6.1.4.1.2.6.188.1.7.1.44 | ibmOsaExpATMLastFailureState | 0 | 0 | The state this client was in when it updated the 'ibmOsaExpATMLastFailureRespCode'. If 'ibmOsaExpATMLastFailureRespCode' is 'none'… |
| 1.3.6.1.4.1.2.6.188.1.7.1.45 | ibmOsaExpATMProtocol | 0 | 0 | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.46 | ibmOsaExpATMLeVersion | 0 | 0 | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.47 | ibmOsaExpATMTopologyChange | 0 | 0 | Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age… |
| 1.3.6.1.4.1.2.6.188.1.7.1.48 | ibmOsaExpATMConfigServerATMAddr | 0 | 0 | The ATM address of the LAN Emulation Configuration Server (if known) or 0 (otherwise). In LAN Emulation MIB, the OCTET STRING is … |
| 1.3.6.1.4.1.2.6.188.1.7.1.49 | ibmOsaExpATMConfigSource | 0 | 0 | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to estab… |
| 1.3.6.1.4.1.2.6.188.1.7.1.50 | ibmOsaExpATMProxyClient | 0 | 0 | Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receiv… |
| 1.3.6.1.4.1.2.6.188.1.7.1.51 | ibmOsaExpATMLePDUOctetsInbound | 0 | 0 | The number of Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.52 | ibmOsaExpATMNonErrLePDUDiscIn | 0 | 0 | The number of Non Error Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.53 | ibmOsaExpATMErrLePDUDiscIn | 0 | 0 | The number of Errored Le PDU Discards received |
| 1.3.6.1.4.1.2.6.188.1.7.1.54 | ibmOsaExpATMLePDUOctetsOutbound | 0 | 0 | The number of Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.55 | ibmOsaExpATMNonErrLePDUDiscOut | 0 | 0 | The number of Non Error Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.56 | ibmOsaExpATMErrLePDUDiscOut | 0 | 0 | The number of Errored Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.57 | ibmOsaExpATMLeARPRequestsOut | 0 | 0 | The number of LE ARP Requests sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.58 | ibmOsaExpATMLeARPRequestsIn | 0 | 0 | The number of LE ARP Requests received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC … |
| 1.3.6.1.4.1.2.6.188.1.7.1.59 | ibmOsaExpATMLeARPRepliesOut | 0 | 0 | The number of LE ARP Responses sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.2.6.188.1.7.1.60 | ibmOsaExpATMLeARPRepliesIn | 0 | 0 | The number of LE ARP Responses received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether… |
| 1.3.6.1.4.1.2.6.188.1.7.1.61 | ibmOsaExpATMControlFramesOut | 0 | 0 | The total number of control packets sent by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.188.1.7.1.62 | ibmOsaExpATMControlFramesIn | 0 | 0 | The total number of control packets received by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.188.1.7.1.63 | ibmOsaExpATMSVCFailures | 0 | 0 | The total number of outgoing LAN Emulation SVCs which this client tried, but failed, to open; incoming LAN Emulation SVCs which t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.64 | ibmOsaExpATMConfigDirectIntfc | 0 | 0 | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. O… |
| 1.3.6.1.4.1.2.6.188.1.7.1.65 | ibmOsaExpATMConfigDirectVPI | 0 | 0 | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to … |
| 1.3.6.1.4.1.2.6.188.1.7.1.66 | ibmOsaExpATMConfigDirectVCI | 0 | 0 | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to … |
| 1.3.6.1.4.1.2.6.188.1.7.1.67 | ibmOsaExpATMControlDirectIntfc | 0 | 0 | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.68 | ibmOsaExpATMControlDirectVPI | 0 | 0 | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.69 | ibmOsaExpATMControlDirectVCI | 0 | 0 | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.70 | ibmOsaExpATMControlDistIntfc | 0 | 0 | The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this objec… |
| 1.3.6.1.4.1.2.6.188.1.7.1.71 | ibmOsaExpATMControlDistributeVPI | 0 | 0 | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.72 | ibmOsaExpATMControlDistributeVCI | 0 | 0 | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.73 | ibmOsaExpATMMulticastSendIntfc | 0 | 0 | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.74 | ibmOsaExpATMMulticastSendVPI | 0 | 0 | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.75 | ibmOsaExpATMMulticastSendVCI | 0 | 0 | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.76 | ibmOsaExpATMMulticastFwdIntfc | 0 | 0 | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object … |
| 1.3.6.1.4.1.2.6.188.1.7.1.77 | ibmOsaExpATMMulticastForwardVPI | 0 | 0 | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to thi… |
| 1.3.6.1.4.1.2.6.188.1.7.1.78 | ibmOsaExpATMMulticastForwardVCI | 0 | 0 | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to thi… |