This object specifies how duplicate Source and Destination
MAC address values will be handle. If set to forward(1),
then normal bridging of the frame will take place. This
allows for the originating station to perform LLC duplicate
address checking. If set to filter(2), then the frame will
not be bridged.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
atmBrCfgLLCDupSAPs OBJECT-TYPE SYNTAX INTEGER { forward(1), filter(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies how duplicate Source and Destination MAC address values will be handle. If set to forward(1), then normal bridging of the frame will take place. This allows for the originating station to perform LLC duplicate address checking. If set to filter(2), then the frame will not be bridged." ::= { atmBrSysCfg 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.6.0 | atmBrCfgLLCDupSAPs | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.1 | atmBrCfgBridgeName | 1 | 1 | A user-definable name for the bridge. At the next power-on reset of the bridge, MIB-II sysName and atmBrBaseBridgeName will take… |
| 1.3.6.1.4.1.2.6.28.5.1.2 | atmBrCfgMaxBridgeFrameSize | 1 | 1 | This object denotes the maximum frame size that can be transmitted or received on any bridge port. The value is a determining fac… |
| 1.3.6.1.4.1.2.6.28.5.1.3 | atmBrCfgFltDbAgingTime | 1 | 1 | The timeout value, in seconds, used to age entries from the Filter Database. |
| 1.3.6.1.4.1.2.6.28.5.1.4 | atmBrCfgFltDbFullAction | 1 | 1 | This object indicates the action that is to be take when the Filter Database is full. The atmBrBaseTpFdbFullAction will take on t… |
| 1.3.6.1.4.1.2.6.28.5.1.5 | atmBrCfgNumOfFltDbStatEntries | 1 | 1 | This object contains the number of Static entries that will be valid for the Filtering Database after the next power-on reset of … |
| 1.3.6.1.4.1.2.6.28.5.1.7 | atmBrCfgDefaultTpFltOrder | 1 | 1 | This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in transpare… |
| 1.3.6.1.4.1.2.6.28.5.1.8 | atmBrCfgDefaultSrFltOrder | 1 | 1 | This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in source-ro… |
| 1.3.6.1.4.1.2.6.28.5.1.9 | atmBrCfgBridgeContact | 1 | 1 | A user-definable parameter for the bridge for the designation of a contact person. At the next power-on reset of the bridge, MIB… |
| 1.3.6.1.4.1.2.6.28.5.1.10 | atmBrCfgBridgeLocation | 1 | 1 | A user-definable parameter for the bridge for the designation of a physical location of the bridge. At the next power-on reset of… |
| 1.3.6.1.4.1.2.6.28.5.1.11 | atmBrCfgBaseType | 1 | 1 | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will… |
| 1.3.6.1.4.1.2.6.28.5.1.15 | atmBrCfgBridgePermanentDbTable | 1 | 5 | This table contains information that will be loaded into the bridge Forwarding Database as static entries the next time the syste… |