Defect is defined as interruption of the capability of a
transport entity (e.g., network connection) to transfer user
or OAM information. There are six types of defect:
0: no defect;
1: dServer;
2: dPeerMe;
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect;
6: dExcess, Receiving excess rate of CV/FFD;
7: dUnknown, Unknown defect in the MPLS network..
8: rlsn down;
9: dIngressDown.
Parsed from file HUAWEI-MPLSOAM-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSOAM-MIB
hwMplsOamIgrDefectType OBJECT-TYPE SYNTAX Integer32 (0..9) MAX-ACCESS read-only STATUS current DESCRIPTION "Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM information. There are six types of defect: 0: no defect; 1: dServer; 2: dPeerMe; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network.. 8: rlsn down; 9: dIngressDown." ::= { hwMplsOamIgrEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 | hwMplsOamIgrIndex | 0 | 0 | The interface index of the detected tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 | hwMplsOamIgrTunnName | 0 | 0 | The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reve… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 | hwMplsOamIgrDetType | 0 | 0 | There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 | hwMplsOamIgrDetFreq | 0 | 0 | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 | hwMplsOamIgrRevType | 0 | 0 | When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is tra… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 | hwMplsOamIgrRevLspName | 0 | 0 | The object indicates name of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 | hwMplsOamIgrRevLsrId | 0 | 0 | Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 | hwMplsOamIgrRevSessTunnId | 0 | 0 | Only for ingress, the object indicates the session tunnel ID of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9 | hwMplsOamIgrEnable | 0 | 0 | Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and c… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10 | hwMplsOamIgrValid | 0 | 0 | 0: stop detect; 1: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11 | hwMplsOamIgrAvaState | 0 | 0 | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to b… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 | hwMplsOamIgrRowStatus | 0 | 0 | This variable is used to create, modify, and delete a row in this table. |