The total number of control packets sent by this
LAN Emulation Client over the LUNI.
Parsed from file osa030c.mib.txt
Company: None
Module: IBM-OSA-MIB
The total number of control packets sent by this
LAN Emulation Client over the LUNI.
Parsed from file IBM-OSA-MIB.mib
Module: IBM-OSA-MIB
Vendor: IBM
Module: IBM-OSA-MIB
[Automatically extracted from oidview.com]
ibmOsaExpATMControlFramesOut OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of control packets sent by this LAN Emulation Client over the LUNI." ::= { ibmOSAExpATMPortEntry 61 }
ibmOsaExpATMControlFramesOut OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of control packets sent by this LAN Emulation Client over the LUNI." ::= { ibmOSAExpATMPortEntry 61 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.188.1.7.1.1 | ibmOsaExpATMPortNumber | 0 | 0 | The logical port number of this port |
| 1.3.6.1.4.1.2.6.188.1.7.1.2 | ibmOsaExpATMPortType | 0 | 0 | The logical port type. |
| 1.3.6.1.4.1.2.6.188.1.7.1.3 | ibmOsaExpATMLanTrafficState | 0 | 0 | The LAN state value ranges from 0 to 8. A value of 5, disabled is further explained in object ibmOsaExpATMDisabledStatus. |
| 1.3.6.1.4.1.2.6.188.1.7.1.4 | ibmOsaExpATMServiceMode | 0 | 0 | This object indicates if the processor is in service mode or not. |
| 1.3.6.1.4.1.2.6.188.1.7.1.5 | ibmOsaExpATMDisabledStatus | 0 | 0 | When the value of ibmOsaExpATMLanTrafficState is NOT disabled, the value of this object will be zero. When the value of ibmOsaExp… |
| 1.3.6.1.4.1.2.6.188.1.7.1.6 | ibmOsaExpATMConfigName | 0 | 0 | This is the name of the configuration that is on the OSA. It is set using OSA/SF. It is not used by OSA |
| 1.3.6.1.4.1.2.6.188.1.7.1.7 | ibmOsaExpATMMacAddrActive | 0 | 0 | A 6 byte OCTET STRING which contains the current MAC address in use on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.8 | ibmOsaExpATMMacAddrBurntIn | 0 | 0 | A 6 byte OCTET STRING which contains the burned in MAC address on the OSA. The values are in canonical format. |
| 1.3.6.1.4.1.2.6.188.1.7.1.9 | ibmOsaExpATMUserData | 0 | 0 | Data set by the user. It is ignored by the OSA. |
| 1.3.6.1.4.1.2.6.188.1.7.1.12 | ibmOsaExpATMPortName | 0 | 0 | Name of the port as used by TCP/IP |
| 1.3.6.1.4.1.2.6.188.1.7.1.13 | ibmOsaExpATMGroupMacAddrTable | 0 | 0 | This field contains the active Group Addresses. An individual Group Address is 6 bytes long with an additional 2 bytes of padding. |
| 1.3.6.1.4.1.2.6.188.1.7.1.14 | ibmOsaExpATMIBMEnhancedMode | 0 | 0 | When set to Yes, this keeps data connections active when the connection to the LES is lost. |
| 1.3.6.1.4.1.2.6.188.1.7.1.15 | ibmOsaExpATMBestEffortPeakRate | 0 | 0 | Values range from 10-1550 and must be divided by 10 to get the proper value. A value of 1550 indicates 155.0 Mbytes/sec |
| 1.3.6.1.4.1.2.6.188.1.7.1.16 | ibmOsaExpATMConfigMode | 0 | 0 | Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic (1) mode, a clien… |
| 1.3.6.1.4.1.2.6.188.1.7.1.17 | ibmOsaExpATMConfigLanType | 0 | 0 | The logical port type that the user configured the port for |
| 1.3.6.1.4.1.2.6.188.1.7.1.18 | ibmOsaExpATMActualLanType | 0 | 0 | The actual logical port type the port is running in |
| 1.3.6.1.4.1.2.6.188.1.7.1.19 | ibmOsaExpATMConfigMaxDataFrmSz | 0 | 0 | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.2.6.188.1.7.1.20 | ibmOsaExpATMActualMaxDataFrmSz | 0 | 0 | The maximum data frame size (in bytes) which this client will use the next time it returns to the Initial State. Auto-configuring… |
| 1.3.6.1.4.1.2.6.188.1.7.1.21 | ibmOsaExpATMConfigELANName | 0 | 0 | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.22 | ibmOsaExpATMActualELANName | 0 | 0 | The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.23 | ibmOsaExpATMConfigLESATMAddress | 0 | 0 | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When ibmOsaExpATMCo… |
