The node is used to enable the MPLS-TE capability.
disable(1): no configuration.
stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected
if it has more than one Top level TLV.
stdDisable(3): accepts the LSAs not in the standard format.
Parsed from file HUAWEI-OSPFV2-MIB.mib.txt
Company: huawei
Module: HUAWEI-OSPFV2-MIB
hwOspfv2AreaMplsTe OBJECT-TYPE SYNTAX INTEGER { disable(1), stdEnable(2), stdDisable(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected if it has more than one Top level TLV. stdDisable(3): accepts the LSAs not in the standard format." DEFVAL { disable } ::= { hwOspfv2AreaEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.155.4.1.1 | hwOspfv2AreaIdIndex | 0 | 0 | A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.2 | hwOspfv2AreaType | 0 | 0 | Specify the type of area: nssa(1), stub(2), normal(3). |
| 1.3.6.1.4.1.2011.5.25.155.4.1.3 | hwOspfv2AreaNoSummary | 0 | 0 | This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.4 | hwOspfv2AreaNssaFlushTimer | 0 | 0 | The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.5 | hwOspfv2AreaNssaDefAdvertise | 0 | 0 | This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it m… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.6 | hwOspfv2AreaNssaNoImportRoute | 0 | 0 | This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the exter… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.7 | hwOspfv2AreaNssaTransAlways | 0 | 0 | This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NS… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.8 | hwOspfv2AreaNssaTransTimer | 0 | 0 | This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and pr… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.9 | hwOspfv2AreaNssaAllowFaZero | 0 | 0 | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LS… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.10 | hwOspfv2AreaNssaSuppressFa | 0 | 0 | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.11 | hwOspfv2AreaNssaSetNBit | 0 | 0 | When this node is set to true, N-bit should be set in the option when sending DD packets. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.12 | hwOspfv2AreaDefCost | 0 | 0 | This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.13 | hwOspfv2AreaDescription | 0 | 0 | This node is used to specify the description of the area. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.14 | hwOspfv2AreaFilterExpAcl | 0 | 0 | This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no con… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.15 | hwOspfv2AreaFilterExpPrefix | 0 | 0 | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to fil… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.16 | hwOspfv2AreaFilterExpPolicy | 0 | 0 | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.17 | hwOspfv2AreaFilterImpAcl | 0 | 0 | This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configu… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.18 | hwOspfv2AreaFilterImpPrefix | 0 | 0 | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to fil… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.19 | hwOspfv2AreaFilterImpPolicy | 0 | 0 | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.20 | hwOspfv2AreaAuthModeType | 0 | 0 | The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.21 | hwOspfv2AreaAuthPasswordType | 0 | 0 | Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain t… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.22 | hwOspfv2AreaAuthKeyId | 0 | 0 | Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.23 | hwOspfv2AreaAuthText | 0 | 0 | In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 c… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.25 | hwOspfv2AreaAreaRowStatus | 0 | 0 | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to cre… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.26 | hwOspfv2AreaFilterExpAclName | 0 | 0 | This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LS… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.27 | hwOspfv2AreaFilterImpAclName | 0 | 0 | This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LS… |