If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP re-enters the Available state after the LSP Defect state
exists first.
T1 defines the length of time the LSP is in the Defect state
before declaring an LSP Unavailable or returning to defect
free state.
0: available state;
1: unavailable state.
Parsed from file HUAWEI-MPLSOAM-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSOAM-MIB
hwMplsOamIgrAvaState OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect state exists first. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state. 0: available state; 1: unavailable state." ::= { hwMplsOamIgrEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 | hwMplsOamIgrIndex | 0 | 0 | The interface index of the detected tunnel. |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 | hwMplsOamIgrTunnName | 0 | 0 | The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reve… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 | hwMplsOamIgrDetType | 0 | 0 | There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 | hwMplsOamIgrDetFreq | 0 | 0 | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 | hwMplsOamIgrRevType | 0 | 0 | When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is tra… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 | hwMplsOamIgrRevLspName | 0 | 0 | The object indicates name of the reverse LSP. |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 | hwMplsOamIgrRevLsrId | 0 | 0 | Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address. |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 | hwMplsOamIgrRevSessTunnId | 0 | 0 | Only for ingress, the object indicates the session tunnel ID of the reverse LSP. |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9 | hwMplsOamIgrEnable | 0 | 0 | Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and c… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10 | hwMplsOamIgrValid | 0 | 0 | 0: stop detect; 1: start detect. |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12 | hwMplsOamIgrDefectType | 0 | 0 | Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM info… |
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 | hwMplsOamIgrRowStatus | 0 | 0 | This variable is used to create, modify, and delete a row in this table. |