This object indicates the ACL name. Note that the ACL can only be used as basic ACL.
The object is used to filter the Summary LSAs that leave the area.
It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpPrefix,
and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time.
Parsed from file HUAWEI-OSPFV2-MIB.mib.txt
Company: huawei
Module: HUAWEI-OSPFV2-MIB
hwOspfv2AreaFilterExpAclName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LSAs that leave the area. It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilterExpPrefix, and hwOspfv2AreaFilterExpPolicy. Only one object can be configured each time." DEFVAL { ''b } ::= { hwOspfv2AreaEntry 26 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.155.4.1.1 | hwOspfv2AreaIdIndex | 0 | 0 | A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.2 | hwOspfv2AreaType | 0 | 0 | Specify the type of area: nssa(1), stub(2), normal(3). |
| 1.3.6.1.4.1.2011.5.25.155.4.1.3 | hwOspfv2AreaNoSummary | 0 | 0 | This node is used to reduce the number of LSAs that are transmitted to the NSSA or Stub area. You can configure this node as an … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.4 | hwOspfv2AreaNssaFlushTimer | 0 | 0 | The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated Type-5 and Type-7 LSAs first. If th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.5 | hwOspfv2AreaNssaDefAdvertise | 0 | 0 | This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it m… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.6 | hwOspfv2AreaNssaNoImportRoute | 0 | 0 | This node is used to decide whether the external route is imported to NSSA area. On ASBR, if this node is set to true, the exter… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.7 | hwOspfv2AreaNssaTransAlways | 0 | 0 | This node specifies whether or not an NSSA router will unconditionally translate Type-7 LSAs to Type-5 LSAs when acting as an NS… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.8 | hwOspfv2AreaNssaTransTimer | 0 | 0 | This node is used to configure translator stability interval. This minimizes excessive flushing of translated Type-7 LSAs and pr… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.9 | hwOspfv2AreaNssaAllowFaZero | 0 | 0 | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the router generates Type-7 LS… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.10 | hwOspfv2AreaNssaSuppressFa | 0 | 0 | When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero when the ABR translates Type-7 LSAs… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.11 | hwOspfv2AreaNssaSetNBit | 0 | 0 | When this node is set to true, N-bit should be set in the option when sending DD packets. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.12 | hwOspfv2AreaDefCost | 0 | 0 | This node is used to specify the cost of the default routes that flush to stub area by the ABR. The value ranges from 0 to 16777… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.13 | hwOspfv2AreaDescription | 0 | 0 | This node is used to specify the description of the area. |
| 1.3.6.1.4.1.2011.5.25.155.4.1.14 | hwOspfv2AreaFilterExpAcl | 0 | 0 | This object indicates the number of basic ACL. The ACL number ranges from 2000 to 2999. The default value is 0, indicating no con… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.15 | hwOspfv2AreaFilterExpPrefix | 0 | 0 | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to fil… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.16 | hwOspfv2AreaFilterExpPolicy | 0 | 0 | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.17 | hwOspfv2AreaFilterImpAcl | 0 | 0 | This object indicates the number of basic ACL. The value ranges from 2000 to 2999. The default value is 0, indicating no configu… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.18 | hwOspfv2AreaFilterImpPrefix | 0 | 0 | This object indicates the name of the address prefix list. The name is a string of 1 to 169 characters. The object is used to fil… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.19 | hwOspfv2AreaFilterImpPolicy | 0 | 0 | This object indicates the name of the routing policy. The name is a string of 1 to 40 characters. The object is used to filter th… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.20 | hwOspfv2AreaAuthModeType | 0 | 0 | The type of the OSPF area authentication mode. none(1): not configured. simple(2): indicates the simple authentication mode. md5(3… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.21 | hwOspfv2AreaAuthPasswordType | 0 | 0 | Specify the type of area authentication key. plaintext(2): If this node is set to plaintext(2), you can specify only the plain t… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.22 | hwOspfv2AreaAuthKeyId | 0 | 0 | Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode. The value of the ID is an integer that ranges from 1 … |
| 1.3.6.1.4.1.2011.5.25.155.4.1.23 | hwOspfv2AreaAuthText | 0 | 0 | In simple authentication, this object indicates the authentication key. It's a string of 1 to 8 characters in plain text or 24 c… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.24 | hwOspfv2AreaMplsTe | 0 | 0 | The node is used to enable the MPLS-TE capability. disable(1): no configuration. stdEnable(2): accepts only the LSAs in the stand… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.25 | hwOspfv2AreaAreaRowStatus | 0 | 0 | This node is used to create and destroy rows. Because CreateAndWait is not supported, you can set this node to CreatAndGo to cre… |
| 1.3.6.1.4.1.2011.5.25.155.4.1.27 | hwOspfv2AreaFilterImpAclName | 0 | 0 | This object indicates the ACL name. Note that the ACL can only be used as basic ACL. The object is used to filter the Summary LS… |