The hub will generate SAP broadcasts over IPX. This allows the hub to
be auto-discovered by Novell's NMS and is used to generate IPX traps. By
setting this object to do-ipx-SAP-Bcast(2) the hub will generate SAP
broadcasts at a rate of every 55 seconds if a Novell server is present on
the network. By setting this object to no-ipx-SAP-Bcasts(1) the hub will
not generate SAP broadcasts. IPX traps may not be generated if this object
is set to no-ipx-SAP-Bcasts(1). This object has no effect on other IPX
communication to the hub. DURABLE
Parsed from file Compaq-Mdc100.mib.txt
Company: compaq
Module: NETWORTH-FastEthernet-MDC100-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
mdcIPXSAPBroadcast OBJECT-TYPE SYNTAX INTEGER { no-ipx-SAP-Bcast(1), do-ipx-SAP-Bcast(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The hub will generate SAP broadcasts over IPX. This allows the hub to be auto-discovered by Novell's NMS and is used to generate IPX traps. By setting this object to do-ipx-SAP-Bcast(2) the hub will generate SAP broadcasts at a rate of every 55 seconds if a Novell server is present on the network. By setting this object to no-ipx-SAP-Bcasts(1) the hub will not generate SAP broadcasts. IPX traps may not be generated if this object is set to no-ipx-SAP-Bcasts(1). This object has no effect on other IPX communication to the hub. DURABLE" ::= { mdcModuleInfo 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.215.1.1.7.2.14.0 | mdcIPXSAPBroadcast | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.215.1.1.7.2.1 | mdcThisAgent | 1 | 1 | The position of the MDC in this stack of units. Note that the top unit in the stack is unit #1 |
| 1.3.6.1.4.1.215.1.1.7.2.2 | mdcPreBootMajorVer | 1 | 1 | The major number of the Pre-Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object wou… |
| 1.3.6.1.4.1.215.1.1.7.2.3 | mdcPreBootMinorVer | 1 | 1 | The minor number of the Pre-Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object wou… |
| 1.3.6.1.4.1.215.1.1.7.2.4 | mdcBootMajorVer | 1 | 1 | The major number of the Boot Block Flash version. For example, if the firmware version is 2.12, the value of this object would b… |
| 1.3.6.1.4.1.215.1.1.7.2.5 | mdcBootMinorVer | 1 | 1 | The minor number of the Boot Flash Block version. For example, if the firmware version is 2.12, the value of this object would b… |
| 1.3.6.1.4.1.215.1.1.7.2.6 | mdcRuntimeMajorVer | 1 | 1 | The major number of the Runtime Flash Block version. For example, if the firmware version is 2.12, the value of this object woul… |
| 1.3.6.1.4.1.215.1.1.7.2.7 | mdcRuntimeMinorVer | 1 | 1 | The minor number of the Runtime Flash Block version. For example, if the firmware version is 2.12, the value of this object woul… |
| 1.3.6.1.4.1.215.1.1.7.2.8 | mdcBootWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the Boot block on the FLASH PROM chip. |
| 1.3.6.1.4.1.215.1.1.7.2.9 | mdcRuntimeWriteCycles | 1 | 1 | This object will allow the user to see the number of erase/writes that have been made to the RunTime block on the FLASH PROM chi… |
| 1.3.6.1.4.1.215.1.1.7.2.10 | mdcWriteCommunity | 1 | 1 | The write community name for the Management Agent. If the value is not public, the write community name is not returned for get … |
| 1.3.6.1.4.1.215.1.1.7.2.11 | mdcWriteProtect | 1 | 1 | When set to ro(2), all supported MIB objects, with the exception of this object are made read only. This may be used in conjunct… |
| 1.3.6.1.4.1.215.1.1.7.2.12 | mdcIPFrameType | 1 | 1 | Except when booting up, a hub will communicate over IP using a single frame type defining the type of network that the IP traffi… |
| 1.3.6.1.4.1.215.1.1.7.2.13 | mdcIPXFrameType | 1 | 1 | The frame type over which IPX communication originating from the MDC100 will take place. The unit will respond to a packet using… |
| 1.3.6.1.4.1.215.1.1.7.2.15 | mdcIPAutoDiscoveryState | 1 | 1 | This object will allow a user to enable the unit to send out periodic ICMP Pings to ensure that the unit's IP Address is contain… |
| 1.3.6.1.4.1.215.1.1.7.2.16 | mdcPingPacketRate | 1 | 1 | This object will determine the rate (in seconds) at which ICMP Pings will be sent out by the unit to ensure that its IP Address … |
| 1.3.6.1.4.1.215.1.1.7.2.17 | mdcBootpRarpRetries | 1 | 1 | This object will allow the user to set the number of BOOTP/RARP retries that will be performed when the unit goes through its Bo… |
| 1.3.6.1.4.1.215.1.1.7.2.18 | mdcBootpRarpRetryInterval | 1 | 1 | This object will allow the user to set the time period (in seconds) after which a BOOTP/RARP attempt will time out and the unit … |
| 1.3.6.1.4.1.215.1.1.7.2.19 | mdcBootpRarpRequests | 1 | 1 | This object allows the user to enable/disable generation of BOOTP/RARP requests from the Hub in BOTH Boot and RunTime code. In B… |
| 1.3.6.1.4.1.215.1.1.7.2.20 | mdcVT100ScreenRefresh | 1 | 1 | This object will determine the rate, in seconds, at which the VT100 screen will refresh (i.e, update) the automatic fields (e.g.… |
| 1.3.6.1.4.1.215.1.1.7.2.21 | mdcRptrReset | 1 | 1 | Setting this object to reset(2) causes the unit to reset the management agent but retains the counter values. All non-durable in… |
| 1.3.6.1.4.1.215.1.1.7.2.22 | mdcModemInitString | 1 | 1 | This object provides a Modem Initialization String input which will be used to initialize a modem to the proper configuration. T… |
| 1.3.6.1.4.1.215.1.1.7.2.23 | mdcModemAutoNegotiateState | 1 | 1 | If enabled(1), then the MDC100 will adjust its speed to that specified when the modem answers the incoming connection. If the mo… |