Whether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP,and user can set
other configuration.
0: The OAM function is disabled on the ingress;
1: The OAM function is enabled on the ingress.
Parsed from file HUAWEI-MPLSOAM-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSOAM-MIB
hwMplsOamIgrEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP,and user can set other configuration. 0: The OAM function is disabled on the ingress; 1: The OAM function is enabled on the ingress." ::= { hwMplsOamIgrEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 | hwMplsOamIgrIndex | 0 | 0 | The interface index of the detected tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 | hwMplsOamIgrTunnName | 0 | 0 | The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reve… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 | hwMplsOamIgrDetType | 0 | 0 | There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 | hwMplsOamIgrDetFreq | 0 | 0 | For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 | hwMplsOamIgrRevType | 0 | 0 | When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is tra… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 | hwMplsOamIgrRevLspName | 0 | 0 | The object indicates name of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 | hwMplsOamIgrRevLsrId | 0 | 0 | Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 | hwMplsOamIgrRevSessTunnId | 0 | 0 | Only for ingress, the object indicates the session tunnel ID of the reverse LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10 | hwMplsOamIgrValid | 0 | 0 | 0: stop detect; 1: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11 | hwMplsOamIgrAvaState | 0 | 0 | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to b… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12 | hwMplsOamIgrDefectType | 0 | 0 | Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM info… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 | hwMplsOamIgrRowStatus | 0 | 0 | This variable is used to create, modify, and delete a row in this table. |