This value is equal to the Ring Frequency Hertz multiplied by ten (10);
the following values are supported:
Integer Value Meaning
167 16.7 Hz
177 17.7 Hz
187 18.7 Hz
200 20.0 Hz
210 21.0 Hz
223 22.3 Hz
235 23.5 Hz
250 25.0 Hz
264 26.4 Hz
280 28.0 Hz
298 29.8 Hz
316 31.6 Hz
333 33.3 Hz
354 35.4 Hz
376 37.6 Hz
400 40.0 Hz
422 42.2 Hz
444 44.4 Hz
474 47.4 Hz
500 50.0 Hz
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
This value is equal to the Ring Frequency Hertz multiplied by ten (10);
the following values are supported:
Integer Value Meaning
167 16.7 Hz
177 17.7 Hz
187 18.7 Hz
200 20.0 Hz
210 21.0 Hz
223 22.3 Hz
235 23.5 Hz
250 25.0 Hz
264 26.4 Hz
280 28.0 Hz
298 29.8 Hz
316 31.6 Hz
333 33.3 Hz
354 35.4 Hz
376 37.6 Hz
400 40.0 Hz
422 42.2 Hz
444 44.4 Hz
474 47.4 Hz
500 50.0 Hz
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
umc1SystemSysProvPsuRingFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This value is equal to the Ring Frequency Hertz multiplied by ten (10); the following values are supported: Integer Value Meaning 167 16.7 Hz 177 17.7 Hz 187 18.7 Hz 200 20.0 Hz 210 21.0 Hz 223 22.3 Hz 235 23.5 Hz 250 25.0 Hz 264 26.4 Hz 280 28.0 Hz 298 29.8 Hz 316 31.6 Hz 333 33.3 Hz 354 35.4 Hz 376 37.6 Hz 400 40.0 Hz 422 42.2 Hz 444 44.4 Hz 474 47.4 Hz 500 50.0 Hz " ::= { umc1SystemSysProv 5 }
umc1SystemSysProvPsuRingFreq OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This value is equal to the Ring Frequency Hertz multiplied by ten (10); the following values are supported: Integer Value Meaning 167 16.7 Hz 177 17.7 Hz 187 18.7 Hz 200 20.0 Hz 210 21.0 Hz 223 22.3 Hz 235 23.5 Hz 250 25.0 Hz 264 26.4 Hz 280 28.0 Hz 298 29.8 Hz 316 31.6 Hz 333 33.3 Hz 354 35.4 Hz 376 37.6 Hz 400 40.0 Hz 422 42.2 Hz 444 44.4 Hz 474 47.4 Hz 500 50.0 Hz " ::= { umc1SystemSysProv 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2067.1.1.2.1.2.5.0 | umc1SystemSysProvPsuRingFreq | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2067.1.1.2.1.2.1 | umc1SystemSysProvBerTable | 1 | 5 | This table stores BER provisioning information per Plug-In Type. Access to this Table is read-write. By implementation, this tab… |
1.3.6.1.4.1.2067.1.1.2.1.2.2 | umc1SystemSysProvSystemCcsThresh | 1 | 1 | The range of allowable values is zero (0) through thirty-seven (37) in steps of one (1). |
1.3.6.1.4.1.2067.1.1.2.1.2.3 | umc1SystemSysProvPsuRingVoltage | 1 | 1 | This number indicates the number of Volts; the following voltage levels are supported: Integer Value Meaning 60 60 Volts 65 65… |
1.3.6.1.4.1.2067.1.1.2.1.2.4 | umc1SystemSysProvPsuPulseMeterTone | 1 | 1 | This value indicates the frequency of the pulse tone. The following frequencies are supported, with zero (0) disabling pulse met… |
1.3.6.1.4.1.2067.1.1.2.1.2.6 | umc1SystemSysProvChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of System Global Provisioning information with that managed b… |
1.3.6.1.4.1.2067.1.1.2.1.2.7 | umc1SystemSysProvTableChangeSeqNum | 1 | 1 | A sequence number used to indicate that the Global System Provisioning Table, umc1SystemSysProvTable, has been modified and it n… |
1.3.6.1.4.1.2067.1.1.2.1.2.8 | umc1SystemSysProvACOConfig | 1 | 1 | This object defines the configuration of the system-wide alarm cut-off (ACO) button. It could be UMC_Mode, Standard_Mode, or Exte… |
1.3.6.1.4.1.2067.1.1.2.1.2.9 | umc1SystemSysTimingSource | 1 | 1 | This object is used to access or modify the timing source used by the UMC system. OPEN ISSUE: We will add the description once we… |
1.3.6.1.4.1.2067.1.1.2.1.2.10 | umc1SystemSysTemperature | 1 | 1 | This object is used to access get the current temperature of the terminal that houses the IPMI Agent. OPEN ISSUE: We will change … |
1.3.6.1.4.1.2067.1.1.2.1.2.11 | umc1SystemSysProvCATable | 1 | 3 | The EMS uses this table to access and update the channel attributes associated with ADSL port in the system or the channel attri… |