This object indicates the maximum interval of intelligent-timer for receiving
OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify
hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot
specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value.
Instead, by set the intelligent timer to default value, it will get back to
default configuration.
Parsed from file HUAWEI-OSPFV2-MIB.mib.txt
Company: huawei
Module: HUAWEI-OSPFV2-MIB
hwOspfv2LsaArriveMaxIntvl OBJECT-TYPE SYNTAX Integer32 (-1 | 1..10000) UNITS "millionSecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the maximum interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, but you cannot specify hwOspfv2LsaArriveIntvl. Note that -1 is not a configurable value. Instead, by set the intelligent timer to default value, it will get back to default configuration." DEFVAL { 1000 } ::= { hwOspfv2ProcessEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.155.3.1.1 | hwOspfv2ProcessIdIndex | 0 | 0 | The process ID indicates the OSPF process number. The value ranges from 1 to 65535. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.2 | hwOspfv2VpnName | 0 | 0 | The name of VPN instance to which the process belongs. The process instance needs to be specified when the process is created, an… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.3 | hwOspfv2ConfigRouterId | 0 | 0 | A 32-bit integer uniquely identifies the router in the Autonomous System. OSPF private router ID can be configured through this … |
| 1.3.6.1.4.1.2011.5.25.155.3.1.4 | hwOspfv2ActualRouterId | 0 | 0 | This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, … |
| 1.3.6.1.4.1.2011.5.25.155.3.1.5 | hwOspfv2BandwidthReference | 0 | 0 | The reference value that is used to calculate the link cost. If there is no explicit link cost, OSPF calculates the cost accordi… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.6 | hwOspfv2Description | 0 | 0 | The description of the OSPF process. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.7 | hwOspfv2LsaArriveIntvl | 0 | 0 | To avoid wasting network resources due to network changes, OSPF defines that the interval for receiving LSAs is 1 second. In a st… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.9 | hwOspfv2LsaArriveStartIntvl | 0 | 0 | This object indicates the initial interval of intelligent-timer for receiving OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is spe… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.10 | hwOspfv2LsaArriveHoldIntvl | 0 | 0 | This object indicates the Holdtime interval of intelligent-timer for receiving OSPF LSAs. After an intelligent timer is enabled,… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.11 | hwOspfv2LsaOrigIntvl | 0 | 0 | To avoid wasting network source due to network changes, OSPF defines that the interval for updating LSAs is 5 seconds. In a stabl… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.12 | hwOspfv2LsaOrigMaxIntvl | 0 | 0 | This object indicates the maximum interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specifie… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.13 | hwOspfv2LsaOrigStartIntvl | 0 | 0 | This object indicates the initial interval of intelligent-timer for updating OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specif… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.14 | hwOspfv2LsaOrigHoldIntvl | 0 | 0 | This object indicates the Holdtime interval of intelligent-timer for updating OSPF LSAs. After an intelligent timer is enabled, … |
| 1.3.6.1.4.1.2011.5.25.155.3.1.15 | hwOspfv2LsaOrigIntvlOtherType | 0 | 0 | This object indicates the interval for updating LSAs, excluding OSPF router LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.16 | hwOspfv2LsdbOverflowLimit | 0 | 0 | The maximum number of external LSAs in OSPF LSDB. When this node is set to 0, it means that no limits exist. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.17 | hwOspfv2MaxLoadBalaNumber | 0 | 0 | The maximum number of equal-cost routes to a destination in the routing table. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.18 | hwOspfv2AseRouteMaxNumber | 0 | 0 | The maximum number of ASE routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.19 | hwOspfv2InterRouteMaxNumber | 0 | 0 | The maximum number of inter-area routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.20 | hwOspfv2IntraRouteMaxNumber | 0 | 0 | The maximum number of intra-area routes that are supported by OSPF. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.21 | hwOspfv2RetransLimitMaxNumber | 0 | 0 | The maximum count of retransmission. The value is an integer that ranges from 2 to 255. When the retransmission limit is disable… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.22 | hwOspfv2Rfc1583Compatibility | 0 | 0 | It is used to enable the routing rule for compatible RFC 1583. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.23 | hwOspfv2ShamHello | 0 | 0 | It is used to enable the sham-hello feature of OSPF. After the feature is enabled, OSPF updates the timeout timer of the neighbo… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.24 | hwOspfv2SpfSchIntvlUnit | 0 | 0 | The value of the object identifies the interval unit for OSPF to calculate routes. This object must be specified together with h… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.25 | hwOspfv2SpfSchIntvlNumber | 0 | 0 | The value of the object identifies the interval for OSPF to calculate routes. This object must be specified together with hwOspf… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.26 | hwOspfv2SpfSchMaxIntvl | 0 | 0 | This object indicates the maximum interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchMaxI… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.27 | hwOspfv2SpfSchStartIntvl | 0 | 0 | This object indicates the initial interval of intelligent timer for OSPF to perform the SPF calculation. When hwOspfv2SpfSchStar… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.28 | hwOspfv2SpfSchHoldIntvl | 0 | 0 | This object indicates the Holdtime interval of intelligent timer for OSPF to perform the SPF calculation. After an intelligent t… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.29 | hwOspfv2OpaqueCapability | 0 | 0 | It is used to enable opaque-LSAs capability. When the capability is enabled, then the OSPF process can generate opaque LSAs and … |
| 1.3.6.1.4.1.2011.5.25.155.3.1.30 | hwOspfv2TrafficAdjustment | 0 | 0 | It is used to enable IGP-shortcut feature. The value false means disable. Otherwise, the value true means enable. If you want to… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.31 | hwOspfv2TrafficAdvertise | 0 | 0 | It is used to enable IGP-shortcut and Forwarding Adjacency feature. |
| 1.3.6.1.4.1.2011.5.25.155.3.1.32 | hwOspfv2FlushTimer | 0 | 0 | The value of the flush timer. When configuring or undoing OSPF process, flush self-originated LSAs first. If the timer expires, s… |
| 1.3.6.1.4.1.2011.5.25.155.3.1.33 | hwOspfv2ProcessRowStatus | 0 | 0 | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to crea… |