A user-definable parameter for the bridge for the
designation of a physical location of the bridge.
At the next power-on reset of the bridge, MIB-II
sysLocation will take on the value of this object.
The size of 254 for configuration allows the customer
to clear out a previously defined value by setting a
new value with the size of zero. Thus we
can only store 254 characters since zero characters are
also stored.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
atmBrCfgBridgeLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..254)) ACCESS read-write STATUS mandatory DESCRIPTION "A user-definable parameter for the bridge for the designation of a physical location of the bridge. At the next power-on reset of the bridge, MIB-II sysLocation will take on the value of this object. The size of 254 for configuration allows the customer to clear out a previously defined value by setting a new value with the size of zero. Thus we can only store 254 characters since zero characters are also stored." ::= { atmBrSysCfg 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.10.0 | atmBrCfgBridgeLocation | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.1 | atmBrCfgBridgeName | 1 | 1 | A user-definable name for the bridge. At the next power-on reset of the bridge, MIB-II sysName and atmBrBaseBridgeName will take… |
| 1.3.6.1.4.1.2.6.28.5.1.2 | atmBrCfgMaxBridgeFrameSize | 1 | 1 | This object denotes the maximum frame size that can be transmitted or received on any bridge port. The value is a determining fac… |
| 1.3.6.1.4.1.2.6.28.5.1.3 | atmBrCfgFltDbAgingTime | 1 | 1 | The timeout value, in seconds, used to age entries from the Filter Database. |
| 1.3.6.1.4.1.2.6.28.5.1.4 | atmBrCfgFltDbFullAction | 1 | 1 | This object indicates the action that is to be take when the Filter Database is full. The atmBrBaseTpFdbFullAction will take on t… |
| 1.3.6.1.4.1.2.6.28.5.1.5 | atmBrCfgNumOfFltDbStatEntries | 1 | 1 | This object contains the number of Static entries that will be valid for the Filtering Database after the next power-on reset of … |
| 1.3.6.1.4.1.2.6.28.5.1.6 | atmBrCfgLLCDupSAPs | 1 | 1 | This object specifies how duplicate Source and Destination MAC address values will be handle. If set to forward(1), then normal … |
| 1.3.6.1.4.1.2.6.28.5.1.7 | atmBrCfgDefaultTpFltOrder | 1 | 1 | This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in transpare… |
| 1.3.6.1.4.1.2.6.28.5.1.8 | atmBrCfgDefaultSrFltOrder | 1 | 1 | This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in source-ro… |
| 1.3.6.1.4.1.2.6.28.5.1.9 | atmBrCfgBridgeContact | 1 | 1 | A user-definable parameter for the bridge for the designation of a contact person. At the next power-on reset of the bridge, MIB… |
| 1.3.6.1.4.1.2.6.28.5.1.11 | atmBrCfgBaseType | 1 | 1 | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will… |
| 1.3.6.1.4.1.2.6.28.5.1.15 | atmBrCfgBridgePermanentDbTable | 1 | 5 | This table contains information that will be loaded into the bridge Forwarding Database as static entries the next time the syste… |