A sequence number used to indicate that the Global System Provisioning
Table, umc1SystemSysProvTable, has been modified and it needs to be
re-read. Whenever the SNMP agent is restarted, this value will be reset
to 0(zero). The value will be incremented by one whenever a change to
the Global System Provisioning Table has been made. This number will
also be sent in the umc1TrapSysProvChgTableChangeUpd trap and can be
used to determine if any traps have been lost by the manager. This
value will be incremented before the trap is sent.
The maximum value it can assume is 2,147,483,647. An increment,
every time it has reached its maximum value, shall cause it to
be reset to 1.
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
A sequence number used to indicate that the Global System Provisioning
Table, umc1SystemSysProvTable, has been modified and it needs to be
re-read. Whenever the SNMP agent is restarted, this value will be reset
to 0(zero). The value will be incremented by one whenever a change to
the Global System Provisioning Table has been made. This number will
also be sent in the umc1TrapSysProvChgTableChangeUpd trap and can be
used to determine if any traps have been lost by the manager. This
value will be incremented before the trap is sent.
The maximum value it can assume is 2,147,483,647. An increment,
every time it has reached its maximum value, shall cause it to
be reset to 1.
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
umc1SystemSysProvTableChangeSeqNum OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number used to indicate that the Global System Provisioning Table, umc1SystemSysProvTable, has been modified and it needs to be re-read. Whenever the SNMP agent is restarted, this value will be reset to 0(zero). The value will be incremented by one whenever a change to the Global System Provisioning Table has been made. This number will also be sent in the umc1TrapSysProvChgTableChangeUpd trap and can be used to determine if any traps have been lost by the manager. This value will be incremented before the trap is sent. The maximum value it can assume is 2,147,483,647. An increment, every time it has reached its maximum value, shall cause it to be reset to 1. " ::= { umc1SystemSysProv 7 }
umc1SystemSysProvTableChangeSeqNum OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A sequence number used to indicate that the Global System Provisioning Table, umc1SystemSysProvTable, has been modified and it needs to be re-read. Whenever the SNMP agent is restarted, this value will be reset to 0(zero). The value will be incremented by one whenever a change to the Global System Provisioning Table has been made. This number will also be sent in the umc1TrapSysProvChgTableChangeUpd trap and can be used to determine if any traps have been lost by the manager. This value will be incremented before the trap is sent. The maximum value it can assume is 2,147,483,647. An increment, every time it has reached its maximum value, shall cause it to be reset to 1. " ::= { umc1SystemSysProv 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.2.7.0 | umc1SystemSysProvTableChangeSeqNum | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2067.1.1.2.1.2.1 | umc1SystemSysProvBerTable | 1 | 5 | This table stores BER provisioning information per Plug-In Type. Access to this Table is read-write. By implementation, this tab… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.2 | umc1SystemSysProvSystemCcsThresh | 1 | 1 | The range of allowable values is zero (0) through thirty-seven (37) in steps of one (1). |
| 1.3.6.1.4.1.2067.1.1.2.1.2.3 | umc1SystemSysProvPsuRingVoltage | 1 | 1 | This number indicates the number of Volts; the following voltage levels are supported: Integer Value Meaning 60 60 Volts 65 65… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.4 | umc1SystemSysProvPsuPulseMeterTone | 1 | 1 | This value indicates the frequency of the pulse tone. The following frequencies are supported, with zero (0) disabling pulse met… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.5 | umc1SystemSysProvPsuRingFreq | 1 | 1 | This value is equal to the Ring Frequency Hertz multiplied by ten (10); the following values are supported: Integer Value … |
| 1.3.6.1.4.1.2067.1.1.2.1.2.6 | umc1SystemSysProvChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of System Global Provisioning information with that managed b… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.8 | umc1SystemSysProvACOConfig | 1 | 1 | This object defines the configuration of the system-wide alarm cut-off (ACO) button. It could be UMC_Mode, Standard_Mode, or Exte… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.9 | umc1SystemSysTimingSource | 1 | 1 | This object is used to access or modify the timing source used by the UMC system. OPEN ISSUE: We will add the description once we… |
| 1.3.6.1.4.1.2067.1.1.2.1.2.10 | umc1SystemSysTemperature | 1 | 1 | This object is used to access get the current temperature of the terminal that houses the IPMI Agent. OPEN ISSUE: We will change … |
| 1.3.6.1.4.1.2067.1.1.2.1.2.11 | umc1SystemSysProvCATable | 1 | 3 | The EMS uses this table to access and update the channel attributes associated with ADSL port in the system or the channel attri… |