| 1.3.6.1.4.1.2.6.188.1.7.1.24 | ibmOsaExpATMActualLESATMAddress | 0 | 0 | The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode … |
| 1.3.6.1.4.1.2.6.188.1.7.1.25 | ibmOsaExpATMControlTimeout | 0 | 0 | Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere in… |
| 1.3.6.1.4.1.2.6.188.1.7.1.26 | ibmOsaExpATMMaxUnknownFrameCount | 0 | 0 | Maximum Unknown Frame Count. See the description of ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to Initial State Parameter… |
| 1.3.6.1.4.1.2.6.188.1.7.1.27 | ibmOsaExpATMMaxUnknownFrameTime | 0 | 0 | Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.28 | ibmOsaExpATMVCCTimeoutPeriod | 0 | 0 | VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames f… |
| 1.3.6.1.4.1.2.6.188.1.7.1.29 | ibmOsaExpATMMaxRetryCount | 0 | 0 | Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Coun… |
| 1.3.6.1.4.1.2.6.188.1.7.1.30 | ibmOsaExpATMAgingTime | 0 | 0 | Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that… |
| 1.3.6.1.4.1.2.6.188.1.7.1.31 | ibmOsaExpATMForwardDelayTime | 0 | 0 | Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.32 | ibmOsaExpATMExpectedARPRespTime | 0 | 0 | Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take. Used for ret… |
| 1.3.6.1.4.1.2.6.188.1.7.1.33 | ibmOsaExpATMFlushTimeout | 0 | 0 | ibmOsaExpATMFlushtimeout |
| 1.3.6.1.4.1.2.6.188.1.7.1.34 | ibmOsaExpATMPathSwitchingDelay | 0 | 0 | Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been eith… |
| 1.3.6.1.4.1.2.6.188.1.7.1.35 | ibmOsaExpATMLocalSegmentID | 0 | 0 | Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridge… |
| 1.3.6.1.4.1.2.6.188.1.7.1.36 | ibmOsaExpATMMltcstSendVCCType | 0 | 0 | Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This… |
| 1.3.6.1.4.1.2.6.188.1.7.1.37 | ibmOsaExpATMMltcstSendVCCAvgRate | 0 | 0 | Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when estabishing the Multicast Send VCC. Fo… |
| 1.3.6.1.4.1.2.6.188.1.7.1.38 | ibmOsaExpATMMcastSendVCCPeakRate | 0 | 0 | Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. … |
| 1.3.6.1.4.1.2.6.188.1.7.1.39 | ibmOsaExpATMConnectCompleteTimer | 0 | 0 | Connection Complete Timer. Optional. In Connection Establish ment this is the time period in which data or a READY_IND message is… |
| 1.3.6.1.4.1.2.6.188.1.7.1.40 | ibmOsaExpATMClientATMAddress | 0 | 0 | LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Di… |
| 1.3.6.1.4.1.2.6.188.1.7.1.41 | ibmOsaExpATMClientIdentifier | 0 | 0 | LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The… |
| 1.3.6.1.4.1.2.6.188.1.7.1.42 | ibmOsaExpATMClientCurrentState | 0 | 0 | The current state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, this field is … |
| 1.3.6.1.4.1.2.6.188.1.7.1.43 | ibmOsaExpATMLastFailureRespCode | 0 | 0 | Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPO… |
| 1.3.6.1.4.1.2.6.188.1.7.1.44 | ibmOsaExpATMLastFailureState | 0 | 0 | The state this client was in when it updated the 'ibmOsaExpATMLastFailureRespCode'. If 'ibmOsaExpATMLastFailureRespCode' is 'none'… |
| 1.3.6.1.4.1.2.6.188.1.7.1.45 | ibmOsaExpATMProtocol | 0 | 0 | The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.46 | ibmOsaExpATMLeVersion | 0 | 0 | The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs. |
| 1.3.6.1.4.1.2.6.188.1.7.1.47 | ibmOsaExpATMTopologyChange | 0 | 0 | Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age… |
| 1.3.6.1.4.1.2.6.188.1.7.1.48 | ibmOsaExpATMConfigServerATMAddr | 0 | 0 | The ATM address of the LAN Emulation Configuration Server (if known) or 0 (otherwise). In LAN Emulation MIB, the OCTET STRING is … |
