This value indicates the frequency of the pulse tone. The following
frequencies are supported, with zero (0) disabling pulse metering:
Integer Value Meaning
12000 12 KHz pulse metering tone
16000 16 KHz pulse metering tone
8000 8 KHz US EBS backplane tone
0 pulse-metering disabled
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
This value indicates the frequency of the pulse tone. The following
frequencies are supported, with zero (0) disabling pulse metering:
Integer Value Meaning
12000 12 KHz pulse metering tone
16000 16 KHz pulse metering tone
8000 8 KHz US EBS backplane tone
0 pulse-metering disabled
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
umc1SystemSysProvPsuPulseMeterTone OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the frequency of the pulse tone. The following frequencies are supported, with zero (0) disabling pulse metering: Integer Value Meaning 12000 12 KHz pulse metering tone 16000 16 KHz pulse metering tone 8000 8 KHz US EBS backplane tone 0 pulse-metering disabled " ::= { umc1SystemSysProv 4 }
umc1SystemSysProvPsuPulseMeterTone OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the frequency of the pulse tone. The following frequencies are supported, with zero (0) disabling pulse metering: Integer Value Meaning 12000 12 KHz pulse metering tone 16000 16 KHz pulse metering tone 8000 8 KHz US EBS backplane tone 0 pulse-metering disabled " ::= { umc1SystemSysProv 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.2.4.0 | umc1SystemSysProvPsuPulseMeterTone | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.2.1 | umc1SystemSysProvBerTable | 1 | 5 | This table stores BER provisioning information per Plug-In Type. Access to this Table is read-write. By implementation, this tab… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.2 | umc1SystemSysProvSystemCcsThresh | 1 | 1 | The range of allowable values is zero (0) through thirty-seven (37) in steps of one (1). |
| 1.3.6.1.4.1.2067.1.1.2.1.2.3 | umc1SystemSysProvPsuRingVoltage | 1 | 1 | This number indicates the number of Volts; the following voltage levels are supported: Integer Value Meaning 60 60 Volts 65 65… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.5 | umc1SystemSysProvPsuRingFreq | 1 | 1 | This value is equal to the Ring Frequency Hertz multiplied by ten (10); the following values are supported: Integer Value … |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6 | umc1SystemSysProvChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of System Global Provisioning information with that managed b… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.7 | umc1SystemSysProvTableChangeSeqNum | 1 | 1 | A sequence number used to indicate that the Global System Provisioning Table, umc1SystemSysProvTable, has been modified and it n… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.8 | umc1SystemSysProvACOConfig | 1 | 1 | This object defines the configuration of the system-wide alarm cut-off (ACO) button. It could be UMC_Mode, Standard_Mode, or Exte… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.9 | umc1SystemSysTimingSource | 1 | 1 | This object is used to access or modify the timing source used by the UMC system. OPEN ISSUE: We will add the description once we… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.10 | umc1SystemSysTemperature | 1 | 1 | This object is used to access get the current temperature of the terminal that houses the IPMI Agent. OPEN ISSUE: We will change … |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11 | umc1SystemSysProvCATable | 1 | 3 | The EMS uses this table to access and update the channel attributes associated with ADSL port in the system or the channel attri… |