This object specifies the order in which User Filters will
be applied to frames when the ATM LAN Bridge is operating
in source-route mode. The octet string should be read from
left to right. The left most byte reflecting the filter
type that will be applied to the frame first, the second
byte reflecting the filter type that will be applied to
the frame second, etc. Any zero value octet will be
ignored.
The following filter types are represented by the associated
numerical value and are appropriate for source-route bridges:
Hop Count 0x01
MAC Address 0x02
Ring Number 0x03
SNAP 0x04
SSAP 0x06
The remaining bytes not used to specify a filter type should
be zeros.
The agent will not prevent a filter type from appearing more
than once in the filter order octet string. In this situation,
the filtering process will be applied twice for that filter type.
This is a benign, but useless, situation, so it should be avoided.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
atmBrCfgDefaultSrFltOrder OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in source-route mode. The octet string should be read from left to right. The left most byte reflecting the filter type that will be applied to the frame first, the second byte reflecting the filter type that will be applied to the frame second, etc. Any zero value octet will be ignored. The following filter types are represented by the associated numerical value and are appropriate for source-route bridges: Hop Count 0x01 MAC Address 0x02 Ring Number 0x03 SNAP 0x04 SSAP 0x06 The remaining bytes not used to specify a filter type should be zeros. The agent will not prevent a filter type from appearing more than once in the filter order octet string. In this situation, the filtering process will be applied twice for that filter type. This is a benign, but useless, situation, so it should be avoided." ::= { atmBrSysCfg 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.8.0 | atmBrCfgDefaultSrFltOrder | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.1.1 | atmBrCfgBridgeName | 1 | 1 | A user-definable name for the bridge. At the next power-on reset of the bridge, MIB-II sysName and atmBrBaseBridgeName will take… |
| 1.3.6.1.4.1.2.6.28.5.1.2 | atmBrCfgMaxBridgeFrameSize | 1 | 1 | This object denotes the maximum frame size that can be transmitted or received on any bridge port. The value is a determining fac… |
| 1.3.6.1.4.1.2.6.28.5.1.3 | atmBrCfgFltDbAgingTime | 1 | 1 | The timeout value, in seconds, used to age entries from the Filter Database. |
| 1.3.6.1.4.1.2.6.28.5.1.4 | atmBrCfgFltDbFullAction | 1 | 1 | This object indicates the action that is to be take when the Filter Database is full. The atmBrBaseTpFdbFullAction will take on t… |
| 1.3.6.1.4.1.2.6.28.5.1.5 | atmBrCfgNumOfFltDbStatEntries | 1 | 1 | This object contains the number of Static entries that will be valid for the Filtering Database after the next power-on reset of … |
| 1.3.6.1.4.1.2.6.28.5.1.6 | atmBrCfgLLCDupSAPs | 1 | 1 | This object specifies how duplicate Source and Destination MAC address values will be handle. If set to forward(1), then normal … |
| 1.3.6.1.4.1.2.6.28.5.1.7 | atmBrCfgDefaultTpFltOrder | 1 | 1 | This object specifies the order in which User Filters will be applied to frames when the ATM LAN Bridge is operating in transpare… |
| 1.3.6.1.4.1.2.6.28.5.1.9 | atmBrCfgBridgeContact | 1 | 1 | A user-definable parameter for the bridge for the designation of a contact person. At the next power-on reset of the bridge, MIB… |
| 1.3.6.1.4.1.2.6.28.5.1.10 | atmBrCfgBridgeLocation | 1 | 1 | A user-definable parameter for the bridge for the designation of a physical location of the bridge. At the next power-on reset of… |
| 1.3.6.1.4.1.2.6.28.5.1.11 | atmBrCfgBaseType | 1 | 1 | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will… |
| 1.3.6.1.4.1.2.6.28.5.1.15 | atmBrCfgBridgePermanentDbTable | 1 | 5 | This table contains information that will be loaded into the bridge Forwarding Database as static entries the next time the syste… |