| 1.3.6.1.4.1.2.6.188.1.7.1.49 | ibmOsaExpATMConfigSource | 0 | 0 | Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to estab… |
| 1.3.6.1.4.1.2.6.188.1.7.1.50 | ibmOsaExpATMProxyClient | 0 | 0 | Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receiv… |
| 1.3.6.1.4.1.2.6.188.1.7.1.51 | ibmOsaExpATMLePDUOctetsInbound | 0 | 0 | The number of Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.52 | ibmOsaExpATMNonErrLePDUDiscIn | 0 | 0 | The number of Non Error Le PDU Octets received |
| 1.3.6.1.4.1.2.6.188.1.7.1.53 | ibmOsaExpATMErrLePDUDiscIn | 0 | 0 | The number of Errored Le PDU Discards received |
| 1.3.6.1.4.1.2.6.188.1.7.1.54 | ibmOsaExpATMLePDUOctetsOutbound | 0 | 0 | The number of Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.55 | ibmOsaExpATMNonErrLePDUDiscOut | 0 | 0 | The number of Non Error Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.56 | ibmOsaExpATMErrLePDUDiscOut | 0 | 0 | The number of Errored Le PDU Discards sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.57 | ibmOsaExpATMLeARPRequestsOut | 0 | 0 | The number of LE ARP Requests sent |
| 1.3.6.1.4.1.2.6.188.1.7.1.58 | ibmOsaExpATMLeARPRequestsIn | 0 | 0 | The number of LE ARP Requests received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC … |
| 1.3.6.1.4.1.2.6.188.1.7.1.59 | ibmOsaExpATMLeARPRepliesOut | 0 | 0 | The number of LE ARP Responses sent over the LUNI by this LAN Emulation Client. |
| 1.3.6.1.4.1.2.6.188.1.7.1.60 | ibmOsaExpATMLeARPRepliesIn | 0 | 0 | The number of LE ARP Responses received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether… |
| 1.3.6.1.4.1.2.6.188.1.7.1.62 | ibmOsaExpATMControlFramesIn | 0 | 0 | The total number of control packets received by this LAN Emulation Client over the LUNI. |
| 1.3.6.1.4.1.2.6.188.1.7.1.63 | ibmOsaExpATMSVCFailures | 0 | 0 | The total number of outgoing LAN Emulation SVCs which this client tried, but failed, to open; incoming LAN Emulation SVCs which t… |
| 1.3.6.1.4.1.2.6.188.1.7.1.64 | ibmOsaExpATMConfigDirectIntfc | 0 | 0 | The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. O… |
| 1.3.6.1.4.1.2.6.188.1.7.1.65 | ibmOsaExpATMConfigDirectVPI | 0 | 0 | If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to … |
| 1.3.6.1.4.1.2.6.188.1.7.1.66 | ibmOsaExpATMConfigDirectVCI | 0 | 0 | If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to … |
| 1.3.6.1.4.1.2.6.188.1.7.1.67 | ibmOsaExpATMControlDirectIntfc | 0 | 0 | The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.68 | ibmOsaExpATMControlDirectVPI | 0 | 0 | If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.69 | ibmOsaExpATMControlDirectVCI | 0 | 0 | If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.70 | ibmOsaExpATMControlDistIntfc | 0 | 0 | The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this objec… |
| 1.3.6.1.4.1.2.6.188.1.7.1.71 | ibmOsaExpATMControlDistributeVPI | 0 | 0 | If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.72 | ibmOsaExpATMControlDistributeVCI | 0 | 0 | If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.73 | ibmOsaExpATMMulticastSendIntfc | 0 | 0 | The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, th… |
| 1.3.6.1.4.1.2.6.188.1.7.1.74 | ibmOsaExpATMMulticastSendVPI | 0 | 0 | If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.75 | ibmOsaExpATMMulticastSendVCI | 0 | 0 | If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this L… |
| 1.3.6.1.4.1.2.6.188.1.7.1.76 | ibmOsaExpATMMulticastFwdIntfc | 0 | 0 | The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object … |
| 1.3.6.1.4.1.2.6.188.1.7.1.77 | ibmOsaExpATMMulticastForwardVPI | 0 | 0 | If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to thi… |
| 1.3.6.1.4.1.2.6.188.1.7.1.78 | ibmOsaExpATMMulticastForwardVCI | 0 | 0 | If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to thi